• 대한간호학회지
• /
• 제34권6호
• /
• pp.1117-1128
• /
• 2004

Purpose: This study was carried out to substantiate the application process of activity-based costing on the current cost of hospital home care (HHC) service. The study materials were documents, 120 client charts, health insurance demand bills, salary of 215 HHC nurses, operating expense, 6 HHC agencies, and 31 HHC nurses. Method: The research was carried out by analyzing the HHC activities and then collecting labor and operating expenses. For resource drivers, HHC activity performance time and workload were studied. For activity drivers, the number of HHC activity performances and the activity number of visits were studied. Result: The HHC activities were classified into 70 activities. In resource, the labor cost was 245￦per minute, operating cost was 9,570￦ per visit and traffic expense was an average of 12,750￦. In resource drivers, education and training had the longest time of 67 minutes. Average length of performance for activities was 13.7 minutes. The workload was applied as a relative value. The average cost of HHC was 62,741￦ and the cost ranged from 55,560￦ to 74,016￦. Conclusion: The fixed base rate for a visit in the current HHC medical fee should be increased. Exclusion from the current fee structure or flexible operation of traveling expenses should be reviewed.

• 한국항공우주학회지
• /
• 제41권6호
• /
• pp.440-447
• /
• 2013

본 연구에서는 능동적인 블레이드 제어기법인 고조파제어(Higher Harmonic Control, HHC) 기법을 적용하여 로터의 허브 진동하중을 억제하기 위한 최적 제어입력을 탐색하였다. 통합 공탄성 해석 프로그램인 CAMRAD II를 이용하여 HART II 로터를 모델링하고 다양한 HHC 입력 조건에 대하여 파라미터 연구를 수행하여 최대의 진동하중을 감소시키기 위한 제어입력을 찾고, HART II 시험에서 정한 최소 진동 조건에서의 허브 진동하중과 비교하였다. 파라미터 연구를 통하여 HART II 시험에서의 최소 진동 조건에서는 진동하중이 증가하는 것을 확인하였다. 허브 진동하중을 감소시키기 위한 최적의 제어입력은 3/rev의 가진주파수에서 찾을 수 있었고 0.8도의 진폭과 350도의 위상각을 갖는 제어입력을 이용하는 경우에 기준조건대비 약 45%의 허브 진동하중 감소효과를 얻었다. HHC 기법을 이용하는 경우의 로터의 파워 감소는 5% 미만으로 나타나고, 성능이 향상되는 경우에는 대부분 진동이 증가하는 경향을 보였다.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.18-25
• /
• 2003

A haptic hand controller (HHC) operated by the user’s hand can receive information on position and orientation of the hand and display force and moment generated in the virtual environment to the hand. In this paper, a 3-DOF hand controller is first presented, in which all the actuators are mounted on the fixed base by combining a 5-bar linkage and a gimbal mechanism. The 6-DOF HHC is then designed by connecting these two 3-DOF devices through a handle which consists of a screw and nut. Analysis using performance index is carried out to determine the dimensions of the device. The HHC control system consists of the high-level controller for kinematic and static analysis and the low-level controller for position sensing and motor control. The HHC used as a user interface to control the mobile robot in the virtual environment is given as a simple application.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.313-318
• /
• 2001

A haptic hand controller operated by the user's hand can receive information on position and orientation of the hand and display force and moment generated in the virtual environment to the hand. This paper presents a design method for KU-HHC, 6 DOF Korea University-haptic hand controller, which allows separation of workspace from linkage mechanism in consideration of the efficient user operation. First, the 3 DOF mechanism in which all the actuators are mounted on the fixed base is developed by combining a 5-bar linkage and gimbal mechanism. Then, the 6 DOF HHC is designed by connecting the two 3 DOF devices through a handle. This paper presents the forward and inverse kinematics for this device and Jacobian analysis. Improvement of the kinematic characteristics using performance index is also discussed. The hand controller KU-HHC based on this design concept and kinematic analysis was manufactured and shows excellent performance.

• 간호행정학회지
• /
• 제14권2호
• /
• pp.118-130
• /
• 2008

Purpose: The purpose of this study was to estimate of home-visiting nursing costs for low-income elderly with chronic disease in a metropolitan city using the severity classification and ABC(active-based costing). Methods: First, the HHC activity pool was established. The performance time of each nursing activity were estimated. Second, nursing resources(labor costs, operating costs, and traffic expenses) were analyzed and nursing cost per minute was calculated. And then the cost of each activity was estimated. Third, 202 visiting cases were classified into three group by their severity. And then nursing cost per visit according to their severity was estimated. Results: 59 nursing activities were included in HHC activity pool. The average working time of 59 nursing activity was 6.7minutes and nursing cost per minute was 489 won. According severity, nursing cost per visit were in class I, 54,296 (won), class II 83,124(won), and class III 93,455(won).

• 한국항공우주학회지
• /
• 제33권3호
• /
• pp.39-46
• /
• 2005

본 논문에서는 광범위한 함수 근사성질을 갖고 있는 신경회로망을 이용하여, 시스템의 입출력 조화성분의 선형관계를 표현하기 위해 추정된 전달행렬의 적용범위를 확장할 수 있는 적응 고차조화제어(Higher Harmonic Control, HHC) 기법을 제안하고 있다. 신경회로망의 학습신호는 추정된 전달행렬을 기반으로 계산된 최적제어 이득 값 행렬을 이용하여 구성된다. 내부 안정성을 보장하기 위하여 신경회로망의 가중치 학습방법은 Lyapunov 직접 방법을 이용하여 유도하였다. 6개의 입력과 2개의 출력을 갖는 비선형 시스템에 대한 시뮬레이션 결과를 통해 적응 고차조화제어 기법이 불확실한 전달행렬에 적용 가능함을 보였다.

• 한국항공우주학회지
• /
• 제41권11호
• /
• pp.855-864
• /
• 2013

능동 탭은 BVI 소음 저감을 위한 능동제어 기술 중 하나이며, 이를 이용한 소음 저감효과에 대한 해석은 기술 개발에 있어서 매우 중요한 과정의 하나이다. 능동 탭의 소음저감 성능 분석을 위하여 모델 로터시스템에 대한 구조 설계를 수행하고 CFD 해석을 통해 에어포일 공력 데이터를 생성하였으며, 이를 이용하여 통합해석 프로그램인 CAMRAD II 모델을 구성하였다. 하강 비행 상태에서 능동 탭을 HHC 방법으로 작동할 경우 로터에서 발생되는 공력 하중을 CAMRAD II를 이용하여 계산하고, 이에 따른 BVI 소음 변화를 자체 소음해석 프로그램으로 계산하였다. 능동 탭의 작동 길이 및 제어 위상의 변화에 따른 소음해석 결과 최대 -3.3dB의 BVI 소음 저감 효과를 얻을 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.236-241
• /
• 2011

An active trailing-edge flap blade named as Seoul National University Flap (SNUF) blade is designed for reducing helicopter vibratory loads and the relevant aeroacoustic noise. Unlike the conventional rotor control, which is restricted to 1/rev frequency, an active control device like the present trailing-edge flap is capable of actuating each individual blade at higher harmonic frequencies i.e., higher harmonic control (HHC) of rotor. The proposed blade is a small scale blade and rotates at higher RPM. The flap actuation components are located inside the blade and additional structures are included for reinforcement. Initially, the blade cross-section design is determined. The aerodynamic loads are predicted using a comprehensive rotorcraft analysis code. The structural integrity of the active blade is verified using a stress-strain recovery analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.324-329
• /
• 2010

Vibrations caused by automobile engine are absorbed mostly by a passive-type engine mount. However, user specifications for automobile vibrations require more stringent conditions and higher standard. Hence, active-type engine mount have been developed to cope with such specifications. The active-type engine mount consists of sensor, actuator and controller where a control algorithm is implemented. The performance of the active engine mount depends on the control algorithm if the sensor and actuator satisfies the specification. The control algorithm should be able to suppress persistent vibrations caused by the engine which are related to engine revolution. In this study, three control algorithms are considered for suppressing persistent vibrations, which are the positive position feedback control algorithm, the strain-rate feedback control algorithm, and the modified higher harmonic control algorithm. Experimental results show that all the control algorithms considered in this study are effective in suppressing resonant vibrations but the modified higher harmonic controller is the most effective controller for non-resonant vibrations.

• 한국소음진동공학회논문집
• /
• 제20권12호
• /
• pp.1176-1182
• /
• 2010

Vibrations caused by automobile engine are absorbed mostly by a passive-type engine mount. However, user specifications for automobile vibrations require more stringent conditions and higher standard. Hence, active-type engine mount have been developed to cope with such specifications. The active-type engine mount consists of sensor, actuator and controller where a control algorithm is implemented. The performance of the active engine mount depends on the control algorithm if the sensor and actuator satisfies the specification. The control algorithm should be able to suppress persistent vibrations caused by the engine which are related to engine revolution. In this study, three control algorithms are considered for suppressing persistent vibrations, which are the positive position feedback control algorithm, the strain-rate feedback control algorithm, and the modified higher harmonic control algorithm. Experimental results show that all the control algorithms considered in this study are effective in suppressing resonant vibrations but the modified higher harmonic controller is the most effective controller for non-resonant vibrations.