• Journal of Magnetics
• /
• v.1 no.2
• /
• pp.75-81
• /
• 1996

Study on the HDDr Characteristics of Nd16Fe76-xB8Zrx (x=0-2.0) Alloys and the Magnetic Properties of the HDDR Materials Nd16Fe76-xB8Zrx (where x=0-2.0) have been studied to see the effect of Zr addition on HDDR characteristics. A particular emphasis was place upon the anisotropy of the HDDR material. Anisotropy of the HDDR powder material has been evaluated by comparing the remanence values of the aligned sample measured along the aligning direction and the direction perpendicular to it. The HDDR characteristics of the alloys were investigated by means of DAT and TPA. Magnetic chracterisation of the HDDR processed materials was performed using a VSM and a TMA. The magnetic domain structure of the HDDR materials was examined by means of polarised microscope using a solid HDDR processed material. It has veen found that small addition (0.1 at %) of Zr to Nd-Fe-B-type alloy retards thedisproportionatio kinetics of the hydrogenated material. Desorption characteristic of the disproportionated materials has been found not to be affected significantly by the Zr addition. The Zr addition has been found to facilitate size of the powder. As the particle size decreases, the intrinsic coercivity decreases radically, and this is explained in terms of structural damage and/or oxidation caused during mechanical milling. It has also been found that the degree of alignment representing the anisotropic character of the HDDR powder is enhanced with decreasing particle size. Alloys with compositions based on

• Journal of Sport and Applied Science
• /
• v.2 no.2
• /
• pp.1-10
• /
• 2018

Prior literature has posited that the sport industry has been effective method to drive the economic growth. Given the rationale, this study sets China as a research object with a quarterly data from the first quarter of 2003 to the fourth quarter of 2017 to explore how the sport industry affects economic growth. This study employed Johansen cointegration test and dynamic ordinary least squares as methods for an empirical analysis. The input of sport industry, the labor input, the capital input, and the economic growth are used as research variables. The results show that there is a long-run relationship among them. Johansen cointegration test's estimation indicated that 1% increase in the input of sport industry will lead to 0.064% increase in economic growth. Dynamic ordinary least squares' estimation showed that whenever in the one lead, in the one lag and in the present period, the input of sport industry always poses a positive effect on economic growth. Labor input also has a positive effect on economic growth. The capital input has a negative effect on economic growth. Finally, even though the input of sport industry has a positive effect on economic growth, its impact on economic growth is relative weak.

• Journal of Oriental Neuropsychiatry
• /
• v.12 no.2
• /
• pp.103-122
• /
• 2001

The clinical study was carried out the 58 patients with Headache who were treated in Department of Neuropsychiatry, College of Oriental Medicine, Dae Jeon University from 14 October 1999 to 15 October 2001. The results were summarized as follows. 1. The ratio of male and female was 15:43, 40s(36.2%) was frequent, the ratio of Tension headache and Migraine was 43:12, hypernoia and overwork oneself were the most inducing factor. 2. In distribution of the period of the clinical history, Tension headache was comparatively short term within 1 month(62.8%) and Migraine was comparatively long term over 1 year(91.7%), Tension headache was frequent at whole portion(41.3%) and occipital portion(26.1%), Migraine was frequent at temporal portion(76.9%). 3. In pain type, Tension headache has many vandlike discomport type, Migraine has many pulsatile type, neck-stiffness-pain and dizziness were mainly coexited. 4. Toung aspect has many SULDAMHONGTAEBAEKHOO(舌淡紅苔白厚), GINMAEK(緊脈) and HEUNMAEK(弦脈) were frequent in Pulse type, the GAEDAMSUNKIJEETONG(祛淡順氣止痛) prescription drugs were frequent such as GEYNTONGA(肩痛A), GEYNTONGDODAMTANG(?通導淡湯), Tension headache patients were well treated(90.7%). 5. In Tension headache and Migraine, the Curve has many SL except Tension headache‘s 2th SANGHAN(상한), in Regulation RR was frequent at 1th, 2th, 3th, 4th, 7th SANGHAN and RL was frequent at 5th, 6th SANGHAN, the result of Graph, Activity and Reactivity have many low response at the whole. 6. The Curve was within normal limit at whole portion and frequent SL at temporal portion, the whole and temporal portion s Regulation also have many RR at 1th, 2th, 3th, 4th, 7th SANGHAN and RL at 5th, 6th SANGHAN, Activity and Reactivity have many low response at the whole. 7. The occipital and frontal portion‘s Curve have many SL at 1th SANGHAN, the occipital portion’s Regulation has many RR at 1th, 2th, 4th, 7th SANGHAN and RL at 5th, 6th SANGHAN, Activity has many low response at the whole, Reactivity has many low response at 1th, 4th, 5th, 6th SANGHAN and high response 2th, 3th SANGHAN, the frontal portion s Regulation has many RL at 1th, 3th, 5th, 6th, 7th SANGHAN and RR at 4th SANGHAN, Activity and Reactivity also have many low response at the whole except 6th, 7th SANGHAN respectively.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.2
• /
• pp.17-25
• /
• 2001

In this paper, a theoretical study has been made to reduce the residual stress and birefringence in the injection-molded parts. An optimization program has been used to minimize the residual stresses and birefringence calculated from a simulation program. The thermally induced stress has been calculated using a linear viscoelasticity model. The flow stress and birefringence has been calculated using the Leonov's viscoelasticity model. This has been applied to the injection molding of a circular disc and a plate. the optimization has been done either by changing process variables while maintaining the mold temperature constant or by varying the mold-wall temperature with time. This study shows the significant reduction in residual stress and birefringence is possible through the optimization of processing conditions.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.4
• /
• pp.255-265
• /
• 1995

Stainless steel type 304L has been nitrided in the low pressure (600Pa) and high nitrogen (80% $N_2$+20% $H_2$) environment for 5 hours by the square-wave-pulsed-d.c. plasma as a function of temperature $400{\sim}550^{\circ}C$ and pulsation. At the lower temperature range of $400{\sim}500^{\circ}C$ and at the relatively high ratio of pulse duration to pulse period. "S-phase" has been developed in the form of thin nitrided surface layer which has many cracks, leading to be nearly impossible for the industrial anti-wear and anti-corrosion applications. At the higher temperature up to $550^{\circ}C$ with the increasing ratio of the pulse duration to pulse period up to $50{\mu}s/100{\mu}s$, the nitrided layer, whose growth rate has increased also, has been composed mainly of CrN and $Fe_4N$ phases and has become thick, uniform and nearly crack-free.

• Kyungpook Mathematical Journal
• /
• v.55 no.4
• /
• pp.817-826
• /
• 2015

Let R be a commutative ring with total quotient ring K. Each monomorphic R-module endomorphism of a cyclic R-module is an isomorphism if and only if R has Krull dimension 0. Each monomorphic R-module endomorphism of R is an isomorphism if and only if R = K. We say that R has property (${\star}$) if for each nonzero element $a{\in}R$, each monomorphic R-module endomorphism of R/Ra is an isomorphism. If R has property (${\star}$), then each nonzero principal prime ideal of R is a maximal ideal, but the converse is false, even for integral domains of Krull dimension 2. An integral domain R has property (${\star}$) if and only if R has no R-sequence of length 2; the "if" assertion fails in general for non-domain rings R. Each treed domain has property (${\star}$), but the converse is false.

• Journal of Haehwa Medicine
• /
• v.8 no.2
• /
• pp.289-298
• /
• 2000

The result were obtained as follow: 1. Bladder Meridian has been used most frequently and next to Kidney Meridian has been used many time at the rate of acupuncture points. 2. Bladder Meridian has been used most frequently and next to Stomach Meridian, Kidney Meridian, Conception vessel have been used many time at the rate of frequency of used acupuncture points. 3. The acupuncture points at Lower extremity has been used most frequently and next to the point at back, chest and abdomen, upper extremity, head have been used many time. 4. The point of Ji Gu has been used most frequently and next to Dae Jang Su, Jock Sam Li, Cheon Chu, Jo Hae have been used many time. 5. In herb-medication, Seung Gi Tang has been used most frequently and next to Bi Yack Hwan, Ma In Hwan have been used many time.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.3-7
• /
• 2008

A polishing machine adopting a new unique structural mechanism has been developed, named as a swing-arm type polishing machine. The mechanism is such that the tool path tracks on a spherical surface, of which the diameter is adjusted by setting up the machine mechanism properly. It has a strong benefit especially for polishing axis-symmetric concave mirror surfaces. The swing-arm type polishing machine with 5-axes has been designed in order to polish a concave mirror surface lip to diameter of 2 meters. The drawings are made using 3D CAD and strain-stress analysis has been done by finite element method. AC servo-motor has been used to move the swing arm and a operating software has been developed using a LapVIEW tool. Result of the test run was satisfactory which convinces the usefulness of the swing-arm type polishing machine.

• Journal of Contemporary Eastern Asia
• /
• v.14 no.2
• /
• pp.87-96
• /
• 2015

Social media comprises a vast and consequential landscape that has been poorly mapped and understood. Hundreds of millions of people have eagerly moved many of the conversations and discussions that compose civil society into these services and platforms. There is a need to document and analyze these social spaces for many academic and commercial purposes. The Social Media Research Foundation has engaged a strategy to cultivate better research into the structure and dynamics of social media. The foundation is dedicated to the creation of open tools, open data, and open scholarship related to social media. It has implemented a free and open network collection, analysis, and visualization tool called NodeXL to facilitate social media network research. Using NodeXL a group of researchers has collectively authored a publicly available archive, called the NodeXL Graph Gallery, composed of network data sets and visualizations from users around the world. This site has enabled the aggregation of tens of thousands of network datasets and images. Use of the archive has led to scholarly research results that are based on the wide range and scope of social media data sets available.

• Journal of Korean Society for Quality Management
• /
• v.41 no.2
• /
• pp.261-276
• /
• 2013

Purpose: This study intends to offer strategic implications that can be used in Korean medicine hospitals through analysis of causal relationship among factors focusing on image improvement and trust building. Methods: Differential model was introduced to test causal relationship. Questionnaire was developed, and data was collected and analyzed with Structural Equation Modeling. Results: Medical service has effects on image, trust, and CS. CS has an effect on trustworthiness, and trustworthiness has positive effect on loyalty intention and has negative effect on switching intention. Emotional attachment has moderating functions between trust and loyalty intention and between trust and switching intention. Conclusion: This study offers practical implications to relevant managers, at the same time it has limitations that omits relevant study of inducing factor for emotional attachment.