• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1066-1076
• /
• 2011

The subsystems of HSR train control system in each country has developed and operated till early 2000, however 2001/16/EC ERTMS is issued for inter-operability among European train control systems in 2001. So it is trend that ERTMS/ETCS has been applied to not only low-speed train system but high-speed train system over 300km/h in many countries of Europe. According to the government policies of the Honam HSR, metropolitan HSR and test lines, incoming on-board signal control system has been required caused by speed limit to 160km/h on the ground signal system. As ETCS-Level 1 system has applied in our railways from 2003, so our train control system has depended on foreign technologies. In this paper, we analyzed to localize train control system for being ready to protect foreign policies and obtaining core technologies of HSR train control system for instance ETCS-Level2.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.46-49
• /
• 2004

Switched Reluctance Motor(SRM) has been researched for its superior characteristics. The SRM drive system has simple mechanical and magnetic structure, and it requires simple power electronic drive circuit. It is to be compatible to wide range adjustable speed drive system because it has the same driving characteristics of DC series motor's, easy control principle and high efficiency characteristics. In this paper, 2 types of excitation strategy are researched. Conventional 1-phase excitation and 2-phase excitation method are compared and tested. Though 1-phase excitation method is robust and has high performance, 2-phase excitation method has some merit in appling power device. Some simulation and test results are foaled with some analysis.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.1
• /
• pp.15-22
• /
• 1999

In this paper, ferrite-rubber composite has been studied in order to apply to RF-A-PF in a super wideband electromagnetic absorber in RF-A-PF type, which can be used for a general purpose anechoic chamber. $Ni_x - Mn_0.1 - Zn_{(1-x-0.1)}ㆍFe_2O_4$ ferrite powder has been fabricated, then, using this, 〔$Ni_x - Mn_0.1 - Zn_{(1-x-0.1)}ㆍFe_2O_4$〕-Rubber composite for RF-layer in the RF-A-PF type absorber has been fabricated and it's characteristics have been analyzed. As a result, it has been clearly shown that the 〔$Ni_x - Mn_0.1 - Zn_{(1-x-0.1)}ㆍFe_2O_4$〕-Rubber composite has excellent electromagnetic wave absorbing properties.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.35-42
• /
• 1999

This paper describes the characteristics of the complex isotropic ferrite-rubber composite for a super wideband electromagnetic absorber in RP-A-PF type, which can be used for an anechoic chamber, wall material to prevent TV ghost, etc. The $Ni_x-A_{0.1}-ZN_{(1-x0.1)}$. $Fe{_2}O_4$ ferrite powder has been fabricated. Using this, then, [$Ni_x-A_{0.1}-ZN_{(1-x0.1)}$. $Fe{_2}O_4$]-Rubber composite for RF-layer in the RF-A-PF type absorber has been fabricated and it's characteristics has been analyzed. As a result, it has been shown that the [$Ni_x-A_{0.1}-ZN_{(1-x0.1)}$. $Fe{_2}O_4$].Rubber composite has excellent electromagnetic wave absorbing properties.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1502-1503
• /
• 2007

In this paper, inductive coupled LC balun has been desi gned and simulated for embedding into an organic packaging substrate. Inductive coupling method was applied to obtain wide band characteristics, and high dielectric film was utilized to reduce a size of the balun. The proposed balun has a novel scheme which consists of three embedded LC resonators with inductive coupling. This proposed balun has relatively small inductance and capacitance values which can be easily embedded into the organic packaging substrate. Furthermore, it has a good phase imbalance characteristic. The simulated results of proposed balun are an insertion loss of 1.2 dB, a return loss of 10 dB, a phase imbalance of 1 degree at frequency bandwidth of 750 MHz ranged from 1.8 GHz to 2.55 GHz, respectively. This balun has an area of $2mm{\tims}3.5mm{\times}0.66mm$ (height).

• Bulletin of the Korean Chemical Society
• /
• v.6 no.6
• /
• pp.369-374
• /
• 1985

A new flexible quadridentate ligand, N,N'-dimethylethylenediamine-N,N'-di-${\alpha}$-propionic acid (dmedpa) has been synthesized, and diammine and ethylenediamine cobalt(III) complexes of dmedpa, $[Co(dmedpa)(NH_3)_2]^+$ and $[Co(dmedpa(en)]^+,$ have been prepared. Only s-cis isomer has been yielede. A known N,N'-dimethylethylediamine-N,N'-diacetic acid (dmedda) has also been prepared. Dichloro cobalt(III) complexes of both dmedda and dmedpa have been prepared. Only the s-cis isomer has been yielded in the $[Co(dmedda)Cl_2]^-$ complex, while only the uns-cis isomer has been obtained for the $[Co(dmedpa)Cl_2]^-$ complex.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.2
• /
• pp.171-174
• /
• 1997

The initial kinetic energy of laser-ablated Zn cation has been investigated via time-of-flight mass spectrometry. The flight times of the ions have been measured with a high voltage pulse on the extract electrode in the mass spectrometer, which has been delayed from the laser pulse. The time-of-flight equation including the initial kinetic energy term of the ion has been derived for the mass spectrometer. The optimum value of the initial kinetic energy has been extracted by fitting the measured flight times into the time-of-flight equation. The initial kinetic energy of the ions generated by Nd:YAG laser (532 nm) at the power density of 5 × 107 W/cm2 has been determined to be 22-44 kJ/mol.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.254-254
• /
• 2016

Tin dioxide (SnO2) thin film is one of the most important n-type semiconducting materials having a high transparency and chemical stability. Due to their favorable properties, it has been widely used as a base materials in the transparent conducting substrates, gas sensors, and other various electronic applications. Up to now, SnO2 thin film has been extensively studied by a various deposition techniques such as RF magnetron sputtering, sol-gel process, a solution process, pulsed laser deposition (PLD), chemical vapor deposition (CVD), and atomic layer deposition (ALD) [1-6]. Among them, ALD or plasma-enhanced ALD (PEALD) has recently been focused in diverse applications due to its inherent capability for nanotechnologies. SnO2 thin films can be prepared by ALD or PEALD using halide precursors or using various metal-organic (MO) precursors. In the literature, there are many reports on the ALD and PEALD processes for depositing SnO2 thin films using MO precursors [7-8]. However, only ALD-SnO2 processes has been reported for halide precursors and PEALD-SnO2 process has not been reported yet. Herein, therefore, we report the first PEALD process of SnO2 thin films using SnCl4 and oxygen plasma. In this work, the growth kinetics of PEALD-SnO2 as well as their physical and chemical properties were systemically investigated. Moreover, some promising applications of this process will be shown at the end of presentation.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.505.2-506
• /
• 1986

L-Azetidine-2-carboxylic acid (A-2-C), a four-membered cyclic imino acid has been identified in certain plants, and the microorganism Actinoplanes ferrugineus. The imino acid A-2-C has a physiological significance as an antgaonist of proline during peptide synthesis. The biosynthetic mechanism for the formation of A-2-C has not been studied in any detail. By using various amino acids such as methionine and S-adenosyl-L-methionine labeled with deuterium or carbon-14, the details of the biosynthetic pathway and a possible mechanism for the formation of L-A-2-C in .4. ferrugineus have been unravelled, Both in vivo and in vitro experimental results suggest the biosynthesis of L-A-2-C is mediated by a confactor containing a carbonyl group, probably pyridoxal Phosphate. S-Adenosyl-L-methionine, which seems to be the direct biosynthetic substrate, has undergone a f-displacement by an ${\alpha}$-amino group of the amino acid portion of the substrate S-adenosyl-L-methionine potentially via a vinylglycine intermediate. The overall stereochemical events at the ${\beta}$-carbon of the substrate have been shown to inversion of configuration. The overall stereochemical events at the -position of the sub- strate have also been shown to occur with inversion of configuration. The ${\beta}$, ${\gamma}$-elimination reaction of the substrate seems to follow a cisoidal-type mechanism and the addition portion of the reaction a transoidal-type mechanism . The assignment of the proton NMR of A-2-C has been deduced by apply- ing NOE difference experiments, Gd(III) line-broadening experiments and 2D-NOESY experiments of regio-and stereospecificially deuterated A-2-C's.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.2
• /
• pp.57-62
• /
• 2000

The photocatalytic degradation of trichloroethylene(TCE) in water on various types of$TiO_2$ was studied. Surface properties of $TiO_2$were characterized by XRD, SEM, and BET in our previous work(23) . $TiO_2$from Aldrich has 100$\%$pure anatase, TiO$_2$from KIER has 100$\%$ pure rutile structure, and P25-TiO$_2$from Degussa has mixed structure of anatase(75$\%$) and rutile(25$\%$) . Firstly, optimum conditions for TCE degradation were examined in this study. Results showed that optimum loading amount of catalyst was 0.1 wt% and recirculation flow rate of mixture(distilled water and TCE) was 200 cc/min. Secondly, the effect of $TiO_2$structure on TCE degradation was examined. Results revealed that anatase structure generally has better photocatalytic activity than rutile structure. Especially, mixed structure(Degussa P25-$TiO_2$) has the highest activity due to small particle size and large specific surface area.