• Journal of Food Hygiene and Safety
• /
• v.31 no.1
• /
• pp.28-35
• /
• 2016

Species identification of animal tissues in meat products is an important issue to protect the consumer from illegal and/or undesirable adulteration; for economic, religious and health reasons. In this reason, accurate analytical methods are needed for the labeling of meat products with requiring simple and fast procedure. Recently, applications of PCR in food analysis have been increased because of their simplicity, specificity and sensitivity. Therefore, in this study, a multiplex PCR assay was developed for the simultaneous identification of eight species of cow, pig, chicken, duck, goat, sheep, horse and turkey from raw meats. The primers were designed in different regions of mitochondrial 16S RNA after alignment of the available sequences in the GenBank database. Two multiplex primer sets were designed as Set 1 (cow, pig, chicken, duck) and Set 2 (goat, sheep, horse, turkey), respectively. Total 274 samples from cow (n = 55), pig (n = 30), chicken (n=30), and duck (n = 30), goat (n = 40), sheep (n = 33), horse (n = 41), and turkey (n = 15) were tested. The primers generated specific fragments of 94, 192, 279, 477 bp (pig, chicken, cow, duck), 670, 271, 152, 469 bp (goat, sheep, horse, turkey) lengths for eight species, respectively. The animal species specificity was 100% in all eight samples in the multiplex PCR assay. The detection limit of the multiplex PCR assay showed from 100 fg to 1 pg of template DNA from extracted from raw meats. When applying multiplex PCR assays to sample from pork/beef and pork/chicken, beef/chicken tested raw mixed meats and heat-treated ($83^{\circ}C$ for 30min, $100^{\circ}C$ for 20min, and $121^{\circ}C$ for 10min) mixtures, detection limit was 0.1% level beef, pork and pork in beef and chicken in pork and 1.0% level pork in chicken. This study suggest that the developed multiplex PCR assay can be used for rapid and simultaneous species identification of cow, pig, chicken, duck, goat, sheep, horse and turkey from meats.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.168-177
• /
• 2009

This study was conducted to investigate the dietary effects of locally grown herbs (Mentha piperascens, PM; Rubus coreanus, RC; Tagetes patula, MG) on the growth performance and meat quality of broiler chicken. A total of 600 1-d-old Ross male broiler chicks were divided into eight groups and were fed control diets (antibiotics-medicated or non-medicated commercial diets) or experimental diets (non-medicated diets containing 0.3 or 0.5% PM, 0.3 or 0.5% RC, or 0.3 or 0.5% MG) for 5wk. The body weight gains and feed conversion rates (FCRs) in all the groups that were fed diets containing PM, RC, or MG were significantly improved compared to those in the non-medicated control group (p<0.05). The relative weights of various organs, the serum cholesterol levels, and the GOT/GPT activities in all the groups were also not significantly different. The superoxide dismutase (SOD)-like activities in the groups that were fed diets containing 0.3% PM or 0.3% MG were significantly increased compared to those in the non-medicated control group (p<0.05). The number of cecal lactic-acid bacteria in the groups that were fed diets containing 0.3% PM or 0.5% RC tended to increase. The malondialdehyde contents in the leg muscles were significantly lowered by feeding with PM or MG (p<0.05). The physicochemical properties of the edible meat, including the shear force, water-holding capacity, heat loss, pH, and muscle color degrees $(CIEL^*.\;a^*.\;b^*)$, were not affected by the dietary treatments. It has been suggested that spontaneous Korean plants promote the growth of broilers and may delay lipid oxidation in edible muscles without any negative effect when added in broiler diets.

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.700-708
• /
• 1996

Electroless plating technique was utilized to flip chip bonding to improve surface mount characteristics. Each step of plating procedure was studied in terms pf pH, plating temperature and plating time. Al patterned 4 inch Si wafers were used as substrstes and zincate was used as an activation solution. Heat treatment was carried out for all the specimens in the temperature range from room temperature to $400^{\circ}C$ for $30^{\circ}C$ minutes in a vacuum furnace. Homogeneous distribution of Zn particles of size was obtained by the zincate treatment with pH 13 ~ 13.5, solution concentration of 15 ~ 25% at room temperature. The plating rates for both Ni-P and Au electroless plating steps increased with increasing the plating temperature and pH. The main crystallization planes of the plated Au were found to be (111) a pH 7 and (200) and (111) at pH 9 independent of the annealing temperature.

• Korean Journal of Ecology and Environment
• /
• v.50 no.1
• /
• pp.29-45
• /
• 2017

This study explored spatiotemporal variability of water quality in correspondence with hydro-meteorological factors in the four stations of Euiam Reservoir located in the upstream region of the North-Han River from May 2012 to December 2015. Seasonal effect was apparent in the variation of water temperature, DO, electric conductivity and TSS during the study period. Stratification in the water column was observed in the near dam site every year and vanished between August and October. Increase of nitrogen nutrients was observed when inflowing discharge was low, while phosphorus increase was distinct both during the early season with increase of inflowing discharge and the period of severe draught persistent. Duration persisting high concentration of Chl-a (>$25mg\;m^{-3}$: the eutrophic status criterion, OECD, 1982) was 1~2 months of the whole year in 2014~2015, while it was almost 4 months in 2013. Water quality of Euiam Reservoir appeared to be affected basically by geomorphology and source of pollutants, such as longitudinally linked instream islands and Aggregate Island, inflowing urban stream, and wastewater treatment plant discharge. While inflowing discharge from the dams upstream and outflow pattern causing water level change seem to largely govern the variability of water quality in this particular system. In the process of spatiotemporal water quality change, factors related to climate (e.g. flood, typhoon, abruptly high rainfall, scorching heat of summer), hydrology (amount of flow and water level) might be attributed to water pulse, dilution, backflow, uptake, and sedimentation. This study showed that change of water quality in Euiam Reservoir was very dynamic and suggested that its effect could be delivered to downstream (Cheongpyeong and Paldang Reservoirs) through year-round discharge for hydropower generation.

• Food Science of Animal Resources
• /
• v.22 no.4
• /
• pp.289-293
• /
• 2002

This study was conducted to investigate changes of pH, meat color, cooking loss, shear force and sensory evaluation on Hanwoo meat fed with supplemental fig fermentation(SFF) during storage period. A total of 10 Hanwoo bulls were subjected to one of two treatment diets (control and 10% SFF) from live weight of 400kg far 6 months. After slaughter, longissimus muscles were removed, zipper-wrapped and stored at 4$\^{C}$ for 21 days. The pH, meat color, cooking loss, shear force and sensory evaluation of the samples were measured at 1, 3, 9, 15, 21 days of storage. There were no differences in pH, meat objective color(Hunter L, a and b) and cooking loss (%) of longissimus muscles between control and SFF treatment during storage. Shear force values of longissimus muscle from SFF treatment showed lower level in 1, 3 and 9 days and tended to decrease during storage. No differences in odor and appearance of sensory evaluation were observed between control and SFF treatment during storage. The taste induced by SFF was increased(f<0.05) at 1, 3 and 9 days of storage. These results indicate that the SFF may improve meat quality of Hanwoo during storage.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.1
• /
• pp.72-75
• /
• 2006

Background : This report reviews our experience with persistent air leaks in the peumothorax that were not considered candidates for surgical treatment in order to evaluate the efficacy and risks of the OK-432 plus autoblood or OK-432 pleurodesis. Material & Methods : From March 2004 to July 2005, 8 consecutive patients who had an air leak in the pneumothorax over 5 days and had been treated with OK-432 plus autoblood or OK-432 pleurodesis. The patients were not considered candidates for surgical treatments because the chest CT findings revealed severe chronic lung disease with multiple bullae and/or bullous changes. A prolonged air leak with/without dead space was treated with either OK-432 plus autoblood or OK-432 pleurodesis. The efficacy and side effects of OK-432 pleurodesis were assessed by determining the duration of the air leak, the number of pleurodesis, the patients' symptoms, measurements of the white blood cell count and the c-reactive protein level. Results : All of eight patients were male and the mean age was $72.4{\pm}8.5$. The mean number of pleurodesis was $1.9{\pm}1.1$ and the mean duration of the air leak was $4.6{\pm}4.6days$ after pleurodesis. Side effects after pleurodesis were encountered in 7 patients, which included a chilling sensation in 7 cases, chest pain in 5 cases, headache in 3 cases, local heat sensation in 2 cases, and fever in 1 case. Leukocytosis was observed in 6 patients, and the mean of WBC count and CRP were $14500{\pm}2100$ and $21.9{\pm}11.4mg/dL$, respectively. Conclusion : Either OK-432 plus autoblood or OK-432 pleurodesis has acceptable side effects, and can be considered a treatment option for persistent air leaks in the pneumothorax that are not candidates for surgical treatment.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.263-275
• /
• 2014

It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.2
• /
• pp.166-172
• /
• 2002

The top shell, Omphalius pfeifferi capenteri meat vacuum-packed in can (diameter$\times$height, 74.1mm$\times$50.7mm) were heated at 115$^{\circ}C$ up to $F_0$ values of 5 min, 10 min, 15 min and 20 min, and the changes in food components were studied. After 14 days storage at 37$^{\circ}C$ and 55$^{\circ}C$, no growth of microorganism and panelling were recognized from the canned meats which were sterlized at 115$^{\circ}C$ with $F_0$ value of S min and over. In the case of proximate composition of the canned meats, the moisture content decreased with the increase of $F_0$ value, while crude protein increased. The increase of volatile basic nitrogen content, pH and degree of browning and the decrease of mineral, total amino acid, free amino acid, trimethylamine oxide, total creatinine contents and yields were observed during thermal processing, In sensory evaluation on color, texture and taste in the canned meats, no significant difference was observed among a boiled sample and the canned meats heated at re value of 10 min and below. But, in the canned meats heated at $F_0$ value of over 15 min, its sensory scores decreased with the increase of $F_0$ value. From these results, the reasonable $F_0$ value for preparation of the heat-treated top shell meats was in the range of 5$\~$10 min.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.361-367
• /
• 1984

In previous paper(Lee et al., 1984), preparation formula and processing conditions of the fish meat (mackerel) paste using dielectric heating were described, that included the proper shape and size of product and the conditions of dielectric heating, hot air dehydration, and heating with electric heater to yield the minimum expansion and case hardening during heating and to controll the final rater activity of 0.86 to 0.83 accompanying with a complete reduction of viable cells and good texture. In present study, changes in VBN, pH, total plate count, water activity, texture, the loss of available lysine, color indexes, TBA value, and the content of TI were determined to assess the quality stability and shelf-life of the product during the storage for 35 days at $5^{\circ}C\;and\;25^{\circ}C$, respectively. And the effect of vacuum sealing and hot water treatment before storage on the storage stability of product was also mentioned. As the product was vacuum packed in K-flex film bag, heat treated in boiling water for 6 minutes, and stored, water activity was maintained 0.86 to 0.84 for 35 days regardless of storage temperature, and the increase of total plate count was negligible in case of $5^{\circ}C$ storage while tended to gain slightly after 25 days at $25^{\circ}C$ storage. Changes in VBN was also minimum with an increase of 1.5 mg/100g at $5^{\circ}C$ and 7.0mg/100g at $25^{\circ}C$, but in case of unpacked sample, it was 24.5mg/100g at $5^{\circ}C$ and 42.4 mg/100g at $25^{\circ}C$ even after 7 days. In textural property hardness tended to increase after 28 days and folding test score was down to A or B from AA grade. The loss of available lysine was $7.5\%\;at\;5^{\circ}C$ and $17.0\%\;at\;25^{\circ}C$ but brown color was not deeply developed as the color index score indicated. TBA value was not increased at $5^{\circ}C$ while it tended to increase rapidly after 30 days at $25^{\circ}C$. Changes in TI content was not obvious except that it showed a tendency of increase at the end of storage as well as in the change of lysine and TBA value. It is concluded from the results that the quality of the product, pasteurized and water activity controlled by dielectric heating, and vacuum packed in K-flex film would be stable for more than 35 days at $5^{\circ}C$ and at least 25 days even at room temperature.