• 드라이브 ㆍ 컨트롤
• /
• 제9권1호
• /
• pp.1-9
• /
• 2012

Nowadays, various researches about eco-friendly vehicles such as hybrid electric vehicle, fuel cell vehicle and electric vehicle have been actively carried out. Since most of these green cars have electric motors, the regenerative energy technology can be used to improve the fuel economy and the energy efficiency of vehicles. The regenerative brake is an energy recovery mechanism which slows a vehicle by converting its kinetic energy into electric energy, which can be either used immediately or stored until needed. This technology plays a significant role in achieving the high energy usage. However, there are some technical problems for controlling the regenerative braking and the electro-hydraulic brake during switching at transient region. In this paper, the performance simulator for fuel-cell vehicle is developed and transient response characteristics of the regenerative braking system are analyzed in the various driving situations. And the hardware-in-the-loop simulation of electro-hydraulic brake is performed to validate the transient characteristics of the regenerative braking system for fuel-cell electric vehicle.

• 항공우주시스템공학회지
• /
• 제13권6호
• /
• pp.36-42
• /
• 2019

본 논문은 유/무인 항공기 복합운용체계 검증을 위한 시뮬레이션 환경 구축 및 통합 시험에 대하여 다룬다. 유/무인 항공기 지상 시뮬레이션 환경 구축을 위해서 유인기용 시뮬레이터인 X-Plane과 무인기용 시뮬레이터 HILS를 연동하여 상호 복합운영이 가능한지 시뮬레이션으로 검증하였다. 실제 비행시험 전 유/무인 항공기 및 지상통제실 간 C Band 및 UHF 채널을 이용한 통신 가능성을 확인하기 위하여 통신장비를 제작하고 유인 항공기를 이용한 검증을 수행하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1972-1977
• /
• 2005

In this work, an inverse dynamic control method is developed to enhance tracking performance of industrial robots, which effectively deal with the nonlinear dynamic interferential forces. In general, the DFF (Dynamic Feed-Forward) controller and the CTM (Computed-Torque Method) controller are used for dynamic control for industrial robots. We study on the practical issues for implementing these inverse dynamic controllers via simulations and experiments. We develop the dynamic models in two different ways. One is a model designed through Newton-Euler method for real time computation and the other is a model designed through SimMechanics for evaluating the developed controller via simulations. We evaluate the nominal performance and robustness of the controller via simulations and experiments using serial 4-DOF HyRoHILS (Hyundai Robot Hardware-In-the-Loop Simulation) system. The results show that the inverse dynamic controller is effective and practically useful for a real control structure.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.54-61
• /
• 2009

Lane keeping assistant system (LKAS) could save thousands of lives each year by maintaining lane position and is regarded as a promising active safety system. The LKAS is expected to reduce the driver workload and to assist the driver during driving. This paper proposes a model based predictive controller for the LKAS which requires cooperative driving between the driver and the assistance system. A Hardware-In-the-Loop-Simulator (HILS) is constructed for its evaluation and includes Carsim, Matlab Simulink and a lane detection algorithm. The single camera is mounted with the HILS to acquire the monitor images and to detect the lane markers. The simulation is conducted to validate the LKAS control performance in various road scenario.

• 전자공학회논문지SC
• /
• 제49권4호
• /
• pp.55-60
• /
• 2012

해상환경에서 감시장비의 운용시 원치 않는 외란 운동으로 장비의 안정화 성능이 저하된다. 본 논문에서는 선상 2축 감시장비의 정밀한 목표물 지향를 위해 자세정보의 좌표변환을 통해 움직임을 보상해주는 기구적 안정화를 적용하였다. 적용 결과, MEMS 센서의 떨어지는 정밀도와 기구적인 제약에 의해 오차를 더 줄일 없어 보완적인 기능으로 영상 안정화를 도입하였다. 또한 본 이중 안정화 방식의 실시간 실행을 위해 6축 운동 시뮬레이터를 포함한 테스트 베드를 구축하였으며, 하드웨어 포함 시뮬레이션 수행을 통해 본 방식의 유용성을 검증하였다.

• International Journal of Automotive Technology
• /
• 제6권6호
• /
• pp.599-604
• /
• 2005

A functional suspension model is proposed as a kinematic describing function of the suspension, that represents the relative wheel displacement in polynomial form in terms of the vertical displacement of the wheel center and steering rack displacement. The relative velocity and acceleration of the wheel is represented in terms of first and second derivatives of the kinematic describing function. The system equations of motion for the full vehicle dynamic model are systematically derived by using velocity transformation method of multi-body dynamics. The comparison of test and simulation results demonstrates the validity of the proposed functional suspension modeling method. The model is computationally very efficient to achieve real-time simulation on TMS 320C6711 150 MHz DSP board of HILS (hardware-in-the-loop simulation) system for ECU (electronic control unit) evaluation of semi-active suspension.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.222-228
• /
• 2003

Lane departure avoidance system is one of the key technologies for the future active-safety passenger cars. The lane departure avoidance system is composed of two subsystems; lane sensing algorithm and active-steering controller. In this paper, the road image is obtained by vision sensor and the lane parameters are estimated using image processing and Kalman Filter technique. The active-steering controller is designed to prevent the lane departure. The developed active-steering controller can be realized by steer-by-wire actuator. The lane-sensing algorithm and active-steering controller are implemented into the steering HILS(Hardware-In-the-Loop Simulation) and their performance is evaluated with a human driver in the loop.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.723-729
• /
• 2001

Electro-hydraulic shift control of a vehicle automatic transmission has been predominantly carried out via an open-loop control based on numerous time-consuming calibrations. Despite remarkable success in practice, the variations of system characteristics inevitably deteriorate the performance of the tuned open-loop controller. As a result, the controller parameters need to be continuously updated in order to maintain satisfactory shift quality. This paper presents a self-learning algorithm for automatic transmission shift control in a construction vehicle during inertia phase. First, an observer reconstructs the turbine acceleration signal (impossible to measure in a construction vehicle) from the readily accessible turbine speed measurement. Then, a control algorithm based on a quadratic function of the turbine acceleration is shown to guarantee the asymptotic convergence (within a specified target bound) of the error between the actual and the desired turbine accelerations. A Lyapunov argument plays a crucial role in deriving adaptive laws for control parameters. The simulation and hardware-in-the-loop simulation (HILS) studies show that the proposed algorithm actually delivers the promise of satisfactory performance despite the system characteristics variations and uncertainties.

• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.83-91
• /
• 2012

In recent days, the study on hybridization of the heavy-duty is going on, actively. Especially, the improvement of fuel economy can be maximized in the intra-city bus because it drives the fixed route. For developing the hybrid electric intra-city bus, optimized control strategy which is possible to be applied with real vehicle is necessary. If the real-time control strategy is developed based on the HILS, it is possible to verify the real-time ability and fail-safety function which has the vehicle stay in safe state when the functional errors are occurred. In this study, the HILS system of series hybrid electric intra-city bus is developed to verify the real time control strategy and the fail-safety functions. The main objective of the paper is to build the HILS system for verifying the control strategy (rule-based control) which is implemented to reflect the Dynamic Programming results and fail-safety functions.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.385-391
• /
• 2020

배전계통에서의 과전류 및 이상 전압 현상은 전력설비에 부담을 줄 뿐만 아니라 수용가에 치명적인 피해를 입힐 수 있다. 그로 인해 실시간 배전계통 시뮬레이터를 활용하여 신속한 고장처리와 정전구간 축소 및 고장복구를 통한 전력공급의 신뢰도를 높이는 배전자동화 관련 연구가 활발히 진행되고 있다. 기존의 디지털 시뮬레이터를 이용한 배전계통 모의시스템은 고가의 설비로 시스템 구축에 제약이 있고 실 배전계통을 통한 검증 또한 불가능하다. 본 논문에서는 배전계통 디지털 시뮬레이터의 계통해석결과를 기반으로 배전자동화용 단말장치와의 연동을 통해 실시간 시뮬레이션 및 기능검증이 가능한 시스템을 개발하였다. 제안한 시스템의 효용성은 실험을 통해 검증하였다.