• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.580-584
• /
• 2005

One of the problems of panoramic image stitching methods is that its computational cost is so high that the image processing required usually cannot be done in real-time. Real-time performance is important in applications such as video surveillance becausewe must see current scenes. But it takes more than several seconds to calculate transform coefficients between images. Panoramic VR technologies such as Apple QuickTime VR have problem that distorts images of top and bottom. This paper presents a fast stitching method and a methpd reducing distortions of top and bottom in cubic panoramic image.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.2
• /
• pp.223-231
• /
• 1986

During the past decade, the Quick Tool-Life Testing Method has been studied. However, a generalized theory and testing method for the quantitative measurement of tool wear have not been developed yet. Among many factors to affect the tool wear, the flank wear is regarded as a main factor. In this study, the behavior of the flank wear for carbide tool was studied as a preceding step to present a simple method for Quick Tool-Life Testing, and it was found that the flank wear varies in direct proportion to cutting time, and the following general equation is obtained for the flank wear curves with respect to cutting time and velociety.

• Journal of Korean Academy of Dental Administration
• /
• v.11 no.1
• /
• pp.38-46
• /
• 2023

Composite resins, commonly used in clinical practice, have been developed to improve aesthetics to obtain smooth surfaces. Although the restored composite resin has a smooth surface, it gradually becomes rough over time. Therefore, this study measured glossiness to evaluate the surface of various composite resins and attempted to evaluate the maintenance of glossiness of composite resins by observing surfaces that change to roughness. Specimens were produced using resin used in clinical practice: Gradia direct anterior (GA), Tetric N-Ceram (TN), Ceram.X Sphere TEC one (CX), Filtek Z350XT (FT), Estelite sigma quick (ES). After creating a smooth surface with slide glass, five locations were randomly selected to measure surface gloss, and the average was the representative value of the specimen. Roughness was applied to the specimen under water pouring at the same speed and pressure using SiC paper #2400, 1200, and 400. The gloss unit of different SiC papers was measured. To evaluate the gloss unit and gloss retention between composite resins, one-way analysis of variance and Tukey multiple comparisons test were used. As a result of the study, there was a difference in gloss unit of specimens produced under the same conditions. Although the degree differed depending on the composite resin, there was also a difference in gloss retention. Based on the findings, composite resins show differences in gloss due to their different characteristics. Ceram.X Sphere TEC one (CX) showing the lowest gloss retention and Estelite sigma quick (ES) showing the highest.

• Journal of the Korean Statistical Society
• /
• v.8 no.2
• /
• pp.139-163
• /
• 1979

Utilization of the aggregation concept applied in economics has been a traditional way of describing the state of an economic system and of predicting the future economic conditions. In addition, certain aggregate variables have also played a crucial role as indicators of the business cycle. Quick examples would be the price index, the productivity changes, the industrial production index, GNP, and so on. The methods of aggregation could be either simple summations, like GNP, or sophisticated weighted average, like the price index.

• 한국환경농학회:학술대회논문집
• /
• 2009.07a
• /
• pp.157-168
• /
• 2009

Frequent outbreaks of foodborne illness have been increasing the awareness of agro-food safety. Conventional methods for pathogen detection and identification are labor.intensive and take days to complete. The increasing use of rapid food safety testing is receiving more and more attention. The major reason for this trend is that the food industry requires quick and accurate results. The rapid detection of contaminants in food is critical for ensuring the safety of consumers. Recent advances in technology make detection and identification faster, more sensitive and more specific than traditional method. In this paper, technology trends and recent developments in rapid methods for agro-food safety are discussed.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.563-566
• /
• 2000

Sampling rate conversion widely used in subband coding, A/D and D/A transitions etc. is an important techniques Nyquist filters and the filter banks have been used for the sampling converter. However, they need many memories and, whenever the sampling rate is changed, it is necessary to design filters. So the objective of this paper is to present a new kernel that is quick to evaluate and has a good stopband performance.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.11a
• /
• pp.333-351
• /
• 2000

In this paper, for DBR scheduler development I have designed prototype by using methodology and gave you some research about system integration to apply DBR sch onto the plan establishment phase of SNS system. DBR manage the constraints and the working speed of each product resource t frequently and today its role is tend to be much expanded by inserting mode information system such as MRPⅡ, ERP and SCM. So in this paper I have analyzed designed the business and inner processor for DBR scheduler development then on t of the analyzed data I have developed the simulator And moreover I will suggest method to insert it into SNS system modules. For system development I have used Delphi 4.0, Microsoft Access(DBMS) and QuickR for making report such as ordering, working directions, progress chart and inventor

• Journal of Radiation Protection and Research
• /
• v.41 no.2
• /
• pp.87-91
• /
• 2016

Background: A hand-held detector for an emergency response was developed for nuclide identification and to estimate the information of the ambient dose rate in the scene of an accident as well as the radioactivity of the contaminants. Materials and Methods: To achieve this, the most suitable sensor was first selected as a cadmium zinc telluride (CZT) semiconductor and the signal processing unit from a sensor and the signal discrimination and storage unit were successfully manufactured on a printed circuit board. Results and Discussion: The performance of the developed signal processing unit was then evaluated to have an energy resolution of about 14 keV at 662 keV. The system control unit was also designed to operate the CZT detector, monitor the detector, battery, and interface status, and check and transmit the measured results of the ambient dose rate and radioactivity. In addition, a collimator, which can control the inner radius, and the airborne dust sampler, which consists of an air filter and charcoal filter, were developed and mounted to the developed CZT detector for the quick and efficient response of a nuclear accident. Conclusion: The hand-held CZT detector was developed to make the in-situ gamma-ray spectrometry and its performance was checked to have a good energy resolution. In addition, the collimator and the airborne dust sampler were developed and mounted to the developed CZT detector for a quick and efficient response to a nuclear accident.

• Journal of Acupuncture Research
• /
• v.19 no.2
• /
• pp.149-163
• /
• 2002

Objective : We have studied literatures of Renying Qi mouth comparison pulse diagnosis theory and distinguished the excess, deficiency and quick-temper of pulse as the measurement parameter of Renying Qi mouth pulse diagnosis. Methods : We have acquired pulse signals of Renying Qi mouth by using diagnostic equipment of Renying Qi mouth pulsation and estimated reappearance of pulse signals. Results : 1. The measurement parameter of Renying Qi mouth pulse diagnosis distinguishes the excess, deficiency and quick-temper of pulse through relative comparison of Renying Qi mouth. 2. When we acquired the pulse singals of Renying Qi mouth by using diagnostic equipment, the property, measuring area, bias pressure, contact or adhesion state of the sensor are considered. 3. As getting the pulse signal of Renying Qi mouth, the sensor of a sound detective mode is effective. 4. The diagnostic equipment of Renying Qi mouth pulse is assessed as being significant reappearance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.664-665
• /
• 2016

This paper proposes an identification system based on QR (Quick Response) code for production and disposal information of Internet of Things (IoT) devices. Three thousands and five hundreds of electronic devices have replaced and discarded in South Korea in a year, and twenty millions to fifty millions tons of e-wastes have happened throughout the world every year. According to Gartner, market research institution, the number of IoT devices will increase from 2.3 billions in 2013 to 30 billions in 2020, however, the regulations and systems which take into account environment were not prepared. The identification systems for reflecting information of devices, which are produced or discarded, are required to resolve the problem. The proposed identification system based on QR code can store much more massive data such as the producer, product's model, serial number, recycling rate, recovering rate, recyclability rate, recoverability rate than RFID (Radio-Frequency Identification). Also, users can immediately recognize production and disposal information by a QR code application in a smartphone.