• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.2
• /
• pp.124-132
• /
• 1987

In this paper, a new Open and Closed Loop Alternation(OCLA) frequency synthesizer is developed to eliminate a frequency error occurring in the transition state of a frequency hopping. This frequency synthesizer consists of a phase comparator(PC), two low pass filters(LPF), two voltage controlled oscillators(VCO), switching elements, a programmable divider and frequency hopping controller, and the stabilized output frequency can be obtained by switching performance. In addigion, it can be found that the characteristic of its circuit construction makes it easy to attach an external circuitry to the open loop.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.4
• /
• pp.603-610
• /
• 2008

In this paper, analytical methods for calculating the average probability of bit error of direct sequence pulse amplitude modulation ultra wideband (DS-PAM UWB) system and time hopping pulse position modulation ultra wideband (TH-PPM UWB) system are given. For the multi-user DS-PAM UWB system, the bipolar pulse amplitude modulation is used in order to achieve better performance. As we know, more attention is paid to the TH-PPM UWB systems recently. In this paper. we first introduce the accurate BER calculation methods of the multi-user DS-PAM UWB and TH-PPM UWB systems and then give the performance analysis over the ideal AWGN channel and a correlation receiver. Furthermore, we also introduce their applications in image transmission and data transmission and give the simulation results. The analytical method yields simple and exact formulas relating the performance to the system parameters.

• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.198-202
• /
• 1998

We have studied $Al_xFe_{3-x}O_4$ produced by direct composition method using X-ray diffraction and Mssbauer spectroscopy. The cation distribution for $Al_xFe_{3-x}O_4$ was determined by the ratio of sub-spectra absorption area. The charge state of Fe atoms in octahedral site(B-site) is $Fe^{2.5+}$ based on electron hopping, $Fe^{2+}$ ↔ $(Fe^{3+},Al^{3+})$ without dependency of substituted Al amounts.

• Journal of Communications and Networks
• /
• v.15 no.6
• /
• pp.601-605
• /
• 2013

The performance of M-ary turbo coded synchronous, fast frequency-hopping spread spectrum multiple-access (FHSS-MA) networks with M-ary frequency shift keying (MFSK) and noncoherent detection is analyzed under Rayleigh fading. Results indicate that M-ary turbo codes dramatically enhance the performance of FHSS-MA networks using MFSK compared to binary turbo codes.

• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.843-847
• /
• 1999

The dc resistivity dc magnetization and thermopower of layered perovskite La1.6Ca1.4Mn2O7.07 have been studied. The ceramic sample of La1.6Ca1.4Mn2O7.07 undergoes the metal-insulator transition at 120K while a first-order phase transition from a ferromagnetic phase to a paramagnetic phae is observed at 260 K=TC This behavior is quite different from that of the well-known double exchange ferromagnets such as La1-xCaxMnO3 This phenomenon could be understood by considering the effects of the anisotropic double exchange interaction caused by two dimensional Mn-O-Mn networks in this materials. The dc magnetization between 120K and 250K is nearly constant and decreases rapidly with increasing temperature above 250K The measurements of dc resistivity and thermopower indicate that Zener polaron hopping conduction takes place above 260 K.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.771-776
• /
• 2014

In this paper, an agile programmable chirp spread spectrum generator for wideband frequency-jamming applications from 20 MHz to 3 GHz is proposed. A frequency-mixing architecture using two voltage-controlled oscillators is used to achieve a wideband operating frequency range, and the direct digital synthesizer (DDS)-based chirping method with a two-point modulation technique is employed to provide a programmable and consistent chirp bandwidth. The proposed signal generator provides the various programmable FM signals from 20 MHz to 3 GHz with a modulation bandwidth from 0 to 400 MHz. The prototype successfully demonstrates arbitrary sequential jamming operation with a fast band-to-band hopping time of < 10 ${\mu}sec$.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.253-256
• /
• 2008

In this paper, we analyze the performance of RAKE receiver for impulse radio-ultra wide band (IR-UWB) systems in indoor multipath radio channel. Pulse position modulation-time hopping (PPM-TH) signal is considered. And we also consider three types of RAKE receivers, which are ideal RAKE, selective RAKE, and partial RAKE receivers. The indoor channel is modeled as the modified Saleh and Valenzuela (SV) model which has been proposed as a UWB channel model by the IEEE group, IEEE 802.15.SG3a.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.429-432
• /
• 2008

In this paper, performance of a double binary turbo coded ultra wide band (UWB) system is analyzed and simulated in an indoor wireless channel. Binary pulse position modulation-time hopping (BPPM-TH) signals are considered. The indoor wireless channel is modeled as a modified Saleh and Valenzuela (SV) channel. The performance is evaluated in terms of bit error probability (BER). From the simulation results, it is seen that double binary turbo coding offers considerable coding gain with reasonable encoding complexity. It is also demonstrated that the performance of the UWB system can be substantially improved by increasing the number of iterations.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.39-42
• /
• 2008

In this paper, we analyze the performance of ultra wide band (UWB) systems in indoor wireless channel in accordance with the number of pulses per bit at transmit signals and the decision types of receiver. The indoor channel is modeled as the modified Saleh and Valenzuela (SV) model which has been proposed as a UWB channel model by the IEEE group, IEEE 802.15.SG3a. Two types of UWB signals are considered One is the pulse position modulation-time hopping (PPM-TH) signal. And the other is the pulse amplitude modulation-direct sequence (PAM-DS) signal. It is assumed that the receiver is an ideal receiver which can receive all signals of the multipath.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.129-138
• /
• 2007

Recently, Direction Finding(DF) System is using switching DF algorithm to reduce system-weight by eliminating RF cable as much as possible. Also, Correlation Vector Direction Finding(CVDF) algorithms is being used for Fast Direction finding in tactical environment. In this paper, I will give you burst error elimination algorithms and compare the performance in case we use switching CVDF algorithm. Although antenna array is not working, we will successfully perform direction finding when we use this burst error elimination algorithms. Also, we will be completely capable of DF mission despite of meeting the unwanted situation that the monitoring signal disappear in case we use Switching Direction Finding algorithms. That situation frequently occurs under the Frequency Hopping signal circumstances.