• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.737-740
• /
• 2000

Injection molded plastic parts have many appearance imperfections: weld line sink mark flow mark, gloss, shading, scratching, etc. Because these appearance faults have not accepted esthetically, so pastic parts are produced through painting or texturing. The purpose of this paper is to develop a paintless molded part of TV Mask Front, using numerical simulations and experiments. In order to minimize problems of injection, this study carried out computer aided injection mold filling simulations using MF/FLOW. Based on these numerical results we developed FR(Flame Retardant) HIPS and estabilished guidelines of part design, mold design, and processing conditions. We took effects of cost savings, inprovement of productivity, and utilization of recycling by eliminated painting process.

• Elastomers and Composites
• /
• v.33 no.1
• /
• pp.3-9
• /
• 1998

The production of polyurethane polymer has been increased because of their unique properties and variety process methods available. The generation of their wastes also increases with products. These byproducts of industrialization seriously threaten the environmental demanding. Therefore, development of the recycling technologies have been required. The main propose of this study is to develop the recycling technology of waste polyurethane from a footwear scrap. This technique is composed of the following procedure : crushing, devulcanizing, pelletizing, washing and drying. The pellet was characterized with various methods. The recycled polyurethane(RPU) was blended with HIPS(high impact polystyrene) and investigated morphologically and rheologically. The experimental results showed that the addition of 20% HIPS to RPU was limited without mechanical performance of the superial properties of a virgin polyurethane. We believe that these technical information make possible to develop a rational engineering product.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.1
• /
• pp.52-57
• /
• 1991

To find optimum conditions necessary in converting physical properties of any resin into those of others, eleven kinds of HIPS (High-Impact Polystyrene) resins were prepared. First physical properties of eleven samples divided into three groups are analyzed by a torque rheometer (named Plasti-Corder, Model No.: PLD 651) and GPC (Gel Permeation Chromatography), and then optimum conditions on conversion among samples are obtained by calculation from computer simulation so that any sample subjected to each group can show physical properties of other samples in its group. Even though the kind of plasticizer of any sample is different with others in its group, once optimum conditions on conversion among samples are met, it is found that physical properties of any sample are identical or similar to those of others in each group.

• Journal of the Korean Society of Costume
• /
• v.54 no.1
• /
• pp.69-81
• /
• 2004

The purpose of this study was to find out apparel fit satisfaction according to item(jacket, pants, skirt) by body perception and body satisfaction. This research was done by a survey method. Descriptive Statistics, Pearson's Correlation, Crosstabs were used for data analysis. The results of this study are as follows. 1) Correlation between body perception and body satisfaction : The subjects were less satisfied with larger or thicker girth of upper body. The subjects were less satisfied with thicker upper arm, lower arm, waist and lower abdomen. The subjects were more satisfied with taller height. The subjects were less satisfied with larger or thicker girth of lower body. The subjects were less satisfied with thicker hips. thighs, calves, ankles, and longer crotch length. However, they were more satisfied with longer legs. 2) Apparel fit by body perception and body satisfaction: The subjects who were less satisfied with thicker upper arm, waist, thighs and wider hips were less satisfied with the upper arm area, waist area. hip area of jacket. The subjects who were more satisfied with longer arms were more satisfied with the sleeve length of jacket. The subjects who were less satisfied with wider shoulder width were less satisfied with the upper back width of jacket. It means the shoulder width affected more the upper back width of jacket than shoulder width of jacket. The subjects who were less satisfied with wider hips were less satisfied with the hip area of pants and skirt. The subjects who were less satisfied with thicker thighs were less satisfied with the thigh area and the hip area of pants and skirt. The subjects who were less satisfied with longer crotch length were less satisfied with the crotch length of pants. 3) Difference between actual body and perceived body by Rohrer Index: Rohrer Index 109 calculated by average of the ideal height(165.83cm) and weight(49.78kg) of the subjects ranged in thin body type(below 120). The subjects tended to perceived their bodies fatter than their actual bodies. Also, the subjects tended to perceived their lower bodies fatter than upper bodies.

• The Korean Journal of Community Living Science
• /
• v.19 no.3
• /
• pp.419-429
• /
• 2008

This study was conducted to analyze the characteristics of women's body somatotypes by direct measurements. Through the classification of degree of obesity and silhouette, women in their 20s who have a great interest in body somatotype can grasp their real somatotype and recognize their obesity rate and silhouette easily. The results are as follows: 1. Average sizes of subjects for this study were: height 160.3cm, weight 52.2kg, bust 83.7cm, waist 65.7cm, hips 91.1cm. And average values of each body mass index were: BMI 20.3, Rohrer Index 1.27, Vervaeck Index 84.8. 2. For the BMI value, the Average Numeric Index of normal somatotype was the highest, 76.9%. The Rohrer Index of underweight somatotype was 34.3% and the Average Numeric Index was 1.12. In the Vervaeck Index, underweight somatotype was 35.7%, and the average Numeric Index was 79.1, while the overweight somatotype was 7.4% of the Vervaeck Index and 100.8 of the Average Numeric Index. So the index which had the largest range of normal values from the same subjects, was the BMI, then the Rohrer Index, and finally, the Vervaeck Index in that order. 3. In the result of sorting bodies with silhouettes, when drop value were used to sort, N type (normal somatotype) was 69.4%, H type (one has similar sizes in waist size and hips) was 20.4% and A type (one has big hips) was 10.2% in that order. Among people in their early 20s, A type was 12.1%. H type was high, 22.8%, among women in their late 20s. When Sinozaki's method of classifying body types was used, ideal somatotype was 86.6%, A type was 7.4%, I type was 5.6% and X type was 0.5%. Women in their late 20s showed higher rates of ideal somatotype, the rates of A type and I type were lower than women in their early 20s.

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.435-442
• /
• 2011

Polybrominated diphenyl ethers (PBDEs) are a class of brominated flame retardants (BFRs) which have taken much interest recently due to their potential hazardous effects to human body and ecosystem. Many countries and European community prohibits the usage of certain BFRs in electronics and electronic devices (e.g. RoHS). In this perspectives, Korea Research Institute of Standards and Science (KRISS) has designed and practiced proficiency testing programs based on the ISO/IEC 17043 in order to assist laboratory accreditation activities. The programs for interlaboratory comparisons include congeners of PBDE (PBDE-154, 183, 206, 209) in high impact polystyrene (HIPS). A sample bottle that contains 10 g granular HIPS was distributed to 35 participating laboratories and the test results were calculated by the statistical procedure using z-scores to evaluate performance of each laboratory. The results and the laboratory's performance were discussed.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.744-753
• /
• 2001

One of the most important factors which affect the impact strength of high impact polystyrene (HIPS) is the rubber-phase particle size and size distribution. In this study, HIPS was prepared from a batch reactor to observe the influence of reaction conditions such as rubber content, agitation speed and prepolymerization time on the particle size and size distribution. Measurements concerning the particle size distribution were conducted using a particle size analyzer. Due to swelling, the particle suspended in toluene increases in size with lower heat-treatment temperature and shorter heat-treatment time, while the particle in methyl ethyl ketone shows quite reasonable size without any effort of heat-treatment. As rubber content increases, the average particle size increases substantially, but the increase in agitation speed at lower rubber contents does not have much influence on the size. However, the polystyrene-phase particles occluded in rubber-phase become more uniform as agitation speed increases. Longer prepolymerization time produces rubber-phase particles with narrower particle size distribution.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.307-315
• /
• 2002

Major factors affecting the impact resistance of high impact polystyrene (HIPS), the rubber-toughened grade of polystyrene, are rubber-phase particle size and size distribution, molecular weight, morphology, and degree of grafting. Accordingly, it is important to control or investigate these factors. In this study, the effect of solvent content was analyzed by the morphology and particle size distribution of rubber phase, and final properties in bulk-solution polymerization of HIPS. The prepolymerization time was, first, determined by measuring the evolution of particle size distribution of dispersed phase to explain the phase inversion with time. As the solvent content increased, the size of rubber particle increased and then gradually decreased. Rubber-phase morphology was likely to have higher degree of grafting as the solvent content increased. Rheological and mechanical properties decreased as the solvent content increased because of the decrease of matrix molecular weight due to the chain transfer reaction to solvent and the existence of residual solvent. Nevertheless, the impact resistance seemed to increase when the rubber particle size increased.

• Journal of the Korean Society of Costume
• /
• v.53 no.5
• /
• pp.79-95
• /
• 2003

The purpose of this study is firstly to survey the social and cultural background of 20th century and women´s status, and to identify what the ideal body is like and what the elements of outer garment and underwear are and the techniques to incarnate the ideal beauty. Various papers are referenced for theoretical study and the elements and techniques of underwear are analyzed based on photographical materials. This paper concludes as follows. In 1960´s, ideal beauty was small bust, long legs, which showed extremely slim Mini-skirt look. Thinly or no padded brassiere were worn for small bust, and pants-style short panty girdles were popular as they used to wear pants frequently. Lycra replaced all the closures, bones, seams and gave freedom with light weight. In 1970´s, a natural human body without sex specific was in vogue. Therefore, the non-structural knits without a pad or lining or the shirts dress were widespread for a Natural look and the naturally molded brassiere or girdles were worn as the underwears. In 1980´s, the women with powerful muscle appear which emphasized liveliness and healthfulness. The body conscious represented by wide shoulder, plump breast, accented waist, small hips, and long legs has been embodied. Outer garments emphasized women power and healthy beauty with Power suit and Form-fitting style, and underwears made the breast plump with padded brassiere and emphasized waist and hips with waspie. In 1990´s, ideal beauty was slim body with big bust and the outer garments emphasized body line of women with Hourglass silhouette. Push-up bra which emphasizes the valley of breast and supports the breast upward and the control tights for slim waist, flat abdomen, small hips, and long and slim legs have been useful as underwears. Multi-functional micro-fiber has been ideal for sculpting women body.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.9-19
• /
• 1998

RAID technology that provides the disk I/O system with high performance and high availability is essential for OLTP server. This paper describes the design and implementation of the HIPSS RAID system that has been developed for the SPAX OLTP server. HIPSS has the following design objectives: high performance, high availability, standardization and modularization of external interface, and ease of maintenance. It guarantees high performance by providing 10 independent I/O channels, large data cache, and parity calculation engine. Hardware modularization of the host interface makes it easy to replace host interface hardware module. By providing dual power supply, dual array controller, and disk hot swapping, it provides the system with high availability Implementation of HIPSS and integration test on SPAX has been completed and performance measurement on HIPSS is now going on. In this paper, we provide the detail description for HIPSS system architecture and the implementation results.