• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 1994년도 제18회 대기보전학술연구발표회 요지집
• /
• pp.109-112
• /
• 1994

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권3호
• /
• pp.370-374
• /
• 2005

Two experiments were conducted to evaluate the effects of direct-fed microbial supplementation on the growth performance and nutrient digestibility in pigs. In experiment 1, forty eight pigs were used in a 42-d growth assay. There were four pigs per pen and three pens per treatment. Dietary treatments included 1) NC (without antibiotic basal diet), 2) PC (NC diet+0.1% antibiotic, 100 g/kg chlortetracycline), 3) DFM-1 (NC diet+0.2% Lactobacillus reuteri and Lactobacillus salivarius complex) and 4) DFM-2 (NC diet+0.2% Lactobacillus reuteri, Lactobacillus salivarius, Lactobacillus plantarum and Yeast complex). For the overall period, no treatment had significant effects in growth performance. In the nutrition digestibility, the pigs fed DFM diets were improved in DM and N digestibility compared with the pigs fed NC and PC diets but it was not significantly different. In experiment 2, sixty four crossbred pigs were used in a 98-d growth assay. There were four pigs per pen and four pens per treatment. Dietary treatments included 1) HND (high nutrient diet), 2) LND (low nutrient diet), 3) HND+DFM (HND diet+0.2% Lactobacillus reuteri and Lactobacillus plantarum complex) and 4) LND+DFM (LND diet+0.2% Lactobacillus reuteri and Lactobacillus plantarum complex). For overall period of growing phase, the pigs fed LND diets had improved gain/feed (p=0.01) and for overall period in the finishing phase, the pigs fed LND with DFM diets had higher ADG, ADFI and gain/feed than the others but there were no significant differences (p>0.13). In total period of growing-finishing phase, the pigs fed LND diet had higher gain/feed than the pigs fed HND diets (p<0.05). In growing phase, there were not significant differences among the treatments means for DM and N digestibility. However, the pigs fed diets with DFM had improved N digestibility (p<0.02) compared to the pigs fed diets without DFM in finishing phase. In conclusion, DFM slightly improved the growth performance in growing-finishing pigs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.480-480
• /
• 2013

태양에너지는 신재생 에너지 중에서 무한한 에너지원으로서 태양에너지에 대한 활발한 연구가 이루어지고 있다. 그 중에서도 결정형 실리콘 태양전지에 대해 다양한 연구가 진행 중이다. 이러한 실리콘 태양전의 제작은 실리콘 식각 용액을 이용하여 기판의 절삭 손상된 부분을 식각한 후 텍스쳐링(texturing) 공정을 통해 표면의 흡수율을 높이고, 반면에 반사율을 감소시킨다. 텍스쳐링 공정이 끝난 후 도핑 공정을 통해 에미터(emitter)를 형성, 반사방지막을 증착, 기판의 전면과 후면에 페이스트를 바르고 스크린인쇄법으로 전극을 형성한 후 마지막으로 형성된 전극을 소성 공정을 통해 전극이 에미터와 접촉하면 태양전지가 완성된다. 하지만 텍스쳐링 공정을 통해 만들어진 피라미드 구조는 도핑공정을 하게 되면, 꼭짓점 부분의 균일한 도핑이 이루어지지 않는다. 이러한 균일하지 않은 공정으로 인해 전극 소성 공정에서 일부의 에미터층을 뚫어버리게 되므로 누설전류가 증가하게 된다. 그래서 본 논문에서는, 변환 효율을 개선시키기 위해 표면 구조와 반사방지막의 열처리 공정에 대한 연구를 하였다. 우선 피라미드 구조를 균일하게 만들었으며, 반사방지막 형성 후 열처리를 하여 소수 캐리어 수명을 증가시켰으며, 누설전류를 감소하였다. 균일한 도핑 및 전극 형성을 용이하게 하는 부드러운 피라미드 구조를 형성하기 위해 HND (HF：HNO3 : D.I wafer=5 : 100 : 100) 용액을 사용하여 식각하였다. 그 결과 직렬저항은 NHD용액을 사용하여 300초 동안 식각하였을 때 $1.284{\Omega}$ 낮아지는 결과를 얻을 수 있었으며, 도핑을 균일화하여 누설전류를 감소시킬 수 있었다.

• 가정과삶의질연구
• /
• 제21권5호
• /
• pp.109-120
• /
• 2003

The purpose of this study was to evaluate the effectiveness of a group art therapy program on the psychological well-being of children who have experienced domestic violence. The therapy program was designed to enhance self-esteem and reduce anxiety for these children. The participants of this study included seven elementary school students and five junior high school students. The therapy program consisted of thirteen sessions that were held between September 25, 2002 and December 17, 2002. Each session lasted approximately 100 minutes. The effectiveness of this program was evaluated by a pretest and a post-test. The instruments used in the tests were the Anxiety Scale and Self-Esteem Scale. In addition, HND (Here and Now Drawing) was adopted for qualitative evaluation. The data were analyzed by paired t-tests. The results show the following: First, the group art therapy program was effective in enhancing the children's self-esteem and in reducing their anxiety. Second, there was a qualitative change in children's HND (Here and Now Drawing) after the therapy program, which proves that the group art therapy was effective.

• 반도체디스플레이기술학회지
• /
• 제13권2호
• /
• pp.29-35
• /
• 2014

In this study general solar cell production process was complemented, with research on improvement of solar cell efficiency through surface structure and thermal annealing process. Firstly, to form the pyramid structure, the saw damage removal (SDR) processed surface was undergone texturing process with reactive ion etching (RIE). Then, for the formation of smooth pyramid structure to facilitate uniform doping and electrode formation, the surface was etched with HND(HF : HNO3 : D.I. water=5 : 100 : 100) solution. Notably, due to uniform doping the leakage current decreased greatly. Also, for the enhancement and maintenance of minority carrier lifetime, antireflection coating thermal annealing was done. To maintain this increased lifetime, front electrode was formed through Au plating process without high temperature firing process. Through these changes in two processes, the leakage current effect could be decreased and furthermore, the conversion efficiency could be increased. Therefore, compared to the general solar cell with a conversion efficiency of 15.89%, production of high efficiency solar cell with a conversion efficiency of 17.24% was made possible.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권1호
• /
• pp.235-238
• /
• 2016

Hepatitis C is an ailment of liver caused by hepatitis C virus (HCV) infection. About 3% of the world population is infected by this virus. HCV infection is a leading reason for liver cirrhosis and therefore a major source of hepatocellular carcinoma. The study focused on the incidence of active HCV infection in blood donors of Mardan district of KPK, Pakistan. A total of 5318 blood donors were inspected for the presence of anti-HCV antibodies and HCV-RNA using ICT (immune-chromatographic test), ELISA and RT-PCR at Mardan Medical Complex (MMC), Mardan. Out of these, 157 (2.95%) were positive by ICT, 60 (1.12%) by ELISA and 56 (1.05%) for HCV-RNA. The frequency of active HCV infectivity amongst the blood donors from district Mardan, KPK Pakistan was 1.05 %. Application of strict measures during blood donor selection and use of proper screening assays such as ELISA in place of ICT devices can give a more accurate picture so that the incidence of this viral infection in HCV negative blood recipients can be reduced.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.1080-1084
• /
• 1989

The motion of an workpiece to be manipulated is determined by the forces applied to the workpiece. During the contact between the robot hand and the workpiece, impulsive forces may dominate all other forces, and determine the ultimate success or failure of a task. Therefore, one of the important problems in the robot hands is the control of the initial impact force. In this paper, the problem of the force control of robot hand under system with contact force is presented. The principle of energy can be applied in the modelling of the impact force. In order to achieve stable contact and avoid bounces and vibrations, VSS is adopted in the design of the contact force controller. Some simulations are carried out for a pushing operation to control the contact force.

• 콘크리트학회논문집
• /
• 제14권6호
• /
• pp.864-873
• /
• 2002

현재의 CFT기둥 구조에 대한 연구는 대부분 강재측 측면에서 접근한 연구와 강관 내부에 충전되는 콘크리트의 충전성 등과 같은 시공적 측면에 대한 연구성과가 주류로 되고 있으며, 콘크리트 측면에서의 연구는 미흡한 실정이다. 이것에 대한 연구를 중심으로 HCFT 기둥이 축력아래에서 단주가 동일한 휨-모멘트를 받을 때의 변형성능(M-ø)에 대하여 해석적으로 수치적인 값을 검토하였다. 그리고, 기본적인 가정을 바탕으로 실험에서 얻은 CFT 단면의 변형성능의 해석에 대하여 모멘트-축력-곡률관계의 해석 프로그램의 개발(C-Language)을 실시하였다. 따라서, 본 연구에서는 폭-두께비(D/t), 세장비(λ), 콘크리트의 종류를 주요변수로 하여 편심하중 아래에서의 강도 600kgf/$\textrm{cm}^2$를 충전한 HCFT 기둥에 대한 내력 및 곡률과 같은 구조적 특성을 고찰하였으며, AISC-LRFD, AIJ, Tokanori Sato의 식을 이용한 내력설계식의 비교분석을 실시하였다. 본 연구에서 검토한 내력 및 곡률은 향후 HCFT 기둥에 대한 내력설계식의 제안 및 해석에 유용하게 적용될 수 있을 것으로 사료된다.

• 미생물학회지
• /
• 제30권4호
• /
• pp.246-251
• /
• 1992

대두 (Glycine max) 뿌리혹의 질소고정 공생균주 Bradyrhizobium japonicum SNU001 의 nod 유전자를 클로닝하였다. Rhizobium meliloti 의 4.5 kb EcoRI/ HindIII 절편을 탐침으로 한 게놈 혼성화 반응을 분리균주의 게놈상에 nod 유전자가 존재함을 확인하고, lambda EMBL3-BamHI vector 를 이용하여 genomic library 를 작성하였다. 작성된 library 로부터 1, 2 차 선별과정을 통해 nod 유전자가 있는 클론 1-5 를 선별하고, 클론 2로부터 nod DABC 탐침과 lambda DNA 탐침을 사용한 혼성화반응을 수행하여 삽입된 genomic DNA 에 대한 부분적인 제한효소 지도를 작성하였다. nod DABC 탐침과 가장 강한 혼성화반응을 보인 phage 클론 lambda CNS-1 의 3.9 kb BamHI 절편을 pBS KS(+) vector 에 subcloning 하고 동일한 탐침을 이용한 혼성화반응을 통해 subclone pBjCNS-1 을 선별하였다. 이 subclone 에 대한 부분적인 제한효소 지도를 작성하여 nod DABC 가 1.8 KpnI/SacI 절편에 존재함을 확인하였다.

• 대한치과교정학회지
• /
• 제46권5호
• /
• pp.280-289
• /
• 2016

Objective: The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Methods: Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t -test. Results: All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in ($4.5^{\circ}$, p < 0.001; $3.0^{\circ}$, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Conclusions: Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars.