• Journal of the Korean Professional Engineers Association
• /
• v.42 no.5
• /
• pp.41-45
• /
• 2009

The last century of lighting has been dominated by incandescent, fluorescent and high-intensity discharge(HID)light sources. In the late 1970's, after green LEDs were invented, Dr. Ching Tang at Eastman Kodak discovered that sending an electrical impulse through carbon compound caused such material glow. Present day LED commercial packages have reached 100 lm/W, comparable to the efficacies of fluorescent and certain HID lamps. LED products available today are market as "Green-Industry" but actually low light output compared to typical light sources. The combination of high price and low light output make them a poor replacement for current technology. It is very important to compare new LED products to the most efficient conventional technology that could be used for any specific application. As LED technology advances, costs decrease, and efficiency improves, LEDs will build market share in the general illumination market.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.411-414
• /
• 1999

This paper presents design and analysis of an HID lamp ballast for a fast turn on characteristics and stable operation. It produces a high open circuit voltage for the ignition and it is controlled to supply effectively the power required to shorten the warm-up period after the breakdown. The lamp modeling by empirical data is presented. It is very effective in the designing of the control loop in the steady-state operating region. A stable operation of the lamp power regulation in the steady state is achieved, which is crucial for the long life time and constant light output. Stability analysis of the system is performed and the results are verified through various simulation results and the hardware experiments.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.114-118
• /
• 1999

This paper shows a structure for an electronic ballast of HID lamps. An electronic ballast for HID lamps usually employs a high-frequency resonant inverter and voltage-to-frequency converter to control the output. A half-bridge and series resonant circuit are chosen for the ballast. The inverter with V/F converter is modeled with a transfer function and a self-feedback controller is proposed. This structure is analyzed and the feedback gain is determined by using the inverter model. Experimental system is built with a commercial 250W high pressure sodium lamp and the results show a validity of the proposed ballast.

• The Optical Journal
• /
• s.145
• /
• pp.31-35
• /
• 2013

최근 자동차에 사용되는 조명은 LED가 주를 이루고 있다. 자동차 실내조명, 계기판 등에 사용되는 내부 조명의 경우 대부분 LED를 적용한 제품이며, 헤드램프, 후방 램프 및 방향 지시등과 같은 외부 조명의 경우도 LED로 교체되고 있다. 특히 LED 기반 헤드램프의 경우 과거 3500cc 이상 승용차 등에 한정되었으나 현재는 그 이하 레벨의 승용차 및 SUV 차량으로 범위가 빠르게 확산되고 있다. 고효율, 긴 수명 및 빠른 응답 속도가 장점인 LED를 차량용 조명 광원으로 사용함으로써 기존 할로겐램프나 HID 광원의 대체재로서의 전환이 활발히 이루어지고 있다. 할로겐램프의 경우 청색보다 적색 파장의 광량이 많은 관계로 황색에 가까운 백색을 보이며, HID 램프의 경우 할로겐램프보다는 백색 계열에 더 가깝다. 하지만 LED 램프는 파장의 순도가 높아 보다 완벽한 백색 구현이 가능하다. 또한 단순한 기능을 지닌 헤드램프에서 지능형 헤드램프로의 발전이 빠르게 이루어지고 있다. 이에 따른 LED의 수요 또한 증가할 것으로 예상된다. 향후 고효율 LED 소자의 개발과 함께 자동차용 LED 조명에 대한 적용은 급속도로 진행될 것으로 예상되며, 앞으로 자동차 조명 분야에서는 'LED 헤드램프/후미등 기술+IT 기술(센서+통신)'이 융합된 형태로 발전할 것이다. 본고에서는 LED 자동차 융합 기술 동향 및 전망에 대해 자세히 기술하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.2
• /
• pp.17-23
• /
• 2016

NUI is a motion interface. It uses the body of the user without the use of HID device such as a mouse and keyboard to control the device. In this paper, we use a Pi Camera and sensors connected to it with small embedded board Raspberry Pi. We are using the OpenCV algorithms optimized for image recognition and computer vision compared with traditional HID equipment and to implement a more human-friendly and intuitive interface NUI devices. comparison operation detects motion, it proposed a more advanced motion sensors and recognition systems fused connected to the Raspberry Pi.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.133-136
• /
• 2016

NUI는 마우스, 키보드 등의 HID장치를 사용하지 않고 사용자의 신체를 사용하여 장치를 제어하는 모션 인터페이스이다. 본 논문에서는 소형 임베디드보드 라즈베리파이와 라즈베리파이에 연결된 파이카메라를 통해 영상인식과 컴퓨터 비전을 위하여 최적화된 알고리즘을 제공하는 OpenCV를 이용하여 손의 제스처를 인식하여 기존 HID장비와 비교하여 더욱 인간 친화적이며 직관적인 NUI장치 인터페이스를 구현하고자 한다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.160-162
• /
• 2004

The aim of this study is to make the technical standards for certificating a high efficiency metal-halide lamps and reflectors using the high intensity discharge lamps, to accomplish the practical energy saving effect. Metal-halide lamps are certificated by stabilzed and restarting time, lamp voltage, current, power and light output efficiency. The high illumination reflectors using HID lamps are certificated by testing reflective index, fading, the melting point, glare and install spacing factor.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.9-17
• /
• 2002

A high-efficiency electronic ballast for HID lamps is presented. The ballast consists of a PFC and a resonant inverter. To reduce losses of the ballast, DC link voltage should be determined by taking into account the peak voltage of lamp and the maximum flux density should be kept 0.2[T] on all of inductors. AR inductor at bridge diode is employed in order to remove currant harmonics from PFC. An inductor is connected in series with an electrolytic capacitor at DC link to reject high-frequency current. The acoustic resonance is eliminated using the stead spectrum technique. The electronic ballast for 250[W] metal-halide discharge lamp is implemented and 96[%] efficiency, no acoustic resonance and low conducted EMI level are accomplished.

• The korean journal of orthodontics
• /
• v.33 no.6 s.101
• /
• pp.475-483
• /
• 2003

The purpose of this study is to evaluate hard and soft tissue changes following the subapical osteotomy in bimaxillary dentoalveolar protrusion patients requiring maximal retraction adult female patients was selected. Surgical procedures were performed by the same surgeon, anterior subapical osteotomy techniques were employed on the maxilla and cephalometric radiograms were traced and superimposed using the best-fit method and two reference The results were as follows 1. The bodily movement of the maxillary anterior segment was achieved in a posterior moved posteriorly with a slight correction of the lower incisors. 2. The horizontal soft tissue measurements changed significantly after treatment, but Nt and Sn vertical soft tissue measurements indicated that Ls moved inferiorly and Li superiorly. 3. The correlation between hard and soft tissue changes indicated that ${\Delta}HId/{\Delta}HLi,\;{\Delta}HId/{\Delta}LL-Eline,\;{\Delta}Hpt.B/{\Delta}HILS,\;and\;{\Delta}UI-FH/{\Delta}NL$ were significant. 4. More lower lip relative to upper lip retraction was demonstrated in relation to Rickett's E-line. The ratio between upper lip displacement was $50\%$, and between the lower incisor and lower lip displacement was $60\%$. We conclude from the results that the anterior subapical osteotomy is an efficient treatment severe dentoalveolar protrusion and desire rapid results.

• Electric Engineers Magazine
• /
• v.253 no.9
• /
• pp.27-33
• /
• 2003

기체분자는 보통상태에서는 전기적으로 중성이다. 그러나 기체 분자가 운동에너지를 가지고 있는 다른 원자나 전자 등과 충돌하게 되면 기체 분자내의 전자가 에너지를 흡수하여 여기나 전리하게 된다. 여기나 전리의 상태는 불안정한 상태이므로 순간적으로 안정상태로 복귀하는데 이 때의 에너지차가 빛으로 방출된다. 이와 같이 온도방사와는 달리 냉광으로 발광하는 현상을 루우미네슨스라고 한다