• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.17-24
• /
• 2010

There has been recent interest in intelligent vehicle technologies, such as advanced driver assistance systems (ADASs) or in-vehicle information systems (IVISs) that offer a significant enhancement of safety and convenience to drivers and passengers. However, unsuitable design of HMI (Human Machine Interface) must increase driver distraction and workload, which in turn increase the chance of traffic accidents. Distraction in particular often occurs under a heavy driving workload due to multitasking with various electronic devices like a cell phone or a navigation system while driving. According to the 2005 road traffic accidents in Korea report published by the ROad Traffic Authority (ROTA), more than 60% of the traffic accidents are related to driver error caused by distraction. This paper suggests the structure of vehicle environment for real-time driving behavior monitoring system while driving which is can be used the driver workload management systems (DWMS). On-road experiment results showed the feasibility of the suggested vehicle environment for driving behavior monitoring system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.8
• /
• pp.709-712
• /
• 2015

This paper will introduce the development case study about virtual-reality-based operation training system for steel making process. Steel making process consist iron making process to create liquid steel, pig iron, by reduction process, steel making process to make molten steel by refining, continuous casting process to make slab, and rolling process to make final product like coil, plate. This steel making process deals with liquid and solid products, so facilities of steel making process are very various and complicated. In addition, according to various customer requirements, the recycle of facilities and recipes changing have been fast. So the training for skilled operators is very important point. In this paper, we develop steel making training system based virtual reality for training skilled operator. This system consists of virtual machine, virtual HMI, and virtual control panel. And for fitting the characteristics of each process and increasing the education effectiveness, we develop dynamic methods like the method of dynamic education system configuration, initial facilities setup operation education system, and etc.

• Journal of Sensor Science and Technology
• /
• v.27 no.6
• /
• pp.380-385
• /
• 2018

Recently, interest in baseball has been increasing as the level of international baseball games, the popularity of domestic leagues, and the number of players entering the MLB has increased. In this paper, we propose a pitching system that can be applied to both professional and amateur baseball. The pitching system consists of a control module using MSB764T PLC, a pitching mechanism including AC motors and a ball feed rail, an HMI using the CHA-070WR model, inverter, etc. To pitch the breaking balls, the two AC motors each use an inverter to independently control the speed. The implemented pitching system was experimented on, investigating ball speed and ball movement according to RPM using the BUSHNELL Velocity Speed Gun. Experimental results on ball speed are similar to the theoretical data and the measured data. From the experimental data, it is confirmed that the damping coefficient value for the pitching ball is about 0.98. In the case of the breaking ball, the larger the difference between the speeds on the sides of the ball and the faster the ball speed, the larger the bending degree.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1551-1559
• /
• 2007

Seoul Metro has been constructing the screen doors on the platforms to provide safe and comfort environments. The screen doors of each station are configured so that they can be operated in automatic mode in connection with ATC/ATO through the integrated control panel in the station control room and in manual mode through the control panel of the station control room and crew control panel. These systems have been implemented with different data communication protocols between systems, HMI configuration, and so on due to ordering processes, implementation time and diverse suppliers, and manufactured to be operated within single station. Seoul Metro has been planning to implement the integrated control system to secure seamless train operation and safety and to have a fast response system against emergency situations such as PSD failure and fire, by implementing the system that is able to collectively manage, monitor and control the operation status and equipment conditions of PSD on to the integrated control center. This paper has studied a scheme to reduce the budget for the future facility constructions by standardizing the data format for data communication with the integrated station control panel and using the open standard protocols, in order to secure consistency of operation, system expansion and maintenance with unified and standardized control items.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2325-2327
• /
• 2002

포항 가속기연구소(PAL)에서는 포항방사광가속기(PLS)가 가동을 시작한 1994년 이후 현재까지 사용되어 온 기존의 제어 시스템을 새로운 환경인 EPICS(Experimental Physics and Industrial Control System) 시스템으로 개발하고 있다. EPICS 시스템의 구성은 IOC(Input/Ouput Controller) 와 OPI(Operator Interface)의 2-Layer로 구성되며 이는 MIU(Machine Interfaces Unit), SCC(Subsystem Computer Control System) 그리고 HMI(Human Machine Interface)로 이어지는 기존의 3-Layer 단계 중 SCC단계를 줄여 2-Layer로 구성된다. 이들 두 계층간의 통신은 Client(OPI)/Server(IOC) 구조의 Channel Access를 통해서 이루어진다. 개발중인 EPICS 시스템은 Open Architecture 구조로 IOC와 OPI 각 부분에서 개발시에 사용된 운영체제나 Hardware 를 사용하지 않고 다른 운영체제나 Hardware를 사용하더라도 하나의 공통부분 즉, Channel Access만 있으면 이를 통해 서로 다른 Subsystem IOC의 데이터를 Access할 수 있다. 전체 EPICS 제어시스템 중 저장링 운전의 핵심이 되는 BPM(Beam Position Monitoring) 및 MPS(Magnet Power Supply) 시스템은 IOC부분에 MVME5100(Target Machine) 보드와 vxWorks(Operating System)를 이용하고 OPI부분에는 SUN Workstation(Host Machine)와 Solaris(Operating System)을 사용하여 개발하고 있다. 본 논문에서는 IOC 및 OPI의 설치 절차와 설치 방법에 대해 기술하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1154-1163
• /
• 2008

DAS and SCADA system are main systems, which operate and manage the power system by using computer and communication technology. But DAS and SCADA have been operated independently in Korea, so there was some time delay in the fault handling and live-line work. To improve that problems, studies on the interface between DAS and SCADA have been needed. From November 2005 to December 2007, the pilot project has been performed in KEPCO's branch offices, as a result, direct method will be applied widely all over the country until 2010 because the operation information of substation users want can be transmitted fast and it is possible to control 43RC directly although the expense for direct method is about 1.3 times larger than that for web method. To improve problems revealed during the pilot project, substation object to object communication method is proposed and interface database automatic generation and interface system diagnosis and logging functions are developed. Interface data point and communication data type are defined, substation single line diagram automatic generation or manual editing function, SCADA monitoring and controlling function, log data managing function are developed in SCADA HMI program. It is expecting to reduce the average time for each outage about 33% and to improve the reliability, efficiency of operation, execution of DAS from automatic load transfer under a fault, and to contribute to export project.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.585-591
• /
• 2013

A robot automation system for coating uniformly a big radiator used in PPS(Packaged Power Station), which consists of 6-axis robot with spray gun, travelling vehicle, supply device of coating paint and thinner with pressured air, HMI controller and robot path OLP(Off-Line Programming), was developed. Experimental results on an optimum operation condition show that a coating thickness is $43{\mu}m$, which is satisfied to a design reference of $25-100{\mu}m$. A productivity of the developed coating robot automation system based on OLP is about 12.6 times of that of manual operation.

• IE interfaces
• /
• v.10 no.1
• /
• pp.145-154
• /
• 1997

In developing the HMI(Human-Machine Interface) evaluation system for the IVNS(In-Vehicle Navigation System), design guidelines and evaluation methods are the most crucial problems for its use and efficiency. As the part of this system, focused on the final product of the database, subjective mental workload assessment is seriously considered to evaluate the driver's own driving task using the IVNS. This paper suggests the methodology for the ergonomic assessment of the IVNS that corresponds to the subjective measurement of the driver's mental workload by rating his or her own driving task. For this approach, Revision of NASA-Task Load Index(RNASA-TLX) was developed which translated and revised the version of NASA-TLX that is generally accepted an efficient and powerful method for evaluating the in-vehicle information systems. To verify the RNASA-TLX, an experiment was conducted in a real road situation, because the result of the laboratory approach is uncertain and has the differences from the real road test.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.509-515
• /
• 2022

As the 4th industrial revolution based on ICT is progressing in the manufacturing field, interest in building smart factories that can be flexible and customized according to customer demand is increasing. To this end, it is necessary to maximize the efficiency of factory by performing an automated process in real time through a network communication between engineers and equipment to be able to link the established IT system. It is also necessary to collect and store real-time data from heterogeneous facilities and to analyze and visualize a vast amount of data to utilize necessary information. Therefore, in this study, four types of controllers such as PLC, Arduino, Raspberry Pi, and embedded system, which are generally used to build a smart factory that can connect technologies such as artificial intelligence (AI), Internet of Things (IoT), and big data, are configured. This study was conducted for the development of a program that can collect and store data in real time to visualize and manage information. For communication verification by controller, data communication was implemented and verified with the data log in the program, and 3D monitoring was implemented and verified to check the process status such as planned quantity for each controller, actual quantity, production progress, operation rate, and defect rate.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.136-138
• /
• 2007

최근 들어 전력량계는 기계식에서 반도체 소자를 사용하는 전자식으로 점진적으로 교체되고, 외부 통신 장치와의 데이터 통신 방식에 있어 국제 표준 규격인 IEC 62056을 기반으로 표준화하고 있다. 그리하여 표준화된 데이터 통신 방식으로 수집된 전력 정보를 취합하고 통합하는 운영 시스템 구축이 대두하게 되었고 사용자 중심의 HMI(Human Machine Interface) 관점에서 다양한 고객의 요구와 분석 자료 그리고 방대한 데이터 관리를 제공하기 위한 편리한 운영자 환경을 제공해야 한다. 본 논문에서는 전력량계에서 측정된 전력 정보를 저장하고 운영할 수 있는 시스템 개발에 관하여 연구하였다.