• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.161-168
• /
• 2000

In this paper, machining characteristics of glass for HDD media are researched. Nowadays HDD media are used globally as a data storage device. In generally, it is machined by the lapping. But the lapping process time is long and the productivity is low. In this reason, 1 examined the possibility of ELID grinding of glass fur HDD media. If the machining process of HDD media can be changed to ELID grinding, a product cost will be largely saved. The machines used in this experiment were a special rotary type grinder and a normal rotary grinder. The one has an air bearing spindle, the other has not. Experimental results show the possibility of highly efficient grinding and mirror surface can be achieved by the ELID grinding.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.2
• /
• pp.61-66
• /
• 2000

In this paper, we discuss the machining characteristics of HDD glass. Glass is now being used globally as a data storage device, Such glasses are usually machined by lapping by this technique requires a long machining time, resulting in low productivity, For this reason, we examine the possibility of EILD grinding in HDD glass workpieces, A move to ELID grinding may result in substantial cost reduction. Our purpose is to investigate the grinding characteristics of HDD glass in ELID grinding. The bonding materials for fixing the abrasives of cast iron, cobalt and bronze are applied, and grinding conditions such as rotation speed and feeding are varied. Results show that with the use of ELID, mirror surfaces can be achieved with high efficiency.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.842-845
• /
• 2000

It is essential to reduce stiction between the slider and the disk for super-smooth media such as glass disk for high density recording. We developed a stiction-reduced slider by fabricating mechanical bumps on the air bearing surface of the slider by indentation technique. This paper presents a possibility and concept of Stiction-Free-Slider which can operate on the data zone of a magnetic disk. The slider hat many bumps and their heights are in the tens of nm range. The SFS shows good performance on the data zone. Moreover, little wear of the bumps was observed when the preload was small.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.174-185
• /
• 2005

This paper presents the design, fabrication, and testing results of a dual stage actuator system for a fine positioning of magnetic heads in magnetic disk drives. A novel rotary microactuator which is electrostatically driven and utilized as a secondary actuator was designed. The stator and rotor electrodes in the microactuator was revised to have the optimal shapes and hence produces much higher rotational torque compared with the conventional comb-shape electrodes. The microactuators were successfully fabricated using SoG(silicon on glass) processing technology, which is known as being cost-effective. The fabricated microactuator has the structural thickness of $45{\mu}m$ with the gap width of approximately $3{\mu}m$. The dynamic characteristic of microactuator/slider assembly was investigated, and its natural frequency and DC gain were measured to be 3.4kHz and 32nm/V, respectively. The microactuator/slider assembly was integrated into a HDD model V10 of Samsung Electronics Co. and a dual servo algorithm was tested to explore the tracking performance of dual stage actuator system where the LDV signals instead of magnetic head signals were used. Experimental results indicate that this system achieves the tracking accuracy of 30nm. This value corresponds to a track density of 85,000 track per inch(TPI), which is about 3 times greater than that of current hard disk drives.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.65-68
• /
• 2001

본 연구에서는 코움 드라이브에 비해 구동력은 크고 평행 판 구동 방식에 비해서는 선형 특성이 우수하며 안정된 구동거리가 증가하는 특성을 갖는 새로운 정전력(electrostatic force) 구동 방식을 제안한다. 운동 전극과 고정 전극을 기울어지게 배치하여 전극 면에 평행한 정전력 $F_x$와 전극 면에 수직인 정전력 $F_y$의 합력 $F_e$ 방향으로 전극을 운동시킴으로써 정전력의 방향과 전극의 운동 방향을 일치시킨다. 제안된 구동방식의 정전력 모델을 이용한 해석 결과 코움 드라이브에 비해서는 구동력이 50 % 이상 크며 평행 판 구동에 비해서는 안정된 구동 거리가 10 - 30 % 이상 증가하는 구동 특성을 얻을 수 있었다. 제안된 구동방식을 이용하여 HDD의 트랙 방향 저장 밀도를 증가시키기 위한 듀얼스테이지 서보(dual-stage servo)에 사용 될 마이크로 액츄에이터 (microactuator)를 설계하고 SoG(Silicon on Glass) 공정을 이용하여 제작하였다.