수평하중을 받는 현장타설말뚝을 합리적이고 경제적으로 설계하기 위해서 가장 중요한 것은 지구조 사이의 상호작용을 이해하는 것이다. 그러나 지난 수십년 동안 수평하중을 받는 깊은 기초의 거동에 대한 많은 연구가 있었음에도 불구하고, 문제의 성격상 삼차원적이며 비대칭성으로 인하여 더해지는 지반고유의 비선형성, 불균일성, 복잡성 때문에 극한수평지지력을 공식화하기란 매우 어렵다 본 연구에서는 특정한 현장조건, 기초의 기하학적 특성(D/B비),하중조건 등에 따른 많은 설계 방법들 중에서 가장 널리 알려진 네 가지의 방법(즉, Reese, Broms, Hansen, 그리고 Davidson)에 대해서 재검토하였다. 그리고 본 연구의 밀환으로 행한 모형실험으로 얻어진 하중-변위곡선을 쌍곡선으로 변환하여 해석된 방곡선수평지지력(H$_h$)과 위의 네 가지 방법들에 의하여 예측되는 극한수평지지력(H$_u$)을 비교하였다. Reese와 Hansen의 방법에 의해 구한 H$_u$ / H$_h$비는 각각 0.966와 1.015로서 실험결과와 매우 근사한 극한수평지지력을 제시하고 있다. 반면에 Davidson의 방법에 의해 구한 H$_u$는 에 비하여 $30\%$ 가량 큰 것으로 예측하고 있으나 네 가지 방법중에서 예측 수평지지력값에 대한 C.O.V.가 가장 작다. 네 가지 방법 중 가장 단순한 Broms의 방법은 H$_u$/ H$_h$: 0.896으로서 네 방법 중에서 극한 수평지지력을 가장 작게 평가하는 것으로 나타나지만 극한수평지지력값을 예측함에 있어서 가장 작은 S.D.를 보인다. 결론적으로, 네 가지의 방법 중 그 어 것도 극한수평지지력을 정확하게 예측한다는 면에서 다른 방법보다 더 우수하다고 할 수는 없다. 또한, 계산과정이 얼마나 정교하거나 복잡한 것과는 상관없이 극한수평지지력을 예측하는데 있어서 신뢰도는 또 다론 문제인 것 같다.
라돈 및 붕괴생성물의 호흡에 의한 인체 피폭선량의 제어가능성을 찾기 위해 다음과 같은 과정을 거쳤다. 1) 라돈에 관련된 기존모델을 토양 기공모델, 실내붕괴 모델, 폐선량계산모델로 분류해석하고, 2) topology이론에 따라 물리유추개념으로써 회로망으로 전환하여, 라돈환경계통을 정식화, 검증계산을 거쳐, 3) 모의계산으로 선량감도를 분석하여 최적 매개변수의 범위를 모색하였다. 매개변수인 환기율, 침적율, 부착율가 제어범위내 변화될 때, 정식화된 111원 연립방정식의 해를 구하여 선량감도를 분석하였으며, 제어매개변수의 선량감도에 의한 효과를 3차원으로 도식화하였다. 본 연구 수행결과, 제어매개변수 변화에 따른 실내의 $^{222}Rn$ 및 Rn-D의 농도 변화과정은 새롭게 해석할 수 있는 벡터감도단층모형으로, 일부 제어매개변수의 조합변화에 따른 선량감도는 3차원 그래프모형으로 나타낼 수 있었다. 선량감도의 3차원 그래프에서는 실내환경의 대표적 매개변수 값 범위에서 변곡점이 나타났으며, 일반적으로 높은 환기조건$(>1h^{-1})$하에서는 공기정화에 의하여 선량이 전반적으로 증가되나, 불충분한 환기조건$(<0.5h^{-1})$하에서는 공기정화에 의하여, 선량이 40%정도로 감소되는 것으로 나타났다 (* 라돈 및 붕괴생성물은 이하 $^{222}Rn$ 및 Rn-D로 통일한다.)
We have conducted a V, I, J, and H surface photometry of a barred galaxy NGC 4314 to analyze the morphology and luminosity distribution of the galaxy. By applying a semi two-dimensional profile decomposition method, we derived the luminosity fractions and the scale lengths of the three distinct components, bulge, disk, and bar: $L_b {\approx}0.35,\;L_d{\approx}0.35,\;L_{bar}{\approx}0.30,\;r_e{\approx}22",\;r_o {\approx} 50"$, and a $\approx$ 60". The bulge of NGC 4314 seems to be triaxial due to the isophotal twists but its luminosity distribution is well approximated by the $r^{1/4}$-law.
We present a mass productive and reproducible assembly technique of a single bundle of single-walled carbon nanotubes (sb-SWNTs) using dielectrophoresis (DEP). Gold electrodes with 10 gaps made via microlithography were used to align the carbon nanotubes (CNTs). The magnitude and type of applied electric field were investigated to verify their effects on CNT assembly. The optimum assembling conditions in which sb-SWNTs could be positioned at a desired site were experimentally identified, and the characteristics of the assembled sb-SWNTs were evaluated from AFM, Raman spectroscopy, and I-V curve. This assembly method has potential for applications such as gas sensors or electronic devices.
The aspherical lenses are used as optical lens of HMD optical system. The optimum cutting condition of PMMA lens sample with ultra precision SPDT, the diamond tool nose radius, the cutting speed, the feed rate, the depth of cut, and cutting fluid type are found. The demanded surface roughness 10 nm Ra, aspherical form error $1.0\;\mu{m}$ P-V for aspherical lens of optical data storage device are satisfied.
본 논문에서는 765kV 송전선로의 일부구간에서 발생되고 있는 풍소음의 대책으로 개발된 저풍소음 도체를 소개하고 이 도체방식을 개발하기 위해 수행된 전기환경장해 및 풍소음 저감 영향에 대한 시험결과를 제시하고 있다. 저풍소음 도체는 우수한 풍소음 저감기능을 가지면서도 기존 전선에 비해 추가적인 전기환경 문제가 발생되지 않아야 하는데, 기존 전선과 달리 전선 주위에 돌기부가 있어서 전계 집중에 따른 환경장해 발생의 우려가 있다. 이러한 이유 때문에 전기환경 모의시험설비인 코로나 케이지를 이용한 코로나 발생 특성 시험을 수행하여 환경설계기준 만족 여부를 확인하였으며, 실규모 시험선로를 이용한 장기 실증시험을 실시하여 송전선로 주변에서 실제 발생 가능한 라디오 장해와 같은 전기환경 장해량에 대한 평가를 실시하여 풍소음 저감효과와 환경설계기준에 만족하는 결과를 얻을 수 있었다.
한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
/
pp.297-300
/
2005
The characteristics of polycrystalline silicon thin-film transistors (poly-Si TFTs) fabricated using sputter deposited amorphous silicon (a-Si) precursor films are investigated. The a-Si films were deposited on flexible polymer substrates using argon-helium mixture gases to minimize the argon incorporation into the film. The precursor films were then laser annealed by using a XeCl excimer laser and a four-mask-processed poly-Si TFT was fabricated with fully self-aligned top gate structure. The fabricated pMOS TFT showed field-effect mobility of $32.4cm^2/V{\cdot}s$ and on/off ratio of $10^6$.
Partial discharge measurement using a ultrasonic technique allows us to detect degradation of the electrical insulation in a power transformer. However, The ultrasonic measurement studies don't offer a good solution in operating conditions. In this paper, we investigated characteristics of ultrasonic noise caused by a 345kV power transformer under operating conditions. The ultrasonic noises generated by corona in air, vibration of core, pump and fan, etc. An ultrasonic frequency caused by corona in air was appeared 9 and 18[MHz] at the outside wall of the transformer. And a spectra of core vibration was detected below 2.5[kHz]. These spectrum were compared with 20 $\sim$ 200[kHz] of the internal partial discharge in the model transformer.
A simple, accurate and reproducible Capillary electrophoresis (CE) assay has been developed for the determination of baicalin, baicalein, wogonin and chrysin in Scutellaria baicalensis. Successful separation of these compounds has been obtained in 35 mM phosphate butter (pH 7.0) using a untreated fused silica capillary ($57{\;}cm{\times}75{\;}{\mutextrm{m}}$ i.d.) at $25^{\circ}C$ with the electric field of 19kV. Baicalin, baicalein wogonin and chrysin was separated and detected at 280 nm 13 min. The detection limits of CE were acceptable compared to HPLC. Reproducibilities of migration time and peak area were 0.66~1.11% (within-run), 2.18~3.38% (between-run) and 3.50~4.55% (within-run), 3.97~4.82%(between-run) at CE. The results indicate that CE could be a promising technique for quality and quantity control analysis of Scutellaria baicalensis as a validation method.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.