• Journal of Environmental Impact Assessment
• /
• v.31 no.5
• /
• pp.286-295
• /
• 2022

In this study, the concentration distribution of indoor radon in Daejeon Metropolitan City was investigated and the reduction efficiency was evaluated by applying the radon reduction methods. Based on the results of the National Institute of Environmental Research, indoor radon measurements were conducted on 24 selected houses, and the average value of District A was 261 Bq/m3, far exceeding the standard, and even in the same house, indoor radon concentration was affected by measurement point and time. In the case of eight houses that applied the soil venting method to reduce radon, the indoorradon level was significantly lowerthan the standard value, and the average reduction efficiency was also around 55%, indicating a good reduction effect. In addition, the average reduction efficiency was around 90% in the two houses that carried out the shielding method, showing the very excellent effect of the indoorradon reduction. Even if the same reduction method is applied when reducing radon, the reduction efficiency may vary depending on various factors such as the structure of the building, the frequency of ventilation, and the season, so it is necessary to accurately evaluate the effectiveness of the reduction method in the future. Based on this, it is necessary to establish indoor radon management measures in Daejeon Metropolitan City to reduce human harm caused by radon exposure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.1-6
• /
• 2021

Mercury, once released, is not destroyed but accumulates and circulates in the natural environment, causing serious harm to ecosystems and human health. In the United States, sulfur-impregnated activated carbon is being considered for the removal of vapor mercury from the flue gas of coal-fired power plants, which accounts for about 32 % of the anthropogenic emissions of mercury. In this study, a high-efficiency porous mercury adsorption material was developed to reduce the mercury vapor in the exhaust gas of coal combustion facilities, and the mercury adsorption characteristics of the material were investigated. As a result of the investigation of the vapor mercury adsorption capacity at 30℃, the silica nanotube MCM-41 was only about 35 % compared to the activated carbon Darco FGD commercially used for mercury adsorption, but it increased to 133 % when impregnated with 1.5 % sulfur. In addition, the furnace fly ash recovered from the waste copper regeneration process showed an efficiency of 523 %. Furthermore, the adsorption capacity was investigated at temperatures of 30 ℃, 80 ℃, and 120 ℃, and the best adsorption performance was found to be 80 ℃. MCM-41 is a silica nanotube that can be reused many times due to its rigid structure and has additional advantages, including no possibility of fire due to the formation of hot spots, which is a concern when using activated carbon.

• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.889-896
• /
• 2022

This study attempted to evaluate the usefulness of the air mattress by analyzing the subjective comfort of the patient due to the application of the air mattress to the table of computed tomography through a questionnaire and analyzing the change in image quality through quantitative and qualitative evaluation of the patient's clinical images. The subjects who participated in the study were 221 men and 229 women, and the age range was from 18 to 86. To evaluate the change in image quality, a total of 150 patients, 50 patients per group, were selected for quantitative evaluation, and 20 patients per group, a total of 60 patients were selected for qualitative evaluation. As a result of this study, the subjective comfort of patients increased due to air mattresses, and there was no difference in image quality as a result of quantitative and qualitative evaluation of clinical images. From the above results, it is believed that the air mattress can be usefully applied in a way that can increase the subjective comfort of the patient without any harm to the diagnostic image.

• Clinical and Experimental Reproductive Medicine
• /
• v.49 no.1
• /
• pp.2-8
• /
• 2022

Humanity is in the midst of the coronavirus disease 2019 (COVID-19) pandemic, and vaccines-including mRNA vaccines-have been developed at an unprecedented speed. It is necessary to develop guidelines for vaccination for people undergoing treatment with assisted reproductive technology (ART) and for pregnancy-related situations based on the extant laboratory and clinical data. COVID-19 vaccines do not appear to adversely affect gametes, embryos, or implantation; therefore, active vaccination is recommended for women or men who are preparing for ART. The use of intravenous immunoglobulin G (IVIG) for the treatment of immune-related infertility is unlikely to impact the effectiveness of the vaccines, so COVID-19 vaccines can be administered around ART cycles in which IVIG is scheduled. Pregnant women have been proven to be at risk of severe maternal and neonatal complications from COVID-19. It does not appear that COVID-19 vaccines harm pregnant women or fetuses; instead, they have been observed to deliver antibodies against severe acute respiratory syndrome coronavirus 2 (SARSCoV-2) to the fetus. Accordingly, it is recommended that pregnant women receive COVID-19 vaccination. There is no rationale for adverse effects, or clinical cases of adverse reactions, in mothers or neonates after COVID-19 vaccination in lactating women. Instead, antibodies to SARS-CoV-2 can be delivered through breast milk. Therefore, breastfeeding mothers should consider vaccination. In summary, active administration of COVID-19 vaccines will help ensure the safe implementation of ART, pregnancy, and breastfeeding.

• 한국노년학
• /
• v.41 no.3
• /
• pp.327-351
• /
• 2021

This study was motivated by the awareness that little attention has been paid to this issue both theoretically and empirically, despite the fact that financial abuse causes serious problems which are difficult for the elderly to recover from. This study intends to explore what the patterns of financial abuse targeting the elderly are, what causes and sustains these abuses, and what makes it difficult to counter such financial abuses. Data analysis was based on individual and group interviews of ten professionals expected to encounter the most financially abused elderly in social welfare institutions. The thematic analysis shows that financial abuse is often caused and maintained in a trusting relationship through care and protection. Because financial abuse was inflicted on the vulnerable elderly in a state of reinforced psychological dependence based on a long and trusting relationship, it appears that it has been made with tacit acknowledgement and consent. Despite those complex dynamics, it is noted that financial abuse can be judged as such only when the elderly claim to suffer from harm. Rather, intervention without victims' acknowledgement tends to be perceived as violating their right to self-determination. This reality naturally leads to the termination of the necessary interventions with the victims in an abusive situation. Based on these results, discussion focused on more realistic and diverse approaches to the issue of financial abuse of older adults.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.345-353
• /
• 2021

Cloud computing represent a new era of computing that's forms through the combination of service-oriented architecture (SOA), Internet and grid computing with virtualization technology. Virtualization is a concept through which every cloud is enable to provide on-demand services to the users. Most IT service provider adopt cloud based services for their users to meet the high demand of computation, as it is most flexible, reliable and scalable technology. Energy based performance tradeoff become the main challenge in cloud computing, as its acceptance and popularity increases day by day. Cloud data centers required a huge amount of power supply to the virtualization of servers for maintain on- demand high computing. High power demand increase the energy cost of service providers as well as it also harm the environment through the emission of CO₂. An optimization of cloud computing based on energy-performance tradeoff is required to obtain the balance between energy saving and QoS (quality of services) policies of cloud. A study about power usage of resources in cloud data centers based on workload assign to them, says that an idle server consume near about 50% of its peak utilization power [1]. Therefore, more number of underutilized servers in any cloud data center is responsible to reduce the energy performance tradeoff. To handle this issue, a lots of research proposed as energy efficient algorithms for minimize the consumption of energy and also maintain the SLA (service level agreement) at a satisfactory level. VM (virtual machine) consolidation is one such technique that ensured about the balance of energy based SLA. In the scope of this paper, we explore reinforcement with fuzzy logic (RFL) for VM consolidation to achieve energy based SLA. In this proposed RFL based active VM consolidation, the primary objective is to manage physical server (PS) nodes in order to avoid over-utilized and under-utilized, and to optimize the placement of VMs. A dynamic threshold (based on RFL) is proposed for over-utilized PS detection. For over-utilized PS, a VM selection policy based on fuzzy logic is proposed, which selects VM for migration to maintain the balance of SLA. Additionally, it incorporate VM placement policy through categorization of non-overutilized servers as- balanced, under-utilized and critical. CloudSim toolkit is used to simulate the proposed work on real-world work load traces of CoMon Project define by PlanetLab. Simulation results shows that the proposed policies is most energy efficient compared to others in terms of reduction in both electricity usage and SLA violation.

• Journal of Nutrition and Health
• /
• v.55 no.4
• /
• pp.430-440
• /
• 2022

Selenium is an important trace mineral that plays an essential role in maintaining the body's immunity with oxidative stress defense and antioxidant activity, immunity, thyroid hormone control, defense against drug or heavy metal harm, and reducing the risk of chronic diseases. A selenium deficiency increases the risk of various chronic diseases, such as cancer, cardiovascular disease, diabetes, neurological disease, osteoarthritis, muscle necrosis and weakness, thyroid disease, and inflammatory diseases. This paper explains the criteria for establishing and revising selenium in the 2020 Dietary Reference Intake for Koreans (KDRIs) and reviews the current status of the selenium database and suggestions for setting the 2025 KDRIs in the future. In the 2020 KDRIs, the selenium intake with the maximum plasma selenoprotein P level was used as the criteria. The weight and coefficient of the variation were applied to the Chinese' reported values. Compared to 2015 KDRIs, there were some revisions in the selenium dietary reference intakes by gender and age according to the change in reference weight. To improve and revise selenium dietary reference intakes in the future, a selenium intervention study is needed to determine the maximum level of plasma selenoprotein P in Koreans. In addition, a revision of the selenium database of the nutritional assessment program (CAN-Pro 5.0) is needed. An analysis of the selenium content of foods should be expanded to assess the selenium intake accurately. In addition, research on the relationship between selenium intake and the biological indicators in the body is required for healthy people and subjects of special environments, such as patients and athletes with various oxidative stress.

• Korean Journal of Clinical Pharmacy
• /
• v.32 no.2
• /
• pp.116-124
• /
• 2022

Background: High-alert medications (HAMs) are medications that bear a heightened risk of causing significant patient harm if used in error. To facilitate safe use of HAMs, identifying specific HAM lists for clinical setting is necessary. We aimed to develop the national level HAM list for acute care setting. Methods: We used three-step process. First, we compiled the pre-existing lists referring HAMs. Second, we analyzed medication related incidents reported from national patient safety incident report data and adverse events indicating medication errors from the Korea Adverse Event Reporting System (KAERS). We also surveyed the assistant staffs to support patient safety tasks and pharmacist in charge of medication safety in acute care hospital. From findings from analysis and survey results we created additional candidate list of HAMs. Third, we derived the final list for HAMs in acute care settings through expert panel surveys. Results: From pre-existing HAM list, preliminary list consisting of 42 medication class/ingredients was derived. Eight assistant staff to support patient safety tasks and 39 pharmacists in charge of medication safety responded to the survey. Additional 44 medication were listed from national patient safety incident report data, KAERS data and common medications involved in prescribing errors and dispensing errors from survey data. A list of mandatory and optional HAMs consisting of 10 and 6 medication classes, respectively, was developed by consensus of the expert group. Conclusion: We developed national level HAM list for Korean acute care setting from pre-existing lists, analyzing medication error data, survey and expert panel consensus.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.215-222
• /
• 1996

This study was conducted to compare the growth and yield, and to determine the optimum planting date and density in two improved black soybean varieties. The two varieties were planted by driller attached a tractor on May 21 and June 19, 1993, and treated five planting densities, respectively. Yield of Gumjeongkong 1 was similer for both planting dates, but that of Suwon 157 was remarkably reduced on June 19 planting compared to May 21. There was significant differences between planting dates in stem length, number of branches, seeds per plant, seed weight and yield. Planting density, also, significantly affected on stem length, number of branches and seeds per plant. Statistically significant interactions between planting date$\times$variety and planting date$\times$planting density were found at almost all characteristics, except between variety$\times$planting density. Optimum planting date and density of Gumjeongkong 1 for high yield were June 19 and 33, 000 plants per l0a, and those of Suwon 157 were May 21 and 22, 000 plants per l0a, respectively. The coefficient of variation at different planting densities was high at stem length, number of branches, seeds per plant and yield, but low at number of main stem node, seeds per pod and 100 seed weight.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.597-607
• /
• 2023

Purpose: The Ministry of Employment and Labor has been working hard to ensure the safety of workers due to heavy rain during natural disasters as the responsible ministry in charge of preventing industrial accidents and health problems for workers. Accordingly, the Ministry of Employment and Labor intends to analyze actual cases of responding to heavy rain disasters and suggest ways to improve the response system. Method: An emergency response system implemented to respond to heavy rain disasters with an internal expert group composed of those in charge of disaster work at headquarters, local government offices, and Korea Occupational Safety and Health Agency, and an external expert group composed of professors, consulting representatives, and disaster managers from other ministries. Contents on self-inspection by industry, workplace inspection, use of serious siren, safety management and restoration work guidance were reviewed. Result: First of all, it is necessary to check the regular contact system from time to time, and it is also necessary to prepare and distribute detailed self-checklists for each industry. In addition, it is necessary to check the implementation of self-inspection when inspecting workplaces, and it seems necessary to have measures to increase the readability of information notified through serious disaster sirens. In addition, since safety work is done in the form of a contract, it seems necessary to prepare specific safety guidelines. Conclusion: In order to protect the lives of workers due to seasonal harm and risk factors, unlike the passive coping methods of the past, abnormal weather should not be regarded as an unexpected situation, and it should be actively and preemptively responding beyond the conventional framework.