• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.327-332
• /
• 2007

버퍼캐시에서 선반입은 교체정책과 함께 중요한 성능 향상 기법 중의 하나이다. 하지만 참조 패턴의 특성에 따라서는 선반입을 수행하면 오히려 전체 수행시간을 증가시키는 경우도 보고된 바 있다. 본 논문에서는 참조 패턴을 탐지하고 탐지된 패턴에 적절히 대응하여, 선반입의 이익은 유지하되 성능에 악영향을 미치지 않는 선반입 기법으로 순환 참조 선반입을 제안한다. 성능 평가를 위해서 리눅스에서 현재 사용되고 있는 미리 읽기 선반입과 순환 참조 선반입의 수행 시간을 비교했다. 다양한 참조 패턴을 가지는 트레이스들에 대한 시뮬레이션 성능 평가 결과, 순차 참조를 많이 포함하는 트레이스에 대해서는 순환참조 선반입이 리눅스의 미리 읽기 선반입과 유사한 정도의 $3\sim5%$ 성능향상을 보였다. 뿐만 아니라, 미리 읽기 선반입 정책을 적용했을 때 오히려 40% 가량의 성능 악화를 초래하는 특정 트레이스에 대해서도 순환 참조 선반입을 적용할 경우 0.07%의 아주 미미한 성능 저하만을 유발하였다. 본 연구에서 제안하는 순환 참조 선반입 기법은 이득이 있을 때만 적극적인 선반입을 수행하여 시스템 성능을 향상시키며, 손해가 발생할 때는 선반입을 중지하여 시스템 성능 악화를 방지함을 실험을 통해 알 수 있다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.329-332
• /
• 2005

Cross rolling process is one of incremental forming processes to form an axi-symmetric shaped metal component. It can be classified into two types according to the shape of dies, which are a drum type (roll type) and a plate type (straight type). It can also be classified into a wedge type and a ramp type processes according to deformation characteristics of a material. The ramp type die is applied to plate type cross rolling process in cold forming process for forming of teeth of gear or bolt, while the wedge type die is generally utilized to drum type and plate type cross rolling processes in hot forming process. A shape of the ramp type die is usually same as final shape of a product at every section of a progressing direction, while the shape of the wedge type die has different shapes in a progressing direction. In this paper, a rolling of neck part in a ball stud component has been carried out using the plate type cross rolling process with a ramp shaped die. Forming characteristics have been performed using finite element analysis in order to obtain a proper preform for the ramp type plate cross rolling process.

• Membrane Journal
• /
• v.23 no.5
• /
• pp.332-342
• /
• 2013

In the present study, carbon molecular sieve (CMS) hollow fiber membranes were prepared by carbonizing a methyl imide hollow fiber precursor, which was spun by non-solvent induced phase separation process. And effects of carbonization parameters such as pre-oxidation, pyrolysis, and post-oxidation on the gas permeation were systematically investigated. CMS membrane having the highest gas flux was obtained by carbonizing the precursor through a combined process of air pre-oxidation at $250^{\circ}C$ for 2h, nitrogen pyrolysis at $550^{\circ}C$ for 2h, and oxygen post-oxidation at $250^{\circ}C$ for 2h. The optimized membrane showed a considerable gas permeance : the $H_2$, He, $CO_2$ permeances were 69.72, 35.61, 31.01 GPU, respectively, and the $O_2$ and $N_2$ permeances were ignorable. Therefore, it was clear that the prepared CMS hollow fiber membrane was a promising membrane for recovering small gases such as hydrogen and hellium and carbon dioxide.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.4
• /
• pp.327-332
• /
• 1987

Soil samples were collected from the paddy soils growing two crops of rice and garlic in Kyung-pook province. To obtain the basic information on the application of S-fertilizer in the garlic field, the adsorption and release amount of $SO_4{^{-2}}$ in subsoil samples were determined. The ranges of $SO_4{^{-2}}$ contents in surface and sub-soil were 59-117 and 34-102 ppm, respectively. The amount of $SO_4{^{-2}}$ adsorbed by soil samples was found to be more at lower pH and higher concentration of $SO_4{^{-2}}$. The $SO_4{^{-2}}$ adsorption constants in Freundlich equation tended to be higher at lower pH. It is apparent that most of $SO_4{^{-2}}$ was released in the first extraction. However, the lower the pH of extracted solution, the more the $SO_4{^{-2}}$ contents was released by distilled water.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.330-332
• /
• 2013

소 분위기에서 플라즈마 표면 처리의 경우 기판 표면에 존재하는 수소와 탄소 유기물들이 산소와 반응하여 $H_2O$와 $CO_2$ 등으로 제거되며 표면에 오존 결합을 유도하여 표면 에너지를 증가시키는 것으로 알려져 있다. ZnO 나노구조물을 성장시키는 방법으로는 MOCVD (Metal-Organic Chemical Vapor Deposited), PLD (Pulsed Laser Deposition), VLS (Vapor-Liquid-Solid), Sputtering, 습식화학합성법(Wet Chemical Method) 방법 등이 있다. 그중에서도 습식화학합성법은 쉽게 구성요소를 제어할 수 있고, 저비용 공정과 낮은 온도에서 성장 가능하며 플렉서블 소자에도 적용이 가능하다. 그러므로 본 연구에서는 플라즈마 표면처리에 따라 표면에너지를 변화하여 습식화학합성법으로 성장시킨 ZnO nanorods의 밀도를 제어하고 photolithography 공정 없이 패터닝 가능성을 유 무를 판단하는 연구를 진행하였다. 기판은 Si wafer (100)를 사용하였으며 세척 후 표면에너지 증가를 위한 플라즈마 표면처리를 실시하였다. 분위기 가스는 Ar/$O_2$를 사용하였으며 입력전압 400 W에서 0, 5, 10, 15, 60초 동안 각각 실시하였다. ZnO nanorods의 seed layer를 도포하기 위하여 Zinc acetate dehydrate [Zn $(CH_3COO)_2{\cdot}2H_2O$, 0.03 M]를 ethanol 50 ml에 용해시킨 후 스핀코팅기를 이용하여 850 RPM, 15초로 5회 실시하였으며 $80^{\circ}C$에서 5분간 건조하였다. ZnO rods의 성장은 Zinc nitrate hexahydrate [$Zn(NO_3)_2{\cdot}6H_2O$, 0.025M], HMT [$C6H_{12}N_4$, 0.025M]를 deionized water 250 ml에 용해시켜 hotplate에 올리고 $300^{\circ}C$에서 녹인 후 $200^{\circ}C$에서 3시간 성장시켰다. ZnO nanorods의 성장 공정은(Fig. 1)과 같다. 먼저 플라즈마 처리한 시편의 표면에너지 측정을 위해 접촉각 측정 장치[KRUSS, DSA100]를 이용하였다. 그 결과 0, 5, 10, 15, 60 초로 플라즈마 표면 처리했던 시편이 각각 Fig. l, 2와 같이 $79^{\circ}$, $43^{\circ}$, $11^{\circ}$, $6^{\circ}$, $7.8^{\circ}$로 측정되었으며 이것을 각각 습식화학합성법으로 ZnO nanorods를 성장 시켰을 때 Fig. 3과 같이 밀도 차이를 확인할 수 있었다. 이러한 결과를 바탕으로 기판의 표면에너지를 제어하여 Fig. 4와 같이 나타나며 photolithography 공정없이 ZnO nanorods를 패터닝을 할 수 있었다. 본 연구에서는 플라즈마 표면 처리를 통하여 표면에너지의 변화를 제어함으로써 ZnO nanorods 성장의 밀도 차이를 나타냈었다. 이러한 저비용, 저온 공정으로 $O_2$, CO, $H_2$, $H_2O$와 같은 다양한 화학종에 반응하는 ZnO를 이용한 플렉시블 화학센서에 응용 및 사용될 수 있고, 플렉시블 디스플레이 및 3D 디스플레이 소자에 활용 가능하다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.2
• /
• pp.149-154
• /
• 2011

Two experiments were conducted to investigate the effects of dietary moisture content on the growth and gastrointestinal evacuation of sub-adult olive flounder (Paralichthys olivaceus) in the summer and winter seasons. In the first experiment, three experimental diets containing different moisture levels (7%, 15%) and additives were prepared by adding water and commercial additives (1% nutrients, 1% digestives) to commercial extruded pellets. Fish (initial weight: $332{\pm}9.2$ g) were distributed randomly into six 3000 L tanks (25 fish/tank) in a flow-through tank system. Two replicate groups of fish were fed the experimental diets to satiation for 14 weeks during the summer season ($21.4{\pm}2.5^{\circ}C$). Survival, weight gain, feed efficiency, and daily feed intake did not differ significantly among groups. In the second experiment, two experimental diets containing different moisture levels (8%, 23%) were prepared by adding water to commercial extruded pellets. Fish (initial weight: $646{\pm}6.7$ g) were randomly distributed into six 3000 L tanks (20 fish/tank) in a flow-through tank system. Three replicate groups of fish were fed the experimental diets to satiation for 19 weeks during the winter season ($12.2{\pm}1.2^{\circ}C$). Weight gain, feed efficiency, and daily feed intake did not differ significantly among groups. Gastrointestinal evacuation rates were determined after the end of the winter feeding trials. The stomach contents of fish fed diets containing different moisture levels peaked within 3 h after feeding and then decreased gradually over 40 h to approach pre-feeding levels. Intestinal contents began to accumulate 3 h after feeding and reached a maximum at 32 h, then declined until nearly complete evacuation around 56 h. The stomach contents reached moisture levels of approximately 70% within 3 h after feeding and then increased gradually. No considerable difference in moisture levels was observed in the stomach contents of fish fed diets with different moisture contents. The results of this study suggest that the gastric evacuation of sub-adult olive flounder was not affected by dietary moisture level and the addition of water to the diet had no beneficial effect on the growth of sub-adult olive flounder in the summer and winter seasons.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.323-332
• /
• 1988

The bacteria containing urease convert each molecule of urea into two molecules of ammonia and one molecule of carbon dioxide gas. Bacterial electrodes have been constructed by immobilizing the Proteus vulgaris on an ammonia and a carbon dioxide gas-sensors, and were investigated for the effects of pH, temperature, buffer solution, bacterial amounts and interferences, and life time. NH3-bacterial electrode based on ammonia gas-sensor had linearity in the range of $7.0{\times}10^{-4}\;-\;3.0{\times}10^{-2}$M urea in pH 7.4, 0.05M phosphate buffer at $25^{\circ}C$ with a slope of 116.7 mV/decade. While $CO_{2-}$bacterial electrode based on carbon dioxide gas-sensor bad linearity in the range of $7.0{\times}10^{-4}\;-\;5. 0{\times}10^{-2}$M urea in pH 7.0, 0.1M phosphate buffer at $30^{\circ}C$with a slope of $45.4{\times}45.7mV/decade$. As the clinical application, urea in urine was determined by these devices and this result was compared with spectrophotometric method. Consequently, these electrodes could be used for the analysis of many samples because of simplicity, rapidity and convenience of the experimental procedure.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.324-332
• /
• 2009

This study aimed to measure chemical resistance properties of the microfiltration flat-sheet membrane made by Chlorinated Polyvinyl Chloride (CPVC) with respect to the immersed time. The solutions of effective chlorine 0.5 wt% NaClO, HCl 1 wt% and pH 4 buffer under acidic condition, NaOH 4 wt% and pH 10 buffer under alkine condition were used as widely applied chemicals for membrane washing. The CPVC membrane samples were immersed in the above chemical solutions during 1, 3, 5 and 10 days at 5, 25 and $50^{\circ}C$, respectively. After then, the tensile strength and elongation at break as the chemical durability for the samples were measured and evaluated. The tensile strength decreased within 5% at $5^{\circ}C$, but decreased up to 17% at 25 and $50^{\circ}C$ for 0.5 wt% NaClO solution mainly used for membrane cleaning. The chemical resistance of CPVC membrane was good enough for HCl 1 wt% and pH 4 buffer acid solutions, but the most vulnerable for NaOH 4 wt% solution.

• KSBB Journal
• /
• v.26 no.4
• /
• pp.328-332
• /
• 2011

Ethanol production using glycerol as a carbon source was performed by Enterobacter aerogenes immobilized on calcium alginate beads. To improve the ethanol production, the optimal conditions such as loading amount of immobilized cells and glycerol concentration were investigated. The optimal loading amount of immobilized cells and glycerol concentration were 10 mL of calcium alginate bead and 10 g/L, respectively. Consequently, glycerol consumption rate, ethanol concentration and yield were 0.32 g/$L{\cdot}h$, 3.38 g/L and 0.43 g/g on the batch production, respectively. Continuous production of ethanol was successfully achieved using two types of immobilized cell reactors (continuous stirred tank reactor and packed bed reactor) from 10 g/L of glycerol. In the continuous stirred tank reactor, glycerol consumption, ethanol concentration, specific productivity and yield were 9.8 g, 4.67 g/L, 1.17 g/$L{\cdot}h$, 0.48 g/g, respectively. The concentration of produced ethanol was 38-44% higher comparison to batch fermentation, and continuous stirred tank reactor showed better performance than packed bed reactor.

• Macromolecular Research
• /
• v.17 no.5
• /
• pp.332-338
• /
• 2009

Rheological behavior of natural hydrogel produced from seeds of three Salvia spp. (S. miltiorrhiza (SM), S. sclarea (SS), S. viridis (SV)) was investigated by using a Rheometer equipped with a cone and plate geometry measuring system under never-dried condition. Different chemical contents of such hydrogels give significant effects on their rheological properties. Because of incomplete penetration of water inside the hydrogels after drying before-dried hydrogels were used for rheological analysis. To know molecular interactions which predominated in the gel formation, some constituents were externally added to the 1.0% (w/w) hydrogel. Addition of urea to disrupt hydrogen bonds reduced 3.4-67% viscosity of the untreated hydrogels and changed viscoelastic properties from gel to liquid-like behavior. Neutral salts added to the hydrogel solution at 0.1 M also lowered the viscosity in a manner related with increase in size of cations and temperature. Changing from gel state to liquid-like state was also easily confirmed by oscillation measurement (storage, G', and loss, G", modulii) typically observed in the cases of potassium sulfate and potassium thiocyanate. Influence of pH variation on the viscosity explained that weak alkaline condition (pH 8-9) creates a higher resistance to flow due to increasingly electrostatic repulsions between negative charges ($COO^-$) Importance of calcium bridges was also demonstrated by recovery of viscosity of the hydrogels by addition of calcium after acidification. The summarized results indicate that electrostatic repulsion is a major contributor for production of hydrogel structure.