• Journal of Microbiology and Biotechnology
• /
• v.13 no.5
• /
• pp.794-799
• /
• 2003

Enzyme-linked immunosorbent assay (ELISA) was developed for the rapid detection of Fusarium species, known as harmful fungi in food. One of the hybridoma cell lines (lB8) which produced a monoclonal antibody (Mab) specific to Fusarium extracellular polysaccharide (EPS) was screened and the Mab was produced and purified. A detection limit of the sandwich ELISA against F. moniliforme EPS was $0.001\;\mu\textrm{g}/ml$ in the standard curve. Among the 59 strains tested, most Fusarium species showed hight reactivity with Mab lB8, even when the culture broths were diluted 100,000 times. On the other hand, the other genera, except A. versicolor and Trichoderma viride, had no reactivity. When 1 to $100\;\mu\textrm{g}$ of F. moniliforme EPS was spiked into rice, potato, and mandarine orange, the average recoveries were 151%, 84%, and 94%, respectively, determined by sandwich ELISA. The correlation coefficients between the EPS levels determined by sandwich ELISA and the dry mycelial weight of the liquid culture of F. moniliforme, as well as between the EPS and colony forming unit in solid culture of potato, were 0.97 and 0.91, respectively.

• Journal of Nutrition and Health
• /
• v.30 no.3
• /
• pp.277-285
• /
• 1997

The purpose of this study was to investigate the relationship among nutrient intake, life style, and serum lipids level in 108 healthy middle-aged men in Taegu. A convenient method was to assess nutritional intake. Anthropometric measuement of body weight and hight were measured and average energy expenditure was calculated. The mean body mass index(BMI) was 22.8$\pm$2.4 and it was in the middle of the mean BMI of Korean men. Obesity rate of study subject were 13.2%. Daily energy intake was not sufficient as 88.4% of recommended dietary allowances and the energy percentage of carboydrate, fat protein was 65 : 21 : 14. Mean intake of vitamin A, B1, C and Ca were lower than RDA. There was a highly significant negative correlation between the systolic blood pressure and calcium intake(r=-0.28, p<0.05). Smokers showed significantly higher blood glucose than non-smokers. Skipping meals and uneven diurnal distribution(no breakfast and large evening meals) are associated with high triglyceride level in this population. There was a highly significant correlation between body weight and plasma lipids. Energy expenditure was negatively correlated with plasma triglyceride level. Especially, atherogenic index was significantly lower in job-time physically active worker than that in sedentary worker. Above data provides valuable imformation to the community for program planning as well as to health providers who work individual male adults to meet their nutrition needs and to control blood lipids.

• Journal of Welding and Joining
• /
• v.27 no.2
• /
• pp.76-81
• /
• 2009

Tandem GMAW is one of the high performance welding process and used in many industries to increase the productivity. An evaluation is presented of the mechanical properties and microstructural characteristics of the Tandem GMAW and conventional Single GMAW welds in 30mm thickness 490MPa grade steel by comparison method. Welding sequence and bead with and hight was kept, avoiding the effect of the bead shape and welding sequence. Tension, bending, hardness and Charpy impact test results of Tandem GMAW met the requirement of specification and showed similar distribution with conventional Single GMAW. Volume fraction of ferrite phase in weld metal showed little difference between Tandem GMAW and Single GMAW

• Journal of Environmental Science International
• /
• v.24 no.9
• /
• pp.1199-1210
• /
• 2015

There were 35 typhoons affecting Korean Peninsula from 1999 to 2009(The average annual number of typhoon is 3.18). Among these typhoons, the number of typhoon passing through the Yellow sea, the Southern sea and the East sea were 14, 6 and 15 respectively. Wind speed on the height of 10 m can be finally estimated using the surface roughness after we calculate wind speed on the height of 300 m from the data on the surface of 700 hPa. From the wind speeds on the height of 10 m, we can understand the regional distributions of strong wind speed are very different according to the typhoon tracks. Wind speed range showing the highest frequency is 10~20 m/s(45.69%), below 10 m/s(30.72%) and 20~30 m/s(17.31%) in high order. From the analysis of the wind speed on the hight of 80 m, we can know the number of occurrence of wind speed between 50 and 60 m/s that can affect wind power generation are 104(0.57%) and those of between 60 and 70 m/s that can be considered as extreme wind speed are even 8(0.04%).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.130-133
• /
• 2006

Owing to Higher story tendency and ceiling hight restriction of recent times, even though the depth of Coupling Beam decreases the demand efficiency is coming to be high rather so it is the difficult to satisfy a demand efficiency with the actual existing RC/Steel condition. It has been researched a lot of methods as an alternative plan about these but designer cannot apply them for the reason ; the structure standard and theory background are not taking a triangular position. As accomplishing the test research about the beams-wall connections department of steel-plate composite coupling beams from the research in the study it examines closely the beams-wall connections conduct quality and tries to provide the fundamental data for reasonable and optimum connection department designs. It knows that connection fixation degree and composite conduct degree of member part together become the important variable showing an energy dissipation ability in Test result.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.129-131
• /
• 2011

An 6.4-Gb/s/channel 4-PAM transceiver is designed for a high speed memory application. The asymmetric 4-PAM signaling scheme is proposed to increase the voltage and time margins, and reduces the reference noise effect in a receiver by 33%. To reduce ISI in a channel, 1-tap pre-emphasis of a transmitter is used. The proposed asymmetric 4-PAM transceiver was implemented by using 0.13um 1-poly 6-metal CMOS process with 1.2V supply. The active area and power consumption of 1-charmel transceiver including a PLL are $0.294um^2$ and 6mW, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.635-640
• /
• 2005

In this paper, we have improved a novel high tilted optically compensated bend (OCB) (HTOCB) mode by using high tilt angle that was generated by the unique baking condition on the homeotropic alignment layer. The high tilt angle of liquid crystal (LC) was generated by new alignment process that tilt angle changed homeotropic state to homeogenous state using Hot-plate equipment; we obtained about $40\~50^{\circ}$ tilt angle with negative and positive dielectric anisotropy on the homeotropic polyimide (PI), and then LC tilt angle decreased as increasing baking temperature and time. At last, we obtained about $10^{\circ}$ with positive type NLC $({\Delta}n>0)$. Also, the LC tilt angle of positive type NLC $({\Delta}n>0)$ decreased as increasing rubbing strength at the same baking temperature and time. The novel LC operating mode (HTOCB) that used the high tilt angle by the new alignment method was improved. The response time of the novel HTOCB cell was faster than that of conventional OCB cell. We suggest that the developed the novel HTOCB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of a fast response time and a high contrast ratio.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.1
• /
• pp.71-87
• /
• 2007

Main role to expand the fashion in the middle age was played by aristocracy and knight. They contributed to the fashion of the middle age regardless of aesthetic sense. First, in any age, there was a self-display design using splendid decoration or material in the costume of high-class people. Aristocracy, especially, knight in the middle age classified themselves from others by wearing the costume suitable for their statuses. Second, the Crusade knight appearing all over the cinema gathered various peoples and caused acute optic angle about specialty of costume. Therefore the trend preferring foreign costumes was changed to new fashion while it was connected to desire searching for a change. Third, although armor of knight was created because of protection in the war, in the 13th century, its character of motion and defense was emphasized and it became splendid style. More over, the costume of knight was developed to more emphasize masculine beauty with heavy upper body and light lower body so it caused sexual difference of costume in the middle age. Fourth, As knight searched effective defensive weapon, chain mail was relegated by plate armor. The order of armor that the hight wore in 1350 was as follows. First, he wears adhesive shirts, braies, hose and wears metal protector on arm and leg. He wears padded undercoat called gambeson, hauberk, plate armor and surcoat on them.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.122-129
• /
• 2012

This study investigates structural and vibration analyses according to the thickness of bicycle frame tube. The model of bicycle frame has the dimension as length of 862mm, width of 100mm and hight of 402.5mm. There are 3 kinds of models with tubes of top, down and seat at bicycle frame as thicknesses of 10, 15 and 20mm. The maximum displacement and stress occur at the center part of seat stay and at the installation part of rear wheel respectively. Maximum displacements become 0.031936, 0.029159 and 0.027984mm in cases of thicknesses of 10, 15 and 20mm respectively. In case of thickness of 20mm among 3 cases, maximum displacement becomes lowest. But maximum stresses become 10.019, 8.5492 and 9.2511MPa in cases of thicknesses of 10, 15 and 20mm respectively. In case of thickness of 15mm among 3 cases, maximum stress becomes lowest. There is no resonance at practical driving conditions and natural frequency remains almost unchanged along the change of thickness. In case of the displacement due to vibration mode, the displacement difference at thickness between 15mm and 20mm becomes 1/2 times than that between 10mm and 15mm. Design at bicycle frame tube becomes most economical and durable effectively in case of thickness of 15mm among 3 cases.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.6
• /
• pp.341-346
• /
• 2001

To investigate the effects of MS medium strength and nitrogen concentration on bulblet formation from bulblet scale segment culture and bulblet growth from bulblet of Lilium oriental hybrid 'Casa Blanca', asiatic hybrid 'Mona', and longiflorum hybrid 'Hinomoto', 0.5∼2.0 strength of MS salts and 30∼120 mM nitrogen concentrations of MS medium were examined in vitro. The number of bulblets from bulb scale segment was favored in the strength of 0.5∼1.0 strength of MS salts or 30 mM total nitrogen concentration of MS medium in three cultivars. But the growth of bulblets formed in vitro was promoted in the 2 strength of MS medium or hight concentration of total nitrogen of MS medium up to 120 mM in three experimented cultivars.