• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.39-39
• /
• 2011

하천에서 수공구조물을 설계시 구조물의 규모, 형식, 운영방식, 안정성 등을 검토하기 위하여 일반적으로 수리모형실험과 수치모형실험을 이용한다. 수리모형실험은 자연현상의 왜곡을 최소화하여 검토결과를 얻을 수 있다는 장점이 있지만, 많은 시간과 비용, 인력 및 공간이 필요하기 때문에 단기간에 다양한 검토가 필요한 경우에는 많은 제약이 따른다. 반면에 수치모형실험은 제한적인 조건에서 검토목적 및 용도에 따라 다양한 수치모의기법을 활용하여 상대적으로 낮은 비용과 신속하고 다양한 검토가 가능하다는 장점을 가지고 있다. 그러나 수치모형실험은 어디까지나 자연현상에 대한 수학적, 물리적 기법을 활용한 분석이기 때문에 결과에 대한 신뢰성 확보가 매우 중요하다. 최근에는 컴퓨터의 계산능력 향상과 유체의 복잡한 동수역학적 거동 해석 기법의 다양화, 그리고 많은 적용성 검토 연구결과로 인한 신뢰성 향상 등으로 인해 수치모형실험에 대한 관심이 높아지고 있다. 본 연구는 현재 금강에 건설 중인 금강보에 대하여 다차원 수치모형인 EFDC(Environmental Fluid Dynamics Code)를 이용하여 하천 구조물 및 물리적 환경변화에 대한 정밀수리분석을 실시하기 위한 사전절차로, EFDC 모형을 하천수리해석에 적용할 경우 모형에 포함되어 있는 다양한 변수설정 및 제약조건들에 대하여 적용한계를 검토하고자 한다. 검토방법은 금강보가 건설되기 이전의 하천지형 상황에서 EFDC 모형과 HEC-RAS 모형을 이용한 수리분석을 수행하고, 수리거동 결과 들을 상호 비교 분석 한다. 수치모의 대상구간은 금강보 건설구간을 포함하여 약 20km 구간이고, 대상구간에 대하여 3차원 정밀지형자료를 구축하였으며, 과거 호우사상에 대한 구간 내 관측 수위 및 모형별 계산수위결과를 비교 검토하였다.

• Journal of Korea Water Resources Association
• /
• v.43 no.2
• /
• pp.233-243
• /
• 2010

A method is proposed of estimating Muskingum-Cunge parameters for natural streams using cross-sectional and longitudinal channel geometry and roughness coefficient data. Firstly, for various water-surface levels at a cross section cross-sectional areas and hydraulic radii are calculated. Corresponding discharges are then calculated using Manning's equation. This procedure is repeated for all cross-sections in the reach. Finally, routing parameters are estimated from the calculated cross-sectional area and discharge value pairs by regression analysis. The procedures for estimating Muskingum-Cunge parameters are applied to the South Han River. Flows calculated by Muskingum-Cunge model with estimated parameters showed much better agreement with those by dynamic wave model in peak discharge, time to peak discharge, and normalized RMS errors than those calculated by the HEC-1 Muskingum-Cunge model.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.5
• /
• pp.3-15
• /
• 2008

This study aims to simulate the 3 dimensional (3D) model of Keum-man connection canal using geographic information system (GIS) as well as considering design in viewpoint of engineering. The canal connects from Keumkang to Mangyungkang in order to supply fresh water into Saemankeum lake. This study used 3 dimensional spatial planning model (3DSPLAM) process to generate the 3D model, which has not only several planning layers in actual process, but also their corresponding layers in modeling process to simulate 3D space of rural villages. The discharge of the canal is $20m^3/s$ on slope of 1/28,400 in the canal length of 14.2km, which consists of pipe line and open channel. This study surveyed the route of the canal and its surrounding environment for facilities to make images in the 3D graphic model. Besides, the present study developed data set in GIS for geogrphical surface modeling as well as parameters in hydraulic analysis for water surface profile on the canal using HEC-RAS model. From the data set constructed, this study performed analysis of water surface profile with HEC-RAS, generation of digital elevation model (DEM) and 3D objects, design of the canal section and route on DEM in AutoCAD, and 3D canal model and its surrounding 3D space in 3DMAX with virtual reality. The study result showed that the process making 3D canal model tried in this study is very useful to generate computer graphic model with the designed canal on the surface of DEM. The generated 3D canal can be used to assist decision support for the canal policy.

• Journal of Wetlands Research
• /
• v.9 no.3
• /
• pp.25-34
• /
• 2007

We analyzed flood runoff and flood characteristics of an small urban river basin which is in an apartment complex in Yewol-Dong, Buchun-Si, Gyunggi-Do. This discharge normally flows a little by intercepting sewer and interception of pollutants. However in flood period it looks like risk of flood damage by high flood discharge and increase of flood elevation. After appling the analysis model on urban runoff, using the GIS data and cross section at the basin, and then we studied the degree of flood control safety at the basin through forecasting flood elevation. Eventually, there are the flood risks from the River structure for Multi-functional Urban river as well as the river safety. As flood runoff analysis in urban, we need to consider risks which are drainage depth and other.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.267-275
• /
• 2007

Nowadays, it grows bigger the importance of water resource management, and so, hydrographic surveying technology in river is important because it serves basic data about river environment. And, also, the application field of GPS has been increased and expected to be more increased because of the change of the geodetic reference system to World Geodetic System. In this study, hydrographic surveying in Hwang river in Geochang is accomplished by RTK GPS and Total Station and they are compared and analyzed the both results. The section profile in river is made by Hec-Ras program and CAD. The results show it can be saved 15.3% in surveying times and the amount of surveying works can be enlarged 42.5%. And the standard error between RTK results with calibration and the results without calibration turned out as 2.1 cm. So we have a conclusion that RTK GPS is more efficient surveying method than total station in hydrographic surveying in river.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.179-186
• /
• 2007

This paper has investigated a rise of water level in upstream and downstream of bridge, which is caused by accumulation of debris in a bridge. The debris has been classified into several types in terms of size. The rise of water level which has been caused by installation and removal of sheet pile that is used to block water in a bridge has been analyzed using HEC-RAS model. According to the analysis, it has turned out that the debris has no influence on the rise of water level in ordinary water flow. In addition, sheet pile has little impact on the rise of water as well. Even though the impact of sheet file has turned out trivial in flood flow just like the ordinary water flow, it's been simulated that the maximum water level difference between upstream and downstream of bridge turned out more than 1.0meter because of debris in 80-year or more flood frequency. When the rise of water level in upstream from the cross section of the bridge was investigated based on 100-year flood frequency, besides, it has turned out that it had an influence up to 17.84km distance because of the effect of debris.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.91-103
• /
• 2013

In this Research, in order to improve problems of not enough technical validation and structural and hydraulic stability evaluation when nature-friendly revetment block is applied to field, hydraulic stability evaluation according to hydraulic behavior change of porosity soil block for vegetation reinforcement that secures ecological function was reviewed. By selecting object section, numerical analysis and hydraulic model experiments were performed; for numerical analysis, by using 1-dimensional numerical analysis model HEC-RAS and 2-dimensional numerical analysis RMA-2, one-dimensional(1D) and two-dimensional(2D) numerical analysis were performed; by applying Froude's similarity law, reduced-scale hydraulic model experiments according to vegetation existence were performed. In hydraulic model experiment, for validity of experiment result, the result of velocity and tractive force of reduced-scale hydraulic model experiments was converted to prototype so that it can be compared and reviewed under the same condition of one-dimensional(1D) and two-dimensional(2D) numerical analysis result; as a result, it was confirmed that comparatively united result appeared, and by comparing prototype-converted tractive force result with revetment's allowable tractive force coming from an existing research, block's hydraulic stability was suggested.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1203-1213
• /
• 2014

The hydraulic characteristics and the patterns of riverbed change had been analysed by HEC-RAS simulation in a reach of Cheong-mi river with and without weir. The corresponding physical disturbance had been evaluated with the method suggested by K-water (2008). The occurrences of low physical disturbance score coincide with the corresponding high bed changes by weir installation. The effects of physical disturbance coincide with the patterns of riverbed change along river reach which shows riverbed change is the important factor to physical disturbance. In case of installation of additional weirs at up and down stream sections of no disturbance effect by the existing weir, no physical disturbances occur in certain sections with confirming the appearance of the similar disturbance scores between the simulation results of with and without additional weir installations. In case of installation of additional weirs at up and down stream sections of disturbance effect margins by the existing weir, physical disturbances occur at every section. In case of installation of additional weirs at up and down stream sections within disturbance effect by the existing weir, low physical disturbance scores are given at every section because of superposition of disturbance along river reach. The physical disturbance would be minimized such that the additional weir is installed with sufficient distances of no disturbance and bed change effects along river reach.

• Ecology and Resilient Infrastructure
• /
• v.10 no.4
• /
• pp.97-106
• /
• 2023

This study analyzed morphological changes in the Singwangcheon and Naengcheon streams in Pohang caused by flooding due to Typhoon Hinnamnor. Analysis of the changes in river channel area from the past to recent times using aerial photos and drone-taken images showed that the river width had gradually decreased since the 1960s. However, after the flood, the river width increased again. Changes in the river cross-section before and after the flood show that a large amount of coarse sediment was deposited inside the river bend while the outer bank was eroded. The water levels calculated using HEC-RAS for the pre-flood cross-section based on the flood frequency discharges and estimated discharge from Oer Reservoir were significantly lower than the observed water level, which means that the cross-sectional change was not considered. The results of this study suggest that it is necessary to consider cross-sectional changes due to sediment transport when estimating the flood level of small and medium-sized mountain streams, and it is needed to investigate the geomorphic changes after floods.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.291-295
• /
• 2007

FTL(Fuel Test Loop) is a facility that confirms performance of nuclear fuel at a similar irradiation condition with that of nuclear power plant. FTL consists of In-Pile Test Section (IPS) and Out-Pile System (OPS). FTL construction work began on August, 2006 and ended on March, 2007. During Construction, ensuring the worker's safety was the top priority and installation of the FTL without hampering the integrity of the HANARO was the next one. Task Force Team was organized to do a construction systematically and the communication between members of the task force team was done through the CoP(community of Practice) notice board provided by the Institute. The installation works were done successfully overcoming the difficulties such as on the limited space, on the radiation hazard inside the reactor pool, and finally on the shortening of the shut down period of the HANARO. Without a sweet of the workers of the participating company of HEC(Hyundae Engineering Co, Ltd), HDEC(HyunDai Engineering & Construction Co. Ltd), equipment manufacturer, and the task force team, it is not possible to install the FTL facility within the planned shutdown period. The Commissioning of the FTL is on due to check the function and the performance of the equipment and the overall system as well. The FTL shall start operation with high burn up test fuels in early 2008 if the commissioning and licensing progress on schedule.