• 항공우주기술
• /
• 제3권1호
• /
• pp.9-15
• /
• 2004

본 논문에서는 무인비행선 비행제어시스템의 HILS(Hardware-In-the-Loop-Simulation) 시스템 개발 결과를 소개한다. HILS 시스템은 비행선 제어를 위해 설계된 비행제어컴퓨터의 지상시험을 위해 개발되었다. HILS 시스템을 구성하기 위해 각각 별도의 컴퓨터에서 작동하는 통신장비 모사 시스템, 탑재장치 모사 시스템, 비행선 운동 모사 시스템, 그리고 운동 가시화 시스템을 개발하였고, 이와 함께 3축 운동 시험대와 관성항법장치(Inertial Navigation Unit)도 포함하였다. 개발된 HILS 시스템을 이용한 단계적인 시험을 통해 비행 제어컴퓨터의 기능과 성능을 검증하였다.

• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.687-695
• /
• 2006

This paper presents a network-based traction control system(TCS), where several electric control units(ECUs) are connected by a controller area network(CAN) communication system. The control system consists of four ECUs: the electric throttle controller, the transmission controller, the engine controller and the traction controller. In order to validate the traction control algorithm of the network-based TCS and evaluate its performance, a Hardware-In-the-Loop Simulation(HILS) environment was developed. Herein we propose a new concept of the HILS environment called the network-based HILS(Net-HILS) for the development and validation of network-based control systems which include smart sensors or actuators. In this study, we report that we have designed a network-based TCS, validated its algorithm and evaluated its performance using Net-HILS.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.2883-2890
• /
• 2000

In this study, a Hardware-In-The-Loop-Simulation(HILS) system for developing a Electric-Power-Steering(EPS) system is designed. To test a EPS by HILS system, a mathematical vehicle model with a steering system model has been constructed. This mathematical model has been constructed. This mathematical model has been downloaded to the Digital-Signal-Processor(DSP) board. To realize the lateral force acting on the front wheel in a real car. the steering wheel angle sensor and vehicle velocity have been used for input signal. The force sensor has been used for a feedback signal. The full vehicle states could by simulated by the HILS system. Consequently, the HILS system could by used to analyze control-parameters of a EPS that contributes to the maneuverability and stability of a vehicle. At the same time, the HILS system can evaluate the whole performance of the vehicle-steering system. Also the HILS system could do test could not be executed in real vehicle. The HILs system will useful for developing the control logic for the EPS system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.566-568
• /
• 1999

HILS is widely used in the test and evaluation of complex control system. This paper describes the structure of HILS and the control loop performance monitoring of HILS system Distal path delay and FMS(Flight Motion Simulator) dynamics were estimated and output of the estimated model were compared with real FMS output. The monitoring system can be used for analyzing the result of HILS.

• 제어로봇시스템학회논문지
• /
• 제21권9호
• /
• pp.881-887
• /
• 2015

The hardware-in-the-loop simulation (HILS) of a railway vehicle is crucial for overcoming the limitation of field tests of a railway vehicle. A brake HILS system for a railway vehicle was previously not able to test the performance of a speed-sensing system of a railway vehicle, since wheelset speeds were generated only by computer simulations. In this paper, we present a novel wheelset speed implementation of a brake HILS system for a railway vehicle. Four wheelset speeds of a brake HILS system for a car of a railway vehicle are implemented using four small-sized servomotors, whereas the speed sensors and pole wheels used in the brake HILS system are the actual ones of the railway vehicle. According to the simulated speeds of four wheelsets in the dynamic equations of motion, four servomotors generate wheel speeds in real time, and then the measured wheelset speeds are fed back to the computer simulation model. Moreover, in this paper, we improve the performance of wheelset speed measurement via the T method instead of the M method presently used in the field. The performances of wheelset speed implementation and speed-sensor operation are demonstrated by experimental works using a HILS system.

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.785-792
• /
• 2010

This paper on the Research of Naval Electronic Warfare System HILS(Hardware In the Loop System) describes the EW engagement HILS construction method for evaluation of the operational concept analysis on active RF Decoy in staying in the air and the deceit ability to anti-ship missile seeker. We obtain the EW M&S technology of EW engagement HILS and EW efficiency analysis from this project. This Naval Electronic Warfare System HILS technology will support Active Decoy Development Project and any other HILS of EW weapon in KOREA ARMY/NAVY/AIR FORCE.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.105-111
• /
• 1999

The paper presents development of a Hardware-In-the-Loop simulation (HILS) system for the purpose of testing performance, stability, and reliability of an electronic power steering system(EPS). In order to realistically test an EPS by the proposed HILS apparatus, a simulated uniaxial dynamic rack force is applied physically to the EPS hardware by a pnumatic actuator. An EPS hardware is composed of steering wheel &column, a rack & pinion mechanism, andas motor-driven power steering system. A command signal for a pneumatic rack-force actuator is generated from the vehicle handling lumped parameter dynamic model 9software) that is simulated in real time by using a very fast digital signal processor. The inputs to the real-time vehicle dynamic simulation model are a constant vehicle forward speed and from wheel steering angles driven through a steering system by a driver. The output from a real-time simulation model is an electric signal that is proportional to the uniaxial rack force. The vehicle handling lumped parameter dynamic model is validated by a fully nonlinear constrained multibody vehicle dynamic model. The HILS system simulation results sow that the proposed HILS system may be used to realistically test the performance stability , and reliability of an electronic power steering system is a repeated way.

• 제어로봇시스템학회논문지
• /
• 제8권10호
• /
• pp.898-906
• /
• 2002

Antilock Brake System (ABS) is designed to prevent wheels from being locked-up under emergency braking of a vehicle. Therefore it improves directional stability of the vehicle, shortens stopping distance, and enhances maneuvering during braking, regardless of road conditions. Hardware In-the-Loop Simulation (HILS) is an effective tool for design Performance evaluation and test of vehicle subsystems such as ABS, active suspension, and steering systems. This paper describes a HILS model for ABS/ ASR(Acceleration Slip Regulation) system applications. A fourteen degrees-of-freedom vehicle dynamics model is simulated in an alpha-chip processor board. The proposed HILS system is tested with a basic ABS control algorithm. The design and implementation of HILS system for the ABS ECU(Electronic Control Unit) development of commercial vehicle are presented. The results show that the proposed HILS system can be used to test the performance, stability, and reliability of a vehicle under braking.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.321-327
• /
• 2006

The previous paper described the logic tuning, the vehicle manufacture and the evaluation in the HILS system for the purpose of the development of a Steer-By-Wire(SBW) system. This paper describes the content of applying to a new HILS system, the vehicle manufacture and the result of the evaluation performed in Independent-type SBW(I-SBW) system. Here, the SBW indicates the method of steering both tires by using one motor as the steering gear actuator, similar to the conventional steering system. On the other hand, the I-SBW means the method of steering both front tires independently by using dual motors as the steering gear actuator. As a result, the layout and the kinematical mechanism of the I-SBW system are quite different from those of the typical steering mechanism. Nevertheless, there is no change in the steering column motor system. In the report, we first describe the structure and control logic of the I-SBW system, and then the control effect on this system as applied for both the HILS system and a vehicle. Furthermore, our HILS system involves the actuator mechanism which realizes the reaction force of the road surface with a minimized frictional force in operation. Therefore, it is possible for us to tune the control logic via the HILS system and confirm the effect of the tuned control logic by applying it to a vehicle with the I-SBW system.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.937-946
• /
• 2021

The floating crane is used to lift the heavyweight on the ocean. The floating crane has a winch system for lifting the heavyweight and the system is controlled by the winch control system. The heavyweight is lifted safely by control of the winch control system. Before the make the control system and controller, there are many restricted conditions to test and validate at design and development steps. In order to solve the problems, commonly use the HILS (Hardware-In-the-Loop-Simulation). HILS is the method of test and validation for the hardware control system. It can be composed of the control system in hardware with surrounding environments which is a virtual model. In this study, we developed the winch system model for HILS of the 150t winch control system in a floating crane. Through this simulation and winch model, it can be applied to HILS for the winch control system.