• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.2
• /
• pp.102-108
• /
• 2016

Der p 2 is the major allergen of the house dust mite (HDM) associated with the development of allergic diseases. The pathogenic mechanism of the allergy is related to cytokine release of lymphocytes and constitutive apoptosis of neutrophils. In the present study, we examined whether Der p 2 induces cytokine release of lymphocytes, which is involved in regulation of neutrophil apoptosis. In normal and allergic subjects, Der p 2 enhanced the secretion of IL-6, IL-8, MCP-1, and GM-CSF in a time-dependent manner. Although Der p 2 was weakly effective against neutrophil apoptosis, conditioned media collected from normal and allergic lymphocytes after Der p 2 treatment inhibited the apoptosis of normal and allergic neutrophils. Der p 2 showed stronger inhibition of apoptosis of allergic neutrophils cocultured with allergic lymphocytes than normal neutrophils cocultured with normal lymphocytes. These findings improve our understanding of the role of Der p 2 in regulation of lymphocytes and neutrophils and will enable elucidation of allergy pathogenesis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.106-106
• /
• 2019

많은 도심의 하천들은 오염물질의 유입에 취약하다. 최근 신소재 공학 등 첨단산업이 발전하게 되면서 유해화학물질의 유입문제는 더욱 대두되고 있으며, 실제로 최근 유해화학물질 유입사고 발생건수가 늘어나고 있다. 특히 국내 취수량의 90%는 지표수에서 취수하고 있어, 하천오염사고는 직접적인 피해로 이어지게 된다. 따라서 이러한 사고에 대응하기 위하여 수환경에 유입된 유해물질의 거동 매커니즘을 반영한 수질해석이 필요하다. 수체 내에 유입된 유해화학물질은 기본적으로 흐름에 따른 이송 확산을 하며 흡 탈착, 휘발, 침전 부유, 생화학 반응과 같은 다양한 반응과 함께 혼합거동을 한다. 특히 소수성물질의 경우 용해된 상태뿐만 아니라, 유사에 흡착된 상태로 수체에 존재하게 된다. 결국 유해화학물질의 거동을 해석하기 위해서는 유체의 흐름 해석뿐만 아니라 수체에 존재하는 유사의 이송 또한 해석해야한다. 본 연구에서는 흐름해석을 위하여 서울대에서 개발한 흐름모형(HDM-2D)을 사용하였으며, 부유사 거동모의를 위해 부유사거동모형(STM-2D)을 개발하였다. 또한 유해화학물질의 거동모의를 위해 서울대에서 개발한 수질모형(CTM-2D)에 생성/소멸항을 추가하였으며 흐름모형과 부유사모형과의 연계를 통해 유해화학물질의 혼합거동 수치모형을 개발하였다. 각 반응항(흡 탈착, 휘발, 침전 부유, 생화학 반응)을 수치모형에 반영 시에는 보통 두 계(물-토양, 물-공기) 사이의 선형 물질교환으로 이해된다. 따라서 물질의 각 반응 별 평형농도와 물질교환속도계수를 추정식을 통해 산정하여 사용하게 된다. 하지만 각 기작이 반영유무에 따라 계산시간 및 필요입력변수가 늘어나게 되므로, 유해화학물질 유입사고와 같은 빠른 대처가 필요한 경우 각 반응 텀의 유의성을 판단하여 모형에 반영여부를 결정을 통해 경제적인 모의를 할 수 있어야 한다. 이에 따라 본 연구에서는 개발된 모형의 각 매개변수들의 민감도를 분석하고, 흐름조건 및 물질의 특성에 따른 반응항의 유의성을 판단하였다. 본 연구에서는 개발된 모형(부유사거동모형, 유해화학물질의 혼합거동모형)은 해석해 및 현장 데이터와 비교검증을 통해 개발을 완료하였으며, 각 반응항의 민감도 분석을 통해 매개변수의 임계값을 결정하였다.

• Molecules and Cells
• /
• v.44 no.8
• /
• pp.580-590
• /
• 2021

Patients with severe asthma have unmet clinical needs for effective and safe therapies. One possibility may be mesenchymal stem cell (MSC) therapy, which can improve asthma in murine models. However, it remains unclear how MSCs exert their beneficial effects in asthma. Here, we examined the effect of human umbilical cord blood-derived MSCs (hUC-MSC) on two mouse models of severe asthma, namely, Alternaria alternata-induced and house dust mite (HDM)/diesel exhaust particle (DEP)-induced asthma. hUC-MSC treatment attenuated lung type 2 (Th2 and type 2 innate lymphoid cell) inflammation in both models. However, these effects were only observed with particular treatment routes and timings. In vitro co-culture showed that hUC-MSC directly downregulated the interleukin (IL)-5 and IL-13 production of differentiated mouse Th2 cells and peripheral blood mononuclear cells from asthma patients. Thus, these results showed that hUC-MSC treatment can ameliorate asthma by suppressing the asthmogenic cytokine production of effector cells. However, the successful clinical application of MSCs in the future is likely to require careful optimization of the route, dosage, and timing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.279-289
• /
• 2000

Residual stress induced in U-bending and tube-to-tubesheet joint processes of PWR's row-1 heat exchanger tube was measured by X-ray method and Hole-Drilling Method(HDM). Compressive residual stresses(-) at the extrados surface were induced in U-bending, and its maximum value reached -319 MPa in axial direction at the position of $\psi$ = $0^{\circ}$. Tensile residual stresses(+) of $\sigma_{zz}$ = 45 MPa and $\sigma_{\theta\theta}$ = 25 MPa were introduced in the intrados surface at the position of $\psi$ = $0^{\circ}$. Maximum tensile residual stress of 170 MPa was measured at the flank side at the position of $\psi$ = $90^{\circ}$, i.e., at apex region. It was observed that higher stress gradient was generated at the irregular transition regions (ITR). The trend of residual stress induced by U bending process of the tubes was found to be related with the change of ovality. The residual stress induced by the explosive joint method was found to be lower than that by the mechanical roll method. The gradient of residual stress along the expanded tube was highest at the transition region (TR), and the residual stress in circumferential direction was found to be higher than the residual stress in axial direction.

• Journal of Korean Public Health Nursing
• /
• v.16 no.1
• /
• pp.30-44
• /
• 2002

The purpose of this study were to identify seasons variation of house dust mites allergen and perceived allergic symptom. The subjects were consisted of 29 family with allergy patients and 34 family without allergy patients. Perceived allergic symptoms were accessed and house dust was sampled from beds, floor of bedroom, kitchen and livingroom in spring(August), summer (July), fall(October) and winter(January) and tested using two-site ELISA. The results were as follows; 1) In all family, amount of house dust mites allergen(Der fI) of livingroom floor was the highest in summer$(4.73{\mu}g/1g\;of\;dust)$, and then fall$4.67{\mu}g/1g\;of\;dust)$, winter$(3.94{\mu}g/1g\;of\;dust)$, spring$(1.73{\mu}g/1g\;of\;dust)$. 2) In family with allergy patients, amount of house dust mites allergen(Der fI) of bedroom floor was highest in fall $(9.75{\mu}g/1g\;of\;dust)$. 3) In family with allergy patients, amount of house dust mites allergen(Der fI) of mattress was highest in fall$(8.23{\mu}g/1g\;of\;dust)$. 4) Perceived allergic symptom scores of family with allergy patients were higher than family without allergy patients in all seasons. In family without allergy patients, perceived allergic symptom scores was the highest in spring(4.29) and perceived allergic symptom scores of family with patients was the highest in winter(2.49). 5) The relationship of house dust mites allergen and perceived allergic symptom scores were positively related (r=.941, p=.000). Perceived allergic symptoms were correlated with amount of house dust mites allergen, That is, perceived allergic symptoms were became worse by house dust mites allergen. So House dust mites allergen reducing strategies and intervention should be recommended in further study.

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.128-134
• /
• 2020

Recently, the damages by typhoons and heavy rains are increasing due to the climate change. However, we are still vulnerable to inundation disaster due to various causes such as poor physical flood control and lacks of disaster and safety management. Therefore, it is necessary to establish systems to ensure safety and prepare practical countermeasures that can minimize damage when an inundation occurs, thereby minimizing economic loss and casualty. In this study, hydrodynamic inundation modelings were implemented to analyze the "Noryangjin reservoir inundation accident" and "Choryang No. 1 underground road inundation accident." and spatial risk was assessed by a quantitative hazard index. In addition, cause and effect diagrams were provided to present the risk causes in terms of physical and managemental aspects.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.62-62
• /
• 2009

석탄화력발전소의 CO2배출량 감소와 고효율, 대용량화로 인해 초초임계압(USC:Ultra Super Critical) 화력발전소의 건설이 증가하고 있다. USC 발전소는 효율향상을 위한 증기온도와 압력의 상승 때문에 보일러 고온고압부에 기존의 소재에 비해 고온강도와 내산화성의 재료물성이 향상된 신소재 적용이 불가피하다. 특히 사용된 신소재 중에서 보일러 본체를 구성하는 수냉벽관(Water wall), 과열기와, 재열기용 튜브 및 후육부인 헤더와 배관재로 기존의 2.25Cr-1Mo강을 개량한 2.25Cr-1.6W계 내열강이 적용되고 있다. 2.25Cr-1.6W강은 SMI와 MHI가 공동개발한 소재로 1995년 튜브제품이, 1999년에 단조, 파이프재, 플레이트제품이 ASME code case로 등재되었고, 2009년 ASME code case 2199-4로 개정되어 사용 중이다. 이 소재는 2.25Cr-1Mo강에 고온강도 개선을 위해 석출강화효과가 있는 V과 Nb을 첨가하였고, 탄화물의 열적안정성과 고용강화효과 증대를 위해 W을 첨가하였다. 그리고 제작성과 용접성 및 재료의 인성 향상을 위해 B첨가와 C함량을 낮추었다. 합금성분의 첨가와 조정에 의해 고온강도는 개선되었지만, 보일러 설치 및 보수를 위한 용접과정에서 용접금속과 CGHAZ(Coarse Grain HAZ)에서 용접균열이 발생하였다. 대부분의 용접균열은 용접결함이나 고온 혹은 저온균열이 아닌 2.25Cr-1.6W계강의 강도 개선을 위해 첨가한 V과 Nb이 용접후열처리 도중 입내에 MX형태의 미세석출로 입내를 강화시킴으로서 발생한 재열균열 민감성 증대에 기인된 것으로 판단된다. 이에 본 연구에서 용접 및 후열처리 과정에서 용접금속과 HAZ에서 발생하는 용접금속의 응력분포를 전산해석을 통해 확인하고 실제 후육파이프 용접부에서 잔류응력을 측정해 비교하였다. 용접부 응력분포는 SYSWELD 프로그램을 사용해 해석을 수행하였고, 발전소 실배관재의 용접부 응력측정은 수평부 측정이 용이하도록 지그를 부착한 Potable 잔류응력측정기를 사용해 Hole Drilling Method(HDM)를 적용하여 잔류응력을 측정하였다. 해석 결과 CGHAZ부위의 잔류응력이 용접금속과 기타 부위에 비해 높은 응력분포를 나타냈으며, 이는 CGHAZ와 용접용융선 부근에서 균열이 발생하는 실제값과 일치하는 결과를 보였다. 실제 배관재 용접부에서 측정한 잔류응력값은 항복응력의 약 50% 이하 응력값을 나타냈다. 배관 구조에 기인한 시스템응력의 영향을 제거하기 위해 배관재 용접부를 중심으로 양끝단을 절단 후 용접부에서 측정한 응력은 항복응력 대비 25%수준의 낮은값을 보였다. 그러나 배관재가 장기간 고온환경에 노출되었고 용접금속 내부의 균열이 발생한 상태에서 측정하였기 때문에 용접잔류응력은 상당부분 해소되어 상대적으로 낮은 응력값이 얻어진 것으로 판단된다.

• Clean Technology
• /
• v.17 no.1
• /
• pp.56-61
• /
• 2011

In this study, hydrocarcking of vacuum residue was carried out in an autoclave reactor at $450^{\circ}C$ and $500^{\circ}C$ with a commercial catalyst (HDM) and the quantitative product distributions were analyzed by GC-SIMDIS method or simple distillation. During catalytic hydrocracking, thermal cracking also occurred together with catalytic cracking and the higher conversion and selectivity of gasoline and naphtha were obtained at high reaction temperature. GC-SIMDIS and simple distillation revealed different results for the analysis of products produced at different hydrocracking temperatures; almost same results were obtained for the product produced at $500^{\circ}C$ but different ones for the product produced at $450^{\circ}C$. In the analysis of product produced at $450^{\circ}C$, the GC-SIMDIS showed that a main product was VGO while a main product in the simple distillation was diesel, which implies that the simple distillation for the $450^{\circ}C$ reaction was not accurate due to thermal cracking of the product by the simple distillation.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.215-235
• /
• 1996

The thermal analysis by mathematical model simulation makes it possible to reasonably predict heating and/or cooling requirements of certain greenhouses located under various geographical and climatic environment. It is another advantages of model simulation technique to be able to make it possible to select appropriate heating system, to set up energy utilization strategy, to schedule seasonal crop pattern, as well as to determine new greenhouse ranges. In this study, the control pattern for greenhouse microclimate is categorized as cooling and heating. Dynamic model was adopted to simulate heating requirements and/or energy conservation effectiveness such as energy saving by night-time thermal curtain, estimation of Heating Degree-Hours(HDH), long time prediction of greenhouse thermal behavior, etc. On the other hand, the cooling effects of ventilation, shading, and pad ||||&|||| fan system were partly analyzed by static model. By the experimental work with small size model greenhouse of 1.2m$\times$2.4m, it was found that cooling the greenhouse by spraying cold water directly on greenhouse cover surface or by recirculating cold water through heat exchangers would be effective in greenhouse summer cooling. The mathematical model developed for greenhouse model simulation is highly applicable because it can reflects various climatic factors like temperature, humidity, beam and diffuse solar radiation, wind velocity, etc. This model was closely verified by various weather data obtained through long period greenhouse experiment. Most of the materials relating with greenhouse heating or cooling components were obtained from model greenhouse simulated mathematically by using typical year(1987) data of Jinju Gyeongnam. But some of the materials relating with greenhouse cooling was obtained by performing model experiments which include analyzing cooling effect of water sprayed directly on greenhouse roof surface. The results are summarized as follows : 1. The heating requirements of model greenhouse were highly related with the minimum temperature set for given greenhouse. The setting temperature at night-time is much more influential on heating energy requirement than that at day-time. Therefore It is highly recommended that night- time setting temperature should be carefully determined and controlled. 2. The HDH data obtained by conventional method were estimated on the basis of considerably long term average weather temperature together with the standard base temperature(usually 18.3$^{\circ}C$). This kind of data can merely be used as a relative comparison criteria about heating load, but is not applicable in the calculation of greenhouse heating requirements because of the limited consideration of climatic factors and inappropriate base temperature. By comparing the HDM data with the results of simulation, it is found that the heating system design by HDH data will probably overshoot the actual heating requirement. 3. The energy saving effect of night-time thermal curtain as well as estimated heating requirement is found to be sensitively related with weather condition: Thermal curtain adopted for simulation showed high effectiveness in energy saving which amounts to more than 50% of annual heating requirement. 4. The ventilation performances doting warm seasons are mainly influenced by air exchange rate even though there are some variations depending on greenhouse structural difference, weather and cropping conditions. For air exchanges above 1 volume per minute, the reduction rate of temperature rise on both types of considered greenhouse becomes modest with the additional increase of ventilation capacity. Therefore the desirable ventilation capacity is assumed to be 1 air change per minute, which is the recommended ventilation rate in common greenhouse. 5. In glass covered greenhouse with full production, under clear weather of 50% RH, and continuous 1 air change per minute, the temperature drop in 50% shaded greenhouse and pad ＆ fan systemed greenhouse is 2.6$^{\circ}C$ and.6.1$^{\circ}C$ respectively. The temperature in control greenhouse under continuous air change at this time was 36.6$^{\circ}C$ which was 5.3$^{\circ}C$ above ambient temperature. As a result the greenhouse temperature can be maintained 3$^{\circ}C$ below ambient temperature. But when RH is 80%, it was impossible to drop greenhouse temperature below ambient temperature because possible temperature reduction by pad ||||&|||| fan system at this time is not more than 2.4$^{\circ}C$. 6. During 3 months of hot summer season if the greenhouse is assumed to be cooled only when greenhouse temperature rise above 27$^{\circ}C$, the relationship between RH of ambient air and greenhouse temperature drop($\Delta$T) was formulated as follows : $\Delta$T= -0.077RH＋7.7 7. Time dependent cooling effects performed by operation of each or combination of ventilation, 50% shading, pad ＆ fan of 80% efficiency, were continuously predicted for one typical summer day long. When the greenhouse was cooled only by 1 air change per minute, greenhouse air temperature was 5$^{\circ}C$ above outdoor temperature. Either method alone can not drop greenhouse air temperature below outdoor temperature even under the fully cropped situations. But when both systems were operated together, greenhouse air temperature can be controlled to about 2.0-2.3$^{\circ}C$ below ambient temperature. 8. When the cool water of 6.5-8.5$^{\circ}C$ was sprayed on greenhouse roof surface with the water flow rate of 1.3 liter/min per unit greenhouse floor area, greenhouse air temperature could be dropped down to 16.5-18.$0^{\circ}C$, whlch is about 1$0^{\circ}C$ below the ambient temperature of 26.5-28.$0^{\circ}C$ at that time. The most important thing in cooling greenhouse air effectively with water spray may be obtaining plenty of cool water source like ground water itself or cold water produced by heat-pump. Future work is focused on not only analyzing the feasibility of heat pump operation but also finding the relationships between greenhouse air temperature(T$_{g}$ ), spraying water temperature(T$_{w}$ ), water flow rate(Q), and ambient temperature(T$_{o}$).