• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2086-2088
• /
• 1999

765kv Transmission lines of the contaminated areas need many insulators due to the contamination. So the length of the arcing hem is very long. Because it is very difficult to install the arcing hem on insulator string sets due to its length, we must install the arcing horn on the jumping devices, and studied about the jumper horn. This paper described the investigation and analysis of the installation status of the arcing horn, and the design of the jumper horn for 765 kV transmission lines.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1119-1120
• /
• 2006

High Energy Milling (HEM) is applied for the grinding of cement and this can lead to substantial refinement $(<2{\mu}m)$ and mechanically activation of the powder particles. The present paper reviews the preliminary studies, explains the novel technique and suggests the route into commercial application. Particular attention is paid to wear results with an applied $Si_3N_4-grinding$ unit where no substantial wear was found after 4000 h of operation.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.118-119
• /
• 2006

The development of Fe-based metal matrix composites (MMCs) with high content of hard phase has been approached by combining the use of advanced powder metallurgy techniques like high-energy milling (HEM), cold isostatic pressing (CIP) and vacuum sinterings. A 30% vol. of NbC particles was mixed with Fe powder by HEM in a planetary mill during 10h, characteristing the powder by the observation of morphology and microstructure by scanning electron microscopy (SEM). After of sintering process the variation of density, hardness,carbon content and the microstructural changes observed, permits to find the optimal conditions of processing. Afterwards, a heat treatment study was performed to study the hardenability of the composite.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.123-125
• /
• 2018

본 논문은 블록체인 알고리즘을 탑재한 HEMS 시스템을 활용하여 전력의 생산과 소비를 동시에 수행하는 에너지 프로슈머들 간의 안전하고 신뢰성 있는 전력거래 시스템을 구현하기 위한 방안을 연구하였다. 신재생발전원의 가정내 보급이 증대하고 HEMS를 통해 댁내 에너지관리가 보다 스마트해지고 전력정보의 실시간 취득이 가능해짐에 따라 동일 변대주 인근 배전선로와 연결된 에너지 프로슈머들간의 소규모 전력거래에 있어 블록체인 기반 기술 적용이 보다 용이해 질 것으로 예상된다. 또한, HEMS를 활용하여 블록체인 기반 P2P간의 전력거래에 있어 기술적 한계를 극복하기 위한 추가적인 연구 방향을 함께 제시하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.20-27
• /
• 2017

The aim of this paper is to present the modulus of elasticity of $E_L$, $E_R$, $E_T$ along three principal axis of softwood dimension lumber by nondestructive method. Ultrasonic measurement was carried out on defect free wood samples taken by the Japanese Larch, SPF (spruce-pine-fir) and Hem-fir $2{\times}4s$. The ultrasound velocities were measured to calculate young's moduli and it was derived elastic constants for each wood samples using the ultrasound velocities and densities of wood. From the test, $E_L$ was much greater than $E_R$ and $E_T$. $E_R/E_T$ ratios were about 1.3. The high density wood had high young's moduli in three principal axis and the difference in young's moduli between species was greater in transverse direction than longitudinal direction. The anisotropy of the lumber was presented through the calculated elastic moduli and compliances matrix in diagonal term were determined by inverting the stiffness matrix.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.569-571
• /
• 2007

In this paper, hem antenna composed of rectangular hern, circular polarizer and straight-type mode convertor is designed and fabricated. The circular polarizer is designed as a dielectric type having broadband characteristic, and it is inserted into the rectangular hem with $45^{\circ}$ inclination. The straight-type mode convertor has a terrace-type structure in order to convert the TEM mode signal of coaxial cable to the TE mode of rectangular waveguide, and this structure minimizes conversion loss. Fabricated hem antenna operates at $30.085\sim30.885GHz$ and has VSWR < 1.5, Axial ratio < 1.0dB and antenna gain of $6.7\sim7.0dBi$ in the band.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.4
• /
• pp.101-112
• /
• 2013

The purpose of this study was to evaluate the differences of the visual image on the variations in the waist position and the width of the wide pants. The stimuli were 9 samples: 3 variations of the waist position and 3 variations of the width of hem line. The data was obtained from 56 fashion students and analyzed by using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of this study are as follows; 1. The visual evaluation by the waist position and the width of the wide pants is composed of 4 factors: attractiveness, physical characteristics, modesty, and personality. Among these factors, the attractiveness was the most important. 2. The high waist pants showed the most characteristic and soft under the condition that the width of the hem line was 98cm at the third stage, while the natural waist pants showed no characteristics and stiff in case the width of the hem line was 66cm at the first stage. 3. The first stage pants were simplest and modest in case the waist position was low, while the third stage pants were the most complicated and untidiest in case the waist position was natural. 4. The waist position and the width of the wide pants interacted with the physical characteristics and the modesty. 5. According to the MCA on the attractiveness and the personality, the width affected to the visual image of the wide pants than the waist position did.

• Fashion & Textile Research Journal
• /
• v.8 no.6
• /
• pp.679-686
• /
• 2006

The purposes of this study are to look into the formative characteristics of the bolero and to evaluate the visual effects and images according to changes in the line and length of the connecting lines of the neck, center front, and hem lines from analyzing the bolero style shown in 2005 S/S domestic fashion. Theoretical examination of the bolero was made philologically with reference books, theses and some articles. And the bolero style shown in 2005 S/S domestic fashion was analyzed with pictures from a fashion magazine "Ceci" and a fashion website 'Interfashion Planning" from Feb. to Aug. of 2005. As a result, the basic lines of the bolero are classified into three different categories according to the connecting lines of the neck, center front line, and hem line. We altered the length of the bolero in three categories with the changes in the waistline-5 cm, 8 cm, and 11 cm. For the visual evaluation, 9 stimuli were placed in mannequins, and were estimated by the experts in the fashion design. For the visual evaluation according to changes in the line and length of the bolero, we used 12 pairs of items to find the visual effects, and 13 pairs of adjectives to measure the visual images. The stimuli and adjectives were randomly given to the evaluators and were evaluated by the 7-Point Likert Type Scale. Data we got from this experiment was analyzed statistically by using the SPSS 12.0 and practiced the Factor Analysis and Correlation Analysis. In the current women's garments, the bolero is a new fashion item which combines with jackets or cardigans. Usually the bolero jacket is made out of a cotton, denim, leather or fur, and the bolero cardigan usually used knitted materials. The design could be very varied depending on the roundness of the center front line, and hem line. According to the result of factor analysis of the visual effects of the Bolero, four factors were identified the whole silhouette, neck line, breasts and shoulders. According to the result of factor analysis of the visual image of the Bolero, three factors were identified maturity, tenderness, neatness.

• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.685-694
• /
• 2016

This study investigates the problems of fitness and motion suitability for Korean male military winter jackets (inner and outer) and provides data for new pattern development. We analyzed fitness and motion suitability by a questionnaire survey with 140 Korean male soldiers and a wearing evaluation with 7 subjects of central army male size. A survey of male soldiers indicated that the fitness and motion suitability satisfaction was over 3.0 (Likert scale) for both inner and outer jackets. There were opinions that the sleeve length was short for the inner jacket and the waist girth and hem girth was slightly large for the outer jacket. In the wearing evaluation results with subjects of central army male size, fitness of total length, sleeve length and collar height showed a score lower than 3.0 for the inner jacket and collar height on the outer jacket. The motion suitability result showed a low score (1.0-2.0) in an arm raising motion for the inner jacket and 2.0-3.0 at neck motion in the outer jacket. In conclusion, there is more dissatisfaction in inner jackets than outer jackets. For the inner jacket, sleeve is short, sleeve hem is narrow, collar height is a little high and the sleeve creeps up during arm motion. The waist girth and hem girth was slightly large and collar height was a little high for the outer jacket.

• The Research Journal of the Costume Culture
• /
• v.28 no.3
• /
• pp.299-312
• /
• 2020

The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10-1+0.5-0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10-1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5-1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5-1(+2)), cap height (AH/3-5), and biceps width (Front AH-1, Back AH-1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.