• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.331-335
• /
• 2007

방송과 초고속인터넷 서비스를 동시에 제공할 수 있는 HFC(Hybrid Fiber Coaxial) 망은 상/하향이 비대칭 구조이며, 하향속도에 비해 상향속도가 1/10 수준이어서 상향 트래픽이 과다하게 생성될 경우 인터넷속도 지연이 발생한다. 지연에 민감한 VoIP 서비스의 품질보장 방안으로는, DOCSIS(Data Over Cable System Interface Specification) 1.1 기반의 상향 스케쥴링 기능을 이 용한 VoCM(Voice Over Cable Modem)이 있다. 그러나 별도의 VoCM을 사용해야 하며 아날로그 전화기를 사용해 IP 기반의 VoIP 단말을 사용할 수 없다는 단점이 있다. 일반 CM(Cable Modem)에 DOCSIS 1.1 Config File을 이용하여 VoIP 품질을 보장할 경우 별도의 트래픽 대역을 항상 점유해야 하는 단점이 있다. 이에, 본 논문에서는 효율적 대역폭 이용과 단말장비에 종속적이지 않은 방안을 제안하고 일반 CM을 통한 유무선 환경하에서 Dynamic QoS(Quality Of Service)를 제공할 수 있는 PCMM(Packet Cable MultiMedia) 적용 방안 및 시험결과에 대해 고찰하고자 한다.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.834-845
• /
• 2011

Massive broadcasting contents such as UHD(Ultra High Definition) TV which requires multi-channel capacity for transmission has been introduced in recent years. A transmission scheme with channel bonding has been considered for transmission of massive broadcasting contents. In HFC(Hybrid Fiber Coaxial) networks, DOCSIS 3.0(Data Over Cable Service Interface Specification 3.0) has already applied channel bonding schemes for up/downstream of data service. A method unlike DOCSIS 3.0 is required to introduce a channel bonding scheme in the broadcasting service having unidirectional transmission with a downstream. Since a massive broadcasting content requires several channels for transmission, VBR(Variable Bit Rate) transmission has been emerging for the bandwidth efficiency. In addition, research on channel allocation and resource scheduling is required to guarantee QoS(Quality of Service) for the broadcasting service based on VBR. In this paper, we propose a transmission method for mass broadcasting service in HFC network and show the UHD transmission simulator developed to evaluate the performance. In order to evaluate the performance, we define various scenarios. Using the simulator, we assess the possibility of channel bonding and VBR transmission for UHD broadcasting system to provide mass broadcasting service efficiently. The developed simulator is expected to contribute to the efficient transmission system development of mass broadcasting service.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.3
• /
• pp.47-61
• /
• 2012

parallel transmitting system with channel bonding method have been proposed to transmit mass content such as UHD(Ultra High Definition) in HFC(Hybrid Fiber Coaxial) networks. However, this system may lead to channel resource problem because the system needs many channels to transmit mass content. In this paper, we analyze three effective bandwidth approximation algorithms to use the bonding channel efficiently. These algorithms are the effective bandwidth of Gaussian approximation method algorithm proposed by Guerin, the effective bandwidth based on statistics of video frames proposed by Lee and the effective bandwidth based on Gaussian traffic proposed by Nagarajan. We also evaluate compatibility of algorithms to the mass broadcasting service. OPNET simulator is used to evaluate the performance of the algorithms. For accuracy of simulation, we make mass source from real HD broadcasting stream.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.456-463
• /
• 2000

Bidirectional cable TV networks using HFC(Hybrid Fiber Coaxial) networks need MAC (Medium access control) protocols to have efficient access in upstream channels. In this paper, we have studied and evaluated several contention resolution algorithms and mapping of higher layer traffic described in IEEE 802.14 and MCNS (Multimedial Cable Network System) MAC protocols with respect to IP, ABR and CBR traffic types. IEEE 802.14 MAC protocol demonstrates better performance for transmitting ATM cells while the MCNS MAC protocols for the IP traffic.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.167-170
• /
• 2005

We performed field test and analyzed results of field test in variable HFC(Hybrid Fiber Coaxial) network environments. And we investigated whether the test results is satisfied in DOCSIS(Data-over-Cable Service Interface Specification) 2.0 and OpenCable standard. Also, we propose HFC improvement problem for HFC Network quality as BcN(Broadband convergence Network) access network. We tested three sample areas. The sample areas represent various type of SO(System Operator) in korea. The field test was to measure signal level about digital channels. In results of multiple digital channels, in case of "Equalizer ON", we could be obtained very good test results. The results of field test were shown in satisfying recommended values in DOCSIS 2.0 and OpenCable. So, we could have confidence through field test that BcN will be possible to be adapted to environment of korea HFC network.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.564-566
• /
• 2000

To provide more noiseless upstream service on the HFC(Hybrid-Fiber Coaxial) Access Network, we should conduct upstream band analysis and have related operation skill. In this paper, we studied the upstream signal measurement to get goof transmission quality, effective operation and maintenance, also showed the method of noise analysis and that of upstream band frequency selection. Finally we tested the signal in the field and showed the analyzed result.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.505-508
• /
• 2000

We discuss simulation results concerning the performance of the TCP protocol when running over high-speed HFC networks. Hybrid Fiber Coaxial are likely to provide fast and cost effective sup-port to a variety of applications including Video on demand, interactive computer games, and internet-type applications such as Webbrowsing, ftp, and telephony. Since most of these applications, use TCP as the transport later protocol, the key to their success largely depends on the effectiveness of the TCP protocol. In all simulation scenarios the TCP traffic is maxed with some background traffic whose level is taken as a variable parameter. Both the background traffic and TCP traffic are either unshaped, or shaped according to the GCRA algorithm. The effect of the background traffic on the TCP protocol performance is discussed varying the buffering capacity with nodes as well as the peak bit rate that each TCP connection is allowed to use.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.320-321
• /
• 2011

본 논문은 디지털 케이블전송망인 HFC(Hybrid Fiber and Coaxial)망 기반하에서 6MHz 다수의 방송채널결합 기술을 이용하여, 대용량 3D 및 8K-UHD 콘텐츠 전송을 위한 방송망 채널결합형 200Mbps 급 1024-QAM 송수신시스템 개발에 대하여 기술한다. H.264 비디오 부호화기를 사용하여 8K-UHDTV 및 3D/UHD 융합형 서비스를 시청자에게 제공하기 위해서는 약 120~160Mbps 의 대용량 데이터 전송률이 확보되어야 한다. 이와같이 대용량 3D/8K-UHDTV 콘텐츠를 전송하기 위해서는 상대적으로 채널환경이 우수한 HFC 디지털 케이블망을 이용한 대용량 실감미디어 콘텐츠 전송기법에 대한 연구가 주목 받고 있다. 본 논문에서는 FPGA 를 이용하여 HFC 망 기반에서 기존 OpenCalbe/DOCSIS 3.0 256-QAM 대비 약 30% 전송효율이 개선된 3D/8K-UHDTV 대용량 실감미디어 콘텐츠 전송을 위한 방송망 채널결합형 1024-QAM 송수신기 구현 및 개발에 관한 내용을 기술한다.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.117-120
• /
• 2003

PON (Passive Optical Network) is an emerging local subscriber access architecture that provides more bandwidth and services to subscriber than DSL (Digital Subscriber Line and HFC (Hybrid-Fiber Coaxial) network. A PON is a point-to-multipoint optical network with no active elements in the signals' path from source to destination. Advantages of using PON for a subscriber access network include large coverage area, reduced fiber deployment, multicast and broadcast capabilities, reduced cost of maintenance (due to devices being passive), and ease of upgrades to higher bit rate or additional wavelengths. PON uses WDM (Wavelength Division Multiplexing) technique that transmits the downstream and upstream data at each different wavelength. For transmitting the CATV (Community Antenna television) service through PON network, we give out additional wavelength. This study shows the available TPS (Triple play service) architecture using CATV overlay EPON (Ethernet PON) architecture and analyzes the effects of EPON-based CATV transmission by measuring the power loss fur each wavelength and the power range of the available analog wavelength and RF.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.292-299
• /
• 2013

In this paper, we developed a data transmission system over coaxial cable based on the IEEE 802.15.3 MAC and Ultra-Wideband(UWB) Physical Layer. This system is capable of operation in both wireless and wired medias. When operating on coax cable it is capable of Gigabit bi-directional data rate operation on in-home coax wiring and over Hybrid-Fiber-Coax(HFC) cable infrastructure. The developed system transceives command, control and data over a 75 ohm coax system in a home or office. This system operates at a center frequency of 4GHz with a total occupied bandwidth of 1.33Ghz centered on 4GHz. The system uses BPSK modulation and sends symbols at a maximum power level of +15dBm. It has been tested and works through up to three CATV RF splitters in a home environment.