• Ocean and Polar Research
• /
• v.42 no.1
• /
• pp.49-61
• /
• 2020

We analyzed the morphological characteristics of OCC (Ocean Core Complexes) in the middle part of the Central Indian Ridge (MCIR) using high-resolution geophysical data recorded on the Deep-Tow SideScan Sonar IMI-30 system. In terms of slope-gradient variations calculated from the high-resolution bathymetry data, the normal faults formed by seafloor spreading were associated generally with slopes > 30° and resulted in high backscatter intensities, which reflect more topographic effects than acoustic medium variation. However, the areas associated with gentle slopes < 10° tend to show the backscatter intensities reflecting the acoustic characteristic of the medium. We show that the detachment faults exposing the OCCs were initiated with high-angle normal faults (58°) exhibiting outward and inward dips of a breakaway zone. In order to examine the spatial distribution of OCC structures, we characterized the transition from magmatic-dominant seafloor with abyssal hills to tectonic-dominant seafloor with OCC using the down-slope direction variation. The slope direction of the seafloor generally tends to be perpendicular to the ridge azimuth in the magmatic-dominant zone, whereas it becomes parallel to the given ridge azimuth near the OCC structures. Therefore, this spatial change of seafloor slope directions indicates that the formation of OCC structures is causally associated with the tectonic-dominant spreading rather than magmatic extension. These results also suggest that the topographical characteristics of seafloor spreading and OCC structures can be distinguished using high-resolution geophysical data. Thus, we propose that the high-resolution bathymetry and backscatter intensity data can help select potential areas of exploitation of hydrothermal deposits in MCIR effectively.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.348-348
• /
• 2017

This experiment was conducted to investigate the aspect of tiller occurrence, growth and yield of sorghum according to planting density and sowing date. The subject of this experiment is to supply basic data to inhibit non-productive tillers uneconomical and cumbersome for mechanical harvesting. Also another subject was to evaluate optimum planting density and sowing date in central district area. Total number of tillers was more in 80cm ridge than 60cm ridge and it was increased as the planting distance was wider from 15cm to 30cm on the each ridge. Ratio of effective tillers was higher in 60cm ridge than 80cm ridge and it was decreased as planting distance was wider from 15cm to 30cm. The lower the planting density, the more increased total number of tillers, whereas effective tillers were decreased as planting density was high. Average of total number of tillers of three varieties was higher in sowing date of 2 May (1st sowing date), whereas ratio of effective tillers was the highest in sowing date of 23 May (2nd sowing date). Hwanggeumchal showed the highest total number of tillers (1.2 tillers), while Moktaksusu had the lowest total number of tillers (0.8 tillers) among three varieties. There were no significant difference between planting density and days to heading and ripening date from seeding. Culm length increased as planting density was high, but ear length, grains per ear and 1000 grain weight were decreased on the other hand. The highest yield of sorghum per 10a was obtained from $60{\times}20cm$ planting density among 6 planting densities.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.503-510
• /
• 2004

We propose a novel vertical directional coupler switch using a vertical directional coupler with polarization independent coupling lengths employing the doublesided deep-ridge waveguide structure. This switch is composed of a switching operation induced section with symmetric structures and an extinction ratio enhanced section with asymmetric structures. We present design methods and examples for this switch with very short lengths and very high extinction ratios larger than 30 dB for both TE and TM modes in cases of both cross and bar states.

• Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.210-218
• /
• 2018

Background: Soil respiration (Rs) is a major factor of the absorption and accumulation of carbon through photosynthesis in the ecosystem carbon cycle. This directly affects the amount of net ecosystem productivity, which affects the stability and sustainability of the ecosystem. Understanding the characteristics of Rs is indispensable to scientifically understand the carbon cycle of ecosystems. It is very important to study Rs characteristics through analysis of environmental factors closely related to Rs. Rs is affected by various environmental factors, such as temperature, precipitation, soil moisture, litter supply, organic matter content, dominant plant species, and soil disturbance. This study was conducted to analyze the effects of micro-topographical differences on Rs in forest vegetation by measuring the Rs on the ridge and southern slope sites of the broadly established Quercus mongolica forest in the central Korean area. Method: Rs, Ts, and soil moisture data were collected at the southern slope and ridge of the Q. mongolica forest in the Mt. Jeombong area in order to investigate the effects of topographical differences on Rs. Rs was collected by the closed chamber method, and data collection was performed from May 2011 to October 2013, except Winter seasons from November to April or May. For collecting the raw data of Rs in the field, acrylic collars were placed at the ridge and southern slope of the forest. The accumulated surface litter and the soil organic matter content (SOMC) were measured to a 5 cm depth. Based on these data, the Rs characteristics of the slope and ridge were analyzed. Results: Rs showed a distinct seasonal variation pattern in both the ridge and southern slope sites. In addition, Rs showed a distinct seasonal variation with high and low Ts changes. The average Rs measurements for the two sites, except for the Winter periods that were not measured, were $550.1\;mg\;CO_2m^{-2}h^{-1}$ at the ridge site and $289.4\;mg\;CO_2m^{-2}h^{-1}$ at the southern slope, a difference of 52.6%. There was no significant difference in the Rs difference between slopes except for the first half of 2013, and both sites showed a tendency to increase exponentially as Ts increased. In addition, although the correlation is low, the difference in Rs between sites tended to increase as Ts increased. SMC showed a large fluctuation at the southern slope site relative to the ridge site, as while it was very low in 2013, it was high in 2011 and 2012. The accumulated litter of the soil surface and the SOMC at the depth range of 0~5 cm were $874g\;m^{-2}$ and 23.3% at the ridge site, and $396g\;m^{-2}$ and 19.9% at the southern slope site. Conclusions: In this study, Rs was measured for the ridge and southern slope sites, which have two different results where the surface litter layer is disturbed by strong winds. The southern slope site shows that the litter layer formed in autumn due to strong winds almost disappeared, and while in the ridge site, it became thick due to the transfer of litter from the southern slope site. The mean Rs was about two times higher in the ridge site compared to that in the southern slope site. The Rs difference seems to be due to the difference in the amount of litter accumulated on the soil surface. As a result, the litter layer supplied to the soil surface is disturbed due to the micro-topographical difference, as the slope and the change of the community structure due to the plant season cause heterogeneity of the litter layer development, which in turn affects SMC and Rs. Therefore, it is necessary to introduce and understand these micro-topographical features and mechanisms when quantifying and analyzing the Rs of an ecosystem.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.4
• /
• pp.19-27
• /
• 2012

The objective of this study was to test the pollutant reduction effect by the silt fence and vegetated ridge through field monitoring. The experiment plots were established with two replication and three treatments. Each plot was designed with 5 m width, 22 m length, and 3 % slope. Flumes with the floating type stage gages were installed at the outlet of each plot to monitor the runoff. For a rainfall monitoring, tipping bucket rain gage was installed within the experiment site. Cultivated crops were spring daikon and autumn chinese cabbage. Analysis of variance (ANOVA) indicated that the water quality concentration from three experiment plots were not significantly different in 5 % of significant level. The monitoring results showed that the average pollution loads reduced by silt fence compared to control were SS 75.33 %, TN 40.87 %, TP 56.58 %, BOD 52.12 %, COD 36.07 %, TOC 34.99 %; by vegetated ridge compard to control were SS 65.27 %, TN 81.80 %, TP 54.26 %, BOD 67.09 %, COD 46.55 %, TOC 43.30 %. Analysis of Spearman's rank correlation coefficient showed that BOD-SS and SS-Turbidity were highly related at the silt fence and vegetated ridge plots. In all plots, SS-Turbidity and TP-TN relations were relatively high. The monitoring results showed that the silt fence and vegetated ridge were effect method to reduce the pollutant loads from the field runoff. Long-term monitoring is required to obtain more quantitative reduction effect for diverse crops and to increase the reliability of results.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.4
• /
• pp.71-80
• /
• 2007

The purpose of this study is to suggest the criteria for the damaged mountainous landscape based on the shape, location and ratio of damaged landscape. For the study, the preference and landscape adjectives were analyzed on visual images and simulations. The variables for analysis were the amount of the damaged ratio(10%, 30%, 50%), the location of the damage (upper, middle, lower) and the various forms of the damage(spot, line, area). According to the results of this study, in accordance with the amount of damage, the visual preference recorded its lowest with the a rate of 50%. As for the location of the damage, the lower-ridge of the mountain showed the highest preference, and the upper-ridge was recorded as the lowest. The linear damage type showed the highest preference. On the other hand, the spotted damage type showed lowest. The results indicate that the visual preference increases when there is a lower ratio of damage, as the damage locates at the lower-ridge, and also when there is a presence of linear formation development. The group of linear formation-the lower ridge-10% showed the highest preference, and the group of linear formation-the mid ridge-50% was the lowest with the results of 3-way ANOVA. The group of linear formation-lower ridge-10% in particular had virtually no differences of visual preference when it was compared with the original scene. The damage with the spotted formation, on the mid-upper location and the high ratio of damage were analyzed as factors that give negative influence on the mountainous landscape. The main features of mountainous landscape were reduced into two factors, 'total estimation' and 'spatial scale' by the factor analysis with total variance of 65.96%.

• Horticultural Science & Technology
• /
• v.18 no.5
• /
• pp.599-604
• /
• 2000

This experimemt was conducted to determine the effect of ridge-up bed with different height (0, 20, 40, 60 cm) on the fruit quality of 'Miyagawa Wase' satsuma mandarin cultivated in a plastic film house. Soil moisture was measured at the soil depths of 10, 30, and 60 cm for each height of ridge-up bed. The time required to reach the condition, -1.4 Mpa at 30 cm deep in soils, which are supposed to be the ideal soil moisture potential and soil depth for high quality satsuma mandarin production, was 100, 60, and 30 days for 20, 40, and 60 cm ridge-up bed, respectively, and more than 100 days for 0 cm. Peel chromaticity by 'a' value was increased as the ridge-up height went up, so that plants grown at the bed with 60 cm height had 11 degree higher value than those of plants grown at the bed with 0 cm height. The 'a/b' values also had a similiar trend as value 'a'. The reducing sugar level of the fruit juice, which was composed of glucose and fructose, was increased as the height of ridge went up, showing significant difference between the ridge heights. The sucrose level had the same trend as the reducing sugar level although the difference between the ridge heights were not significant. Generally, the soluble solid level is considered to be representing the fruit quality. It had 11.4, 12.1, 12.5, $12.8^{\circ}Brix$ for 0, 20, 40, and 60 cm ridge-ups, respectively, showing $1.4^{\circ}Brix$ difference between 0 and 60 cm ridges. Acidity basically showed the same result as that of the soluble solid level depending on the height of the ridges.

• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.277-281
• /
• 2010

We propose a design and optimization method for a dielectric-loaded surface plasmon polariton waveguide using a genetic algorithm. This structure consists of a polymer ridge on top of two layers of substrate and gold film. The thickness, width and refractive index of the ridge are designed to optimize the figures of merit including mode confinement and propagation length. The modal analysis combined with the effective index method shows that the designed waveguide exhibits a fundamental propagation mode with high mode confinement while ensuring that the propagation loss remains relatively low.

• Journal of Korea Water Resources Association
• /
• v.31 no.1
• /
• pp.59-69
• /
• 1998

A regression model with basin physiographic characteristics as independent variables was calibrated for regional flood frequency analysis. In case that high correlations existing among the independent variables the ridge regression has been known to have capability of overcoming the problems of multicollinearity. To optimize the ridge regression model the cost function including regularization parameter must be minimized. In this research the genetic algorithm was applied on this optimization problem. The genetic algorithm is a stochastic search method that mimic the metaphor of natural biological heredity. Using this method the regression model could have optimized and stable weights of variables.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.11 no.2
• /
• pp.49-57
• /
• 2007

In fingerprints, singular regions including core or delta points have different directional characteristics from non-singular regions. Generally, the ridges of singular regions change more abruptly than those of nonsingular areas, thus in order to effectively enhance fingerprint images regardless of region, local ridge curvature information needs to be used. In this paper, we present an improved Directional Filter Bank (DFB)-based fingerprint image enhancement method that effectively takes advantage of such ridge curvature information. The proposed method first decomposes a fingerprint image into 8 directional subbands using the DFB and then classifies the image into background, low curvature, and high curvature regions using the directional energy estimates calculated from the subbands. Thereafter, the weight values for directional subband processing are determined using classification information and directional energy estimates. Finally, the enhanced image is obtained by synthesizing the processed subbands. The experimental results show that the proposed approach is effective in enhancing both singular and non-singular regions.