• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.335-341
• /
• 2020

본 연구의 목적은 shear bond strength을 이용하여 pressed lithium disilicate 전장도재와 zirconia core의 접착을 비교 분석하는 것이다. Zirconia blank(Zirtooth, HASS, Gangneung, Korea)에 각 pressed ceramic(IPS e.max Zirpress, Vita PM9, GC Initial IQ, HASS Rosetta UP)이 적용된 시편을 제작하였다(N=40). 전단결합강도를 비교 평가하기 위해 The Schmitz-Schulmeyer test method을 이용하였고 산출된 파괴하중의 값을 분석했다. 산출된 네 가지 전단결합강도 값들 간의 평균 비교는 일원분산분석(one-way ANOVA)을 통해 이루어졌고, Tukey의 사후검정을 실시하여 서로 간의 평균 차이가 통계적으로 유의함을 검증하였다. 또 파절면의 3D 분석을 통하여 파괴 표면을 관찰하여, 그 파괴 양상도 분류하였다. 실험군별 전단결합강도는 IPS e.max Zirpress 16.69±3.11MPa, VITA PM9 14.21±3.63MPa, GC Initial IQ 11.17±2.92MPa, HASS Rosetta SM 27.90±5.71MPa이었으며, Lithium disilicate ceramic veneer(HASS Rosetta SM)의 결합 강도는 다른 제품들보다 통계적으로 유의하게 높았다(p<0.05). 또, 파괴면의 유형 분류 결과, 모든 시편에서 cohesive 파괴는 관찰되지 않았고 주로 adhesive와 cohesive가 같이 조합된 파괴 유형이 관찰되었다. 본 연구 결과에 의해서 pressed lithium disilicate 전장도재가 기존의 pressed to zirconia system보다 나은 접착력을 보여주었다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 춘계학술대회
• /
• pp.489-499
• /
• 2009

Through the process of HALT (Highly Accelerated Life Test) between 2003 to 2008, we are about to research on the design method for minimum test for all error modes that are classified and analyzed to obtain more margin able product.

• 한국세라믹학회지
• /
• 제48권4호
• /
• pp.269-277
• /
• 2011

Glass-ceramics based on lithium disilicate($Li_2Si_2O_5$) are prepared by heat-treatment of glasses in a system of $SiO_2-Li_2O-K_2O-Al_2O_3$ with different compositions. The crystallization heat-treatment was conducted at the temperature range of $700{\sim}900^{\circ}C$ and samples were analyzed by XRD and SEM. Mechanical properties were determined by a Vicker's hardness and 4 point bending strength. When $SiO_2/Li_2O$ ratio increased, cristobalite and tridymite crystals showed more predominate than lithium disilicate crystals. Increase in $Al_2O_3$ contents in the glass suppressed crystallzation of lithium disilicate crystals. Increase in ZnO, $B_2O_3$ contents in the glass decreased crystallization temperature of lithium disilicate crystals, and increased mechanical properties because of the reduction of the lithium disilicate crystal size.

• 한국전기전자재료학회논문지
• /
• 제23권5호
• /
• pp.358-363
• /
• 2010

The polishing pad is important element for polishing characteristic such as material removal rate(MRR) and within wafer non-uniformity(WIWNU) in the chemical mechanical planarization(CMP). The result of the viscoelasticity measurement shows that 1st elastic modulus is increased and 2nd elastic modulus is decreased when the top pad is thickened. The finite element analysis(FEA) was conducted to predict characteristic of polishing behavior according to the pad thickness. The result of polishing experiment was similar with the FEA, and it shows that the 1st elastic modulus affects instantaneous deformation of pad related to MRR. And the 2nd elastic modulus has an effect on WIWNU due to the viscoelasticity deformation of pad.

• Food Science and Biotechnology
• /
• 제27권6호
• /
• pp.1871-1875
• /
• 2018

Preventive and curative activity of postharvest treatments with chitosan nanoparticles (CS) and chitosan biocomposites loaded with pepper tree essential oil (CS-PEO) against anthracnose were evaluated on Avocado (Persea americana) cv. Hass artificially inoculated in rind wounds. After 10 days of storage significant preventive and curative activity against Colletotrichum gloeosporioides was observed with the absence of internal damage by applying CS and CS-PEO. Quality parameters like water losses and firmness changes were assessed on fruit treated. CS and CS-PEO were effective to reduce water losses and firmness losses.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.9-35
• /
• 2004

Part Stress Analysis 적용의 취약점: 전자제품의 마진 향상 및 신뢰도 예측을 위해 적용됨. 기본적으로 경험 법칙을 사용한다. 최신 Data base가 충분하지 않으면 예측 신뢰도는 크게 저하된다.(중략)

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.283-289
• /
• 2011

Purpose: The purpose of this study was to evaluate flexural strength of full zirconia crown using block after clinical work. Methods: The three point bending test was used to measure the flexural strength of zirconia block. Statistical analysis was done using the Statistical Package for Social Sciences version 19.0 for Windows. As for the analysis methods, the study used analysis of variance, Tukey's test. Results: The ave Rage value of flexural strengths of WIELAND, Zirkonzahn, Hass, D-MAX were 516.2 MPa, 612.6MPa, 566.2MPa, 744.6MPa. The ave Rage value of Surface Roughness of WIELAND, Zirkonzahn, Hass, D-MAX were 0.39Ra, 0.33Ra, 0.33Ra, 0.47Ra. Conclusion: Flexural strength of zirconia block decreased after clinical work. Flexural strength of zirconia block is equal to or higher than flexural strength of dental metal, so zirconia block can be used as dental material.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.274-280
• /
• 2010

Through the process of HALT (Highly Accelerated Life Test) between 2003 to 2008, we are about to research on the design method for minimum test for all error modes that are classified and analyzed to obtain more margin able product.

• 약학회지
• /
• 제18권2호
• /
• pp.145-156
• /
• 1974

P, P'-Hexachiorobitolyl, p, p-hexachlorobitolylketone and p, p' hexachlorobitolylthiourea were synthesized by the radical chlorination method of Hass and McBeer. Among these comppounds, l wormicidal activity of p.p'-hexachlorobitolythiourea was much most potent against Clonorchis sinensis than Hetol in vitro. In the process of the p, p'-biolyl chlorination, ${\alpha, \alpha, \alpha}$-trichlorobitolyl was not detected, but small amount of ${\alpha, \alpha, \alpha}$-dichlorobitolyl was detected. This compound was immediately converted bitolyl compounds were analyzed, linear relationship was observed between retention indices and number of chlorine in two series of odd and even numbered chlorine compounds.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.152.1-152.1
• /
• 2008