• Journal of Electrochemical Science and Technology
• /
• 제9권4호
• /
• pp.260-275
• /
• 2018

The corrosion inhibition of cast iron in 1 M HCl by Phenanthroline (Phen) was investigated using potentiodynamic polarization (PDP) curves, electrochemical impedance spectroscopy (EIS), surface analysis and theoretical calculations. It is found that Phen exhibits high inhibition activity towards the corrosive action of HCl and its adsorption obeys the Langmuir adsorption isotherm model. The results showed that inhibition efficiency increases with Phen concentration up to a maximum value of 96% at 1.4 mM, and decreases slightly with the increase in temperature. The free adsorption energy value indicates that Phen adsorbs on cast iron surface in 1 M HCl via a simultaneous physisorption and chemisorption mechanism. Scanning electron microscopy (SEM) micrographs, atomic force microscopy (AFM) and FTIR analysis confirmed the formation of a protective film on cast iron surface, resulting in the improvement of its corrosion resistance in the studied aggressive solution. Quantum chemical calculations at the DFT level were achieved to correlate electronic structure parameters of Phen molecules with their adsorption mode.

• 분석과학
• /
• 제10권1호
• /
• pp.53-59
• /
• 1997

$Cl^-$형 음이온 교환수지에서 희토류-EDTA 용리액을 사용하여 희토류 원소 혼합물 중의 원하는 한 원소를 분리 회수하는 연구를 하였다. 음이온 교환수지에 $Sm^{3+}$, $La^{3+}$, $Ce^{4+}$의 EDTA-착물을 흡착시키고, Sm-EDTA 용액으로 용리시키면, 수지에 흡착된 희토류 원소 중 $Sm^{3+}$ 외의 희토류 원소는 용리된다. 수지에 남아 있는 $Sm^{3+}$는 단계적으로 1M HCl 용액으로 용리시켜 분리하였다. Sm-EDTA 용액 대신 La-EDTA 용액으로 용리시키면 $Sm^{3+}$과 $Ce^{4+}$이 $La^{3+}$과 같이 용리되어 완전한 분리가 되지 않았고, Ce-EDTA 용액으로 용리시킬 때도 분리가 불가능하였다. Sm-EDTA 용액으로 용리시킬 때 용리 구조는 다음과 같다. 흡착과정 : $RCl+Ln-Y^-{\leftrightarrows}RLnY+Cl^-$, Sm-EDTA 용리 : $RLnY+Sm-Y^-{\leftrightarrows}RSmY+Ln-Y^-$, HCl 용리 : $RSmY+HCl{\leftrightarrows}RCl+Sm-Y^-$.

• 한국임상수의학회지
• /
• 제14권2호
• /
• pp.195-200
• /
• 1997

In order to compare the pharmacokinetic profiles of enrofloxacin-HCL)ENFLX-HCL) and enrofloxacin-KOH (ENFLX-KOH) after oral administration in broiler chickens, the study was performed. The chickens used in this study weighed $1.82 {\pm}0.2 kg$ and clinically healthy. The dose of intravenous and lral administration was 5 mg per kg of body weight as enrofloxacin. After intravenous injection of enrofloxacin, it showed two-compartment model with the rapid distribution phase and the slow elimination phase. The mean apparent volume of distribution (Vd) was 2.70 l/kg. The mean half-life of elimination and distribution showed 8.26 h and 0.44 h, respectively. The mean area under curve (AUC) was calculated as $19.7 {\mu} g{\cdot} h/ml$. After oral administration of ENFLX-HCL and ENFLX-KOH with a rate of dose 5 mg of enrofloxacin/kg of body weight, Both of the products were showed one-compartment model unlike that of i.v. enrofloxacin standard solution showed the mean bioavailability of 79.64% for the ENFLX-KOG and 86.24% for the ENFLX-HCL. The mean total body clearance of the former was 0.24 l/kg/h and the latter 0.42 l/kg/h. Both enorfloxacin formulations seemed to have good tissue distribution and penetration as indicated by large volume of distribution : 2.72 l/kg for the -KOH and 4.44 l/kg for the -HCL. With the results obtained in this study, ENFLX-HCL could be used in place of its salt form in chickens.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1401-1413
• /
• 1994

The synthesis of kaolinite mineral from domestic diatomite for silica resource, commercial vailable gibbsite or alumina for alumina resource were made under various hydrothermal treatment, and the sythetic effect of acidic mineralizers, temperature treatment with time duration, particle size of alumina on formation of kaolinite mineral and the plastic properties of synthesized kaolinite were investigated. The various acidic mineralizers which are HCl, HNO3, H2SO4 and Oxalic acid were employed for hydrothermal reaction in the range of 0.01 mol/ι to 2 mol/ι concentration of each mineralizers. It was found that HCl in the level of 1 mol/ι solution produced highly yields of well-crystallized and platy form kaolinite mineral and gave the most effective extraction of iron oxide, compared to that of others, that HNO3 produced highly yield of kaolinite but lower extraction of iron oxide, that H2SO4 produced low yield of kaolinite and formed alunite mineral, and that oxialic acid formed spherical crystalline kaolinite and gave low extraction of iron oxide. Moreover, it showed that kaolinite minerals were well synthesized in a wide range of less than 2 mol/ι acids, but were poorly synthesized at more than 2 mol/ι acids. However, boehmite and kaolinite were coexistently formed in the temperature range of 18$0^{\circ}C$ and 20$0^{\circ}C$ when the calcined diatomite and gibbsite were involved. The well-ordered kaolinite mineral as a platy form was highly synthesized in the temperature range of 220 and 24$0^{\circ}C$, when the same marterials as above were used with treatment of 1 mol/ι HCl solution. The results also revealed that the size of crystalline platy form kaolinite, synthesized from alumina and calcined diatomite with treatment in 1 mol/ιHCl solution at 24$0^{\circ}C$, was much larger than that of gibbsite and calcined diatomite shown previously, and that kaolinite and corundum minerals were coexistently formed under any hydrothermal treatment conditions. The plasticity of synthesized kaolinite from under 2 ${\mu}{\textrm}{m}$ alumina and calcined diatomite was very poor, and that of the synthesized kaolinite from raw diatomite and gibbsite gave higher than that of calcined diatomite and gibbsite.

• 한국광물학회지
• /
• 제9권2호
• /
• pp.71-81
• /
• 1996

Dissolution experiments were conducted to understand chemical nature of weathering of anorthosite from the Hadong area. Anorthosite and plagioclase from it were reacted with HCl or KOH solutions under various conditions concerning such as grain size, initial pH of solutions, and shaking Average composition of plagioclase used in the experiment was Na0.32Ca0.71Al1.71Si2.28O8.Under acidic conditions, solution pH increases rapidly in the initial stage and then gradually to reach palteau. Shaking agitates the reaction rate in the initial stage but does not affect after the system reached steady state. Ca and si concentrations show rapid increase and then gradual increase. Al concentration increases rapidly in the early stage and then decreases. Later decrease was interpreted as the precipitation of an Al-bearing material. Different dissolution rates of different constituents of plagioclase together the with precipitation of al-bearing material might be responsible for the non-stoichiometric dissolution of plagioclase.X-ray diffraction analyses on anorthosite before and after dissolution experiment show dissolution rates differ with different lattice planes of plagioclase. It suggests the crystallographic control on dissolution reaction. X-ray photoelectron spectroscopic result shows that the average composition of plagioclase surface reacted with HCL of initial pH 1.97 for 2000 hours is Na0.20Ca0.26Al1.7Si2.3O8. It means that Na- and Ca-depleted H-feldspar is developed without Al-depleted layer on the surface of plagioclase by reaction with HCl and that dissolution reaction takes place sparsely on the surface of plagioclase. Al and Si are dissolved preferentially over Ca from anorthosite powder in KHO solution. Reaction of acid-reacted anorthosite with KOH solution shows the same Si dissolution behavior as in the fresh anorthosite. This indicates that the Al-depleted and Si-enriched layer does not build up on the acid-reacted surface.

• 폴리머
• /
• 제26권4호
• /
• pp.468-476
• /
• 2002

순수한 PAN 섬유의 예비산화와 가수분해의 과정을 통하여 제조된 oxy-PAN은 염기와 산용액에 담그었을 때 신장과 수축 거동을 보임이 알려져 있다. 본 연구에서는, 염기 (NaOH) 용매에서 약 30%의 신장과 산 (HCl) 용매에서 30∼50%의 수축 거동을 관찰하였다. 기계적 특성에 대한 실험에서, oxy-PAN 섬유가 수축되었을 때 향상된 기계적 특성을 나타내었다. 이러한 거동과 기계적 특성은 인체의 근육과 선형 구동체의 그것들과 유사하였다. NaOH와 HCl 용액에서 oxy-PAN 섬유의 길이가 변화하는 중요한 요인으로는 친수화 또는 소수화 구조의 전환에 의한 영향이다. 다른 요인으로는 oxy-PAN 섬유와 용액간의 이온과 물의 교환, 이온의 농도차에 의한 삼투압 등이 영향을 준다. Oxy-PAN 섬유의 신장 및 수축과 기계적 특성에 영향을 미치는 여러 가지 요인들을 규명하기 위한 보다 많은 연구가 필요하지만, 본 연구실에서 제조된 oxy-PAN 섬유가 인공 근육 및 선형 구동체로 적용될 수 있는 충분한 가능성이 있음을 제시한다.

• 자원리싸이클링
• /
• 제22권5호
• /
• pp.29-34
• /
• 2013

TEHA와TEHA 및TBP와 LIX63과의 혼합용매를 사용하여 염산용액으로부터 백금과 로듐을 분리하기 위한 용맥추출실험을 수행하였다. 염산농도 1-9 M 범위에서 추출제의 농도에 따른 두 금속의 추출거동과 분리 가능성을 조사하였다. 혼합용액에서 백금과 로듐의 농도는 각각 $1{\times}10^{-3}M$과 $2{\times}10^{-4}M$로 조절하였다. TEHA와 혼합추출제에 의한 추출시 로듐의 추출율은 추출조건에 의존하나, 백금은 염산농도와 무관하게 모두 추출되었다. 혼합용액에서 염산농도가 낮을 경우 로듐이 추출되지 않아 백금과 로듐의 분리가 가능하였다. LIX63을 첨가한 TEHA는 로듐의 추출율을 향상시켰으나, TBP를 첨가한 TEHA는 두 금속의 추출에 거의 영향을 미치지 않았다.

• 자원리싸이클링
• /
• 제30권2호
• /
• pp.24-30
• /
• 2021

폐인쇄회로기판으로부터 부품을 분리하기 위하여 4가 주석이온 (Sn4+)을 포함한 염산용액을 이용하여 탈착실험을 진행하고, 부품탈착에 대한 교반속도, 반응온도, 4가 주석이온농도, 염산용액농도의 영향을 조사하였다. 100 rpm~300 rpm의 교반속도에서 PCB로부터 부품의 탈착속도는 큰 차이가 없었으며, 반응온도, 4가 주석이온농도, 그리고 염산용액농도를 증가시킴에 따라 탈착속도도 증가하였다. 모든 부품 탈착실험에서 탈착율이 100%에 도달하였을 때 기판에서 솔더는 관찰되지 않았으며 주석농도는 약 1,500 mg/L였다. 10,000 mg/L의 4가 주석이온을 포함한 1 mol/L의 염산용액에 폐하드디스크 PCB 1개를 투입하고, 교반속도와 반응온도를 각각 200 rpm과 90 ℃로 조정한 탈착실험에서 PCB로부터 부품의 탈착은 2시간만에 100% 완료되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제20권1호
• /
• pp.23-27
• /
• 1992

81.9% of the cellulose delignified by acetosolv process was hydrolyzed in HCl-$AlCl_3$ hydrolysis system when $AlCl_3$ was used as catalyst in breaking down of glycosidic bond of cellulose. It was well compared that the HCl hydrolysis system without $AlCl_3$ as catalyst showed only 60~61% of the hydrolyzed yield. Also monosaccharide yield including glucose clearly increased when $AlCl_3$ was use. When concentration of HCl and $AlCl_3$ was increased, the hydrolyzed monosaccharide was increased within certain range. The monosaccharid yield out of the hydrolyzed reached 55.4% at optimum conditions which were identified as 20% of Hel solution, 0.03 Mol of $AlCl_3$, $120^{\circ}C$ of reaction temperature and 7 hours of reaction time employed in this study.

• 대한금속재료학회지
• /
• 제47권6호
• /
• pp.349-355
• /
• 2009

In the solvent extraction of Ru(IV) with Alamine336, it was found that Ru took part in the reaction as $RuCl_{6}_^{2-}$ in the HCl concentration range of 1 to 5 M. Interaction parameter between hydrogen ion and $RuCl_{6}_^{2-}$ was estimated by applying Bromley equation to the extraction data. From the mixed solutions of Pd(II) and Ru(IV), the distribution coefficients of Pd were found to be higher than those of Ru in the experimental ranges. Separation factor between Pd and Ru rapidly increased with the decrease of Alamine336 concentration. About 60% of the Ru from the mixed solutions was extracted by TBP at 8.3 M HCl, while Pd was not extracted in the HCl concentration range of 1.6 to 8.3 M.