• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.423-429
• /
• 2016

A study was conducted to analyze the oil spill dynamic state using system dynamics method, and to developed regional risk program based on oil spill history for better judgement of the situation at the early stage of oil spill. Results were obtained as follows: Firstly, various variables were calculated by a score based on raw data of oil spill history in Korea. Regional oil spill risk was also calculated in a quantitative way. Secondly, calculated regional oil spill risk was analyzed and programmed with a help of smart-device for better use. Thirdly, comparison of oil spill risk between regions became possible and regional oil spill risk program proved to be useful in prompt decision under urgent situation in response to oil spill at sea. Convenient and quick oil spill risk without special restrictions have been able to determine. and it can help in anticipative preparation (strategy) for oil spills.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.203-210
• /
• 2014

This study proposes adaptive decision making method having feed-back structure of regression and simulation models to support the quick decision making of production managers by managing and integrating the mutual relationship among historical data. For that, from historical data that have extracted and accumulated from each process, we first selected major constraint resources that are used as independent variables in regression model. The regression model is designed by using the dependent variables (objectives) that defined above by managers and independent variables selected in previous step and simulation model that are composed of constraint resources is designed. In process of simulation run, we obtain the multiple feasible solutions (alternatives) by using meta-heuristic method. Each solution is substituted by regression equation and we found the optimal solution that is minimum of difference between values obtained by regression model and simulation results. The optimal solution is delivered and incorporated to production site and current operation results from production site is used to generate new regression model after that time.

• Archives of Plastic Surgery
• /
• v.39 no.5
• /
• pp.534-539
• /
• 2012

Background Autologous fat grafting evolved over the twentieth century to become a quick, safe, and reliable method for restoring volume. However, autologous fat grafts have some problems including uncertain viability of the grafted fat and a low rate of graft survival. To overcome the problems associated with autologous fat grafts, we used uncultured adipose tissue-derived stromal cell (stromal vascular fraction, SVF) assisted autologous fat grafting. Thus, the purpose of this study was to evaluate the effect of SVF in a clinical trial. Methods SVF cells were freshly isolated from half of the aspirated fat and were used in combination with the other half of the aspirated fat during the procedure. Between March 2007 and February 2008, a total of 9 SVF-assisted fat grafts were performed in 9 patients. The patients were followed for 12 weeks after treatment. Data collected at each follow-up visit included clinical examination of the graft site(s), photographs for historical comparison, and information from a patient questionnaire that measured the outcomes from the patient perspective. The photographs were evaluated by medical professionals. Results Scores of the left facial area grafted with adipose tissue mixed with SVF cells were significantly higher compared with those of the right facial area grafted with adipose tissue without SVF cells. There was no significant adverse effect. Conclusions The subjective patient satisfaction survey and surgeon survey showed that SVF-assisted fat grafting was a surgical procedure with superior results.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.91-98
• /
• 2011

This study is about fire resistance performance of wood framed lightweight wall including a middle lintel as a traditional wall form in Korea. The target wall is non-loadbearing system which constructed with $38{\times}89$ mm ($2"{\times}4"$) wood frame and fireproof gypsum board covering, including a middle lintel made of $150{\times}150$ mm section glue-laminated timber. As a test results, all specimens have showed fire resistant performance over 90 minutes and tests were maintained until flame occuring on Specimen-l, 2, 3 at 91 min, 97 min and 98 min respectively. Fire resistance of the heat side gypsum board was 45 minutes and charring rate of middle lintel was equivalant with that of usual timber. The wood stud inside wall system showed relatively quick combution characteristic when exposed to high temperature with no temperature rising delaying time caused by moisture evaporation because of the dehydration preceded during the early period of fire side gypsum board resist to heat.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.2
• /
• pp.147-154
• /
• 2007

This paper describes a 'gyro-mouse', which provides a new human-computer interface (HCI) for persons who are disabled in their upper extremities, for handling the mouse-click and mouse-move function. We adopted the artificial neural network to recognize a quick-nodding pattern of the disabled person as the gyro-mouse click. The performance of our gyro-mouse was evaluated by three indices that include 'click recognition rate', 'error in cursor position control', and 'click rate per minute' on a target box appearing at random positions. Although it turned out that the average error in cursor positioning control was 1.4-1.5 times larger than that of optical mouse control, and the average click rate per minute was 40% of the optical mouse, the overall click recognition rate was 93%. Moreover, the click rate per minute increased from 35.2% to 44% with repetitive trials. Hence, our suggested gyro-mouse system can be used to provide a new user interface tool especially for those persons who do not have full use of their upper extremities.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.4
• /
• pp.357-364
• /
• 2016

Recently, the world faces the environmental problem such as air pollution due to harmful gas discharged from car and abnormal climate due to the green-house gases increased by the discharge of $CO_2$. Compressed Natural Gas (CNG), one of alternative for this problem, is less harmful, compared to the existing fossil fuel, as gaseous fuel, and less carbon in fuel ingredients and carbon dioxide generation rate relatively favorable more than the existing fuel. However, CNG fuel has the weakness of slow flame propagation speed and difficult fast burn. On the other hand, hydrogen does not include carbon in fuel ingredients, and does not discharge harmful gas such as CO and HC. Moreover, it has strength of quick burning velocity and ignition is possible with small ignition energy source and it's has wide Lean Flammability Limit. If using this hydrogen with CNG fuel, the characteristics of output and discharge gas is improved by the mixer's burning velocity improved, and, at the same time, is possible to have stable lean combustion with the reduction of $CO_2$ expected. Therefore, this research tries to identify the characteristics of engine and emission gas when mixing CNG fuel and hydrogen in each portion and burning them in spark igniting engine, and grasp the combustion stability and emission gas characteristics according and use it as the basic data of hydrogen-CNG premixed engine.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.1129-1133
• /
• 2015

Background: The tissue microarray (TMA) is widely accepted as a fast and cost-effective research tool for in situ tissue analysis in modern pathology. However, the current automated and manual TMA techniques have some drawbacks restricting their productivity. Our study aimed to introduce an improved manual tissue miniarray (TmA) technique that is simple and readily applicable to a broad range of tissue samples. Materials and Methods: In this study, a conventional TV/radio telescopic antenna was used to punch tissue cores manually from donor paraffin embedded tissue blocks which were pre-incubated at $40^{\circ}C$. The cores were manually transferred, organized and attached to a standard block mould, and filled with liquid paraffin to construct TmA blocks without any use of recipient paraffin blocks. Results: By using a conventional TV/radio antenna, it was possible to construct TmA paraffin blocks with variable formats of array size and number ($2-mm{\times}42$, $2.5-mm{\times}30$, $3-mm{\times}24$, $4-mm{\times}20$ and $5-mm{\times}12$ cores). Up to $2-mm{\times}84$ cores could be mounted and stained on a standard microscopic slide by cutting two sections from two different blocks and mounting them beside each other. The technique was simple and caused minimal damage to the donor blocks. H&E and immunostained slides showed well-defined tissue morphology and array configuration. Conclusions: This technique is easy to reproduce, quick, inexpensive and creates uniform blocks with abundant tissues without specialized equipment. It was found to improve the stability of the cores within the paraffin block and facilitated no losses during cutting and immunostaining.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.6
• /
• pp.833-838
• /
• 2015

To develop a value-added product from individually quick-frozen oyster Crassostrea gigas extract (IQFOE), we prepared two types of oyster sauce (OS): bottled OS (BOS) and retort pouched OS (ROS). We investigated processing conditions, quality metrics and flavor compounds in each type of sauce. We found that the most appropriate base formular for both BOS and ROS consisted of 40.0% IQFOE (Brix $30^{\circ}$), 15.0% sugar, 6.0% salt, 4.0% monosodium glutamate, 4.0% soy sauce, 3.5% starch, 3.0% yeast extract, 3.5% wheat flour and 21.0% water. The crude protein, salinity and amino-nitrogen contents of the BOS and ROS were 8.2 and 8.3%, 9.3 and 9.2%, and 539.2 and 535.2 mg/100 g, respectively. In commercial oyster sauces (COS), these values were 4.7-6.5%, 9.7-12.0%, and 244.7-504.2 mg/100 g, respectively. The total free amino acids content of ROS was 7,346.9 mg/100 g, and the main free amino acids were glutamic acid, taurine, proline, glycine and alanine. The inosinic monophosphate (IMP) content of the ROS was 131.6 mg/100 g, and the primary inorganic ions were Na, K, S and P. The present BOS and ROS have favorable organoleptic qualities and storage stability compared with COS, and are suitable for commercialization as high-flavor seasoning sauces.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.4961-4964
• /
• 2013

Greater use of mobile phone devices seems inevitable because the health industry and cancer care are facing challenges such as resource constraints, rising care costs, the need for immediate access to healthcare data of types such as audio video texts for early detection and treatment of patients and increasing remote aids in telemedicine. Physicians, in order to study the causes of cancer, detect cancer earlier, act in prevention measures, determine the effectiveness of treatment and specify the reasons for the treatment ineffectiveness, need to access accurate, comprehensive and timely cancer data. Mobile devices provide opportunities and can play an important role in consulting, diagnosis, treatment, and quick access to health information. There easy carriage make them perfect tools for healthcare providers in cancer care management. Key factors in cancer care management systems through a mobile phone health approach must be considered such as human resources, confidentiality and privacy, legal and ethical issues, appropriate ICT and provider infrastructure and costs in general aspects and interoperability, human relationships, types of mobile devices and telecommunication related points in specific aspects. The successful implementation of mobile-based systems in cancer care management will constantly face many challenges. Hence, in applying mobile cancer care, involvement of users and considering their needs in all phases of project, providing adequate bandwidth, preparation of standard tools that provide maximum mobility and flexibility for users, decreasing obstacles to interrupt network communications, and using suitable communication protocols are essential. It is obvious that identifying and reducing barriers and strengthening the positive points will have a significant role in appropriate planning and promoting the achievements of mobile cancer care systems. The aim of this article is to explain key points which should be considered in designing appropriate mobile health systems in cancer care as an approach for improving cancer care management.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1957-1963
• /
• 2017

This paper has proposed a new-type groundwater auto-monitoring system based on Multi-Sensor Device. The system adopted Multi-Sensor Device as host computer of data acquisition, used Windows Mobile which was prevalent operation system of Multi-Sensor Device. It adopted serial port CAN and RS485 as the communication interface between goundwater sensor Device and monitor host machine and utilized serial-linked multi-sensor design to measure effectively according to the depth of groundwater. We present a design for a groundwater monitoring system based on a network of wirelessly linked sensors. The proposed solution will enable groundwater researchers and decision makers to have quick access to the groundwater data with less effort and cost. Though our design is initially meant for groundwater monitoring, it can be easily adapted to other fields of environmental monitoring.