• Journal of Korea Multimedia Society
• /
• v.20 no.6
• /
• pp.853-864
• /
• 2017

HD padding area is essential redundancy in HD broadcasting. It is possible to use this padding area for the purpose of improving DTV broadcasting services. For utilization of this area, The bit of a service data was converted to black and white $8{\times}8$ block image. Converted block images are compressed with active video and are delivered to a receiver as only DC coefficients in a video stream. video quality is not effected by the proposed method, and service data was perfectly recovered in receiver without errors by using block average and threshold. The proposed utilization of HD essential padding area can possibly overcome the limited transmission stream rate with the bandwidth of HD broadcasting. If service data in transport or video stram were transferred using this padding area, it is possible to improve video quality with expanded video stream rate. Additionally, because the proposed methods are based on well-established standards, it is also useful for world-wide HD broadcasting systems such as ATSC, DVB, and IPTV.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.856-864
• /
• 2016

Recently, HD transmission was commonplace in the case of the terrestrial broadcasting, furthermore, 4k UHD broadcasts are also being pilot and such as HD contents are common even in smart-phones. Like this, through both the content and audience are in the situation to take advantage of the HD mobile TV, only QVGA video contents are being transmitted in the terrestrial DMB broadcasting. In this paper, introduction plan of HD DMB service for activation of DMB industry will be described in terms of technical, institutional, and policy to overcome the limitations of such as DMB broadcasting. Due to the introduction of HD DMB, high quality contents will be provided to audience and the advertising revenue DMB broadcasters increased so that the market share of DMB in mobile broadcasting be recovered.

• Journal of IKEEE
• /
• v.15 no.2
• /
• pp.179-189
• /
• 2011

This paper presents an SVC based multi-channel transmission technique. Transmission of high definition multimedia and its service efficiency can be significantly improved by the proposed method. In this method, the HD stream is divided into the two layer streams, i.e., a base layer stream and an enhancement layer stream. The divided streams are transmitted through a primary channel and an auxiliary channel, respectively. The proposed technique provides a noble mode switching technique which enables a seamless service of HD multimedia even under the conditions of abrupt and intermittent deterioration of the auxiliary channel. When the enhancement layer stream is disrupted by the channel monitoring in the mode switching algorithm, the algorithm works further to maintain the spatial and time resolution of the HD multimedia by upsampling and interpolating the base layer stream, consequently serving for the non disrupted play of the media. Moreover, the adoption of an adaptive switching algorithm significantly reduces the frequency of channel disruption avoiding the unnecessary switching for the short period variations of the channel. The feasibility of the proposed technique is verified through the simulation study with an example application to the simultaneous utilization of both Ku and Ka bands for HD multimedia broadcasting service. The rainfall modeling and the analysis of the satellite channel attenuation characteristics are performed to simulate the quality of service performance of the proposed HD broadcasting method. The simulation results obtained under a relatively poor channel (weather) situations show that the average lasting period of enhancement layer service is extended from 9.48[min] to 23.12[min] and the average switching frequency is reduced from 3.84[times/hour] to 1.68[times/hour]. It is verified in the satellite example that the proposed SVC based transmission technique best utilizes the Ka band channel for the service of HD broadcasting, although it is characterized by its inherent weather related poor reliability causing severe limitations in its independent application.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.107-108
• /
• 2006

In order to meet the customers'emerging demands for more bandwidth and diverse IP multimedia applications including high definition(HD) video streaming service, KT presents innovative FTTP solution using WDM-PON system. FTTP comprises an OLT inside the central office, a fiber optic distribution network including a passive remote node in the outside plant, and ONU installed on the pole or wall of customers premise. The passive remote node is located in a manhole near the subscribers and does not require any electrical power supply. And finally, UTP cable is connected from ONU to subscribers'IP appliances like PC or HGW or IP-STB. KT finished its FTTP trial service in 2004 and commercial deployment has begun since 2005. With this FTTP solution, each subscriber can enjoy high-speed internet service with speeds of up to symmetric 100 Mbit/s and various IP media applications including HD quality IP video streaming service and high quality video phone service.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.289-292
• /
• 2007

FTTH (Fiber to the Home) is constructed with optical devices and optical cables from central office (CO) to subscribers. With FTTH, it is possible to provide service platform in order to meet the customers' emerging demands for more bandwidth/security and diverse IP multimedia applications including high definition (HD) video streaming service. FTTH can provide enough bandwidth from 100Mbps to several Gbps per subscriber. It is also most appropriate network architecture for convergence of communication and broadcasting. So, FTTH is thought the final destination of telecom operators, since it is the fastest and most reliable solution so far and various IP multimedia services are possible through it. In this paper, newly attempted technologies of FTTH construction for apartment complexes using CWDM-PON system are discussed.

• Journal of Broadcast Engineering
• /
• v.19 no.6
• /
• pp.767-788
• /
• 2014

The worldwide transition from analog to digital broadcasting has now been completed and the need to study next generation standards for Ultra High Definition TV (UHDTV) broadcasting, and broadcasting & communication convergence systems is rapidly growing. In particular, high resolution mobile broadcasting services are needed to satisfy recent consumers. Therefore, the development of highly efficient convergence broadcasting systems that provide fixed/mobile broadcasting through a single channel is needed. In this paper, a service scenario and requirements for providing 4K UHD & HD convergence broadcasting services through a terrestrial single channel are analyzed by employing the latest transmission and A/V codec technologies. Optimized transmission parameters for 6 MHz & 8 MHz terrestrial bandwidths are drawn, and receiving performances are measured under Additive White Gaussian Noise (AWGN) and time-varying multipath channels. From the results, in a 6 MHz bandwidth, the reliable receiving of HD layer data can be achieved when the receiver velocity is maximum 140 Km/h and is not achieved when the velocity is over 140 Km/h due to the limit of bandwidth. When the bandwidth is extended to 8 MHz, the reliable receiving of both 4K UHD and HD layer data is achieved under a very fast fading multipath channel.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.304-306
• /
• 2004

With the developing of current multimedia broadcasting, user will be provided for lots of various content through the various channel and media. Content provider and consumer want the various service using content with the better quality which is fit to users' preference. For transmitting this content in the limited transmission channel capacity, it needs to transmit the highly compressed content. The content of 3D mesh model-based on MPEG-4 enables the various content service that provides the lower size and the resonable quality, and Personalize(Targeting) service just provide the contents that user more wants and likes. This paper presents the study on the targeting service using compression of 3D mesh model-based on MPEG-4 and the adaptation of Embedded Graphic application program using it.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.16-25
• /
• 2015

Even if the demands for ultra-high-quality multimedia contents are increasing, it is difficult to produce, encode, play and transport ultra-high-quality contents under the existing broadcasting environment. By the reason, various technologies for the UHD contents have been developed in order to satisfy the user's needs. In this paper, we propose a design methodology of a broadcasting system, which consists of two parts, for UHD services with two parts. At the transmit part of the proposed system can encode a video into several layered-bitstreams hierarchically, and then transport each bitstream over heterogeneous networks. The receiver part can play the received video by composing the separated bitstreams. The proposed system can adaptively provide both HD and UHD contents according to user's reception conditions by using the heterogeneous networks.

• Journal of Korea Multimedia Society
• /
• v.18 no.7
• /
• pp.853-863
• /
• 2015

In this paper, we proposed cross-layered approach of video codec and communication system for the efficient video streaming service. Conventional video streaming is served by divided system which consist of video codec layer and communication layer. Its disintegration causes the limitation of the performance of video streaming service. With the cross-layered design, each layer could share the information and the service is able to enhance the performance. And we proposed the selective retransmission method in communication system based on the cross-layered system that reflect the information of encoded video data. Selective retransmission method which consider the characteristics of video data improves the performance of video streaming services. We verified the proposed method with raw format full HD test sequence with H.264/AVC codec and MATLAB simulation. The simulation results show that the proposed method improves about 10% PSNR performance.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.38-41
• /
• 2014

Due to the diversity of device performances and the possibility of providing multimedia service through many networks, media consumption environment has been changed in various ways. In recent, mobile services and broadcasting services started to provided through IP network. According to this flow changes, there was great demand for various multimedia services through heterogenous networks. To solve this problem, MMT was suggested as a standard of multimedia transport which replaces MPEG-2 TS(Transport Stream) which is used for HD(High Definition) transport. MMT can be provided various broadcasting based on IP through terrestrial, satellite, cable broadcasting networks, and also deliver multimedia through many networks at the same time. MMT was risen as a method of servicing UHD broadcasting. In this paper, we present an implementation of service architecture for hierarchical UHD broadcasting over heterogenous networks using MMT.