• KSBB Journal
• /
• v.30 no.2
• /
• pp.82-90
• /
• 2015

Plant cell immobilization can protect plant cells from shear forces and increase the stability of gene. An additional advantage of immobilization is the easiness for performing continuous culture with cell recycling. Therefore plant cell immobilization can overcome the limitations of plant cell applications. In addition, target protein should be selected from pharmaceutical proteins to get rid of low expression level problem. The enhanced production of human granulocyte-macrophage colony-stimulating factor (hGM-CSF) was investigated in immobilized Nicotiana tabacum suspension cell cultures. When the cells were immobilized in polyurethane foam, specific production of hGM-CSF was higher than that in alginate bead immobilization. Optimum continuous culture condition was the addition of 60 g/L sucrose in growth media with exchanging media every 6 day. Under the same condition, specific hGM-CSF production was 7 times higher in a 500-mL spinner flask than that in 100-mL Erlenmeyer flasks. Therefore, development of an effective immobilization process would be possible when the advantage of easy cell recycling was used. Consequently, enhanced production of target proteins could be possible in immobilized continuous cultures when the advantages of immobilization were applied.

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.3
• /
• pp.379-381
• /
• 1989

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.425-426
• /
• 2012

• Structural Engineering and Mechanics
• /
• v.63 no.5
• /
• pp.629-637
• /
• 2017

Continuous concrete beams are commonly used as structural members in the reinforced concrete constructions. The use of fiber reinforced polymer (FRP) bars provide attractive solutions for these structures particularly for gaining corrosion resistance. This paper presents experimental results of eight two-span continuous concrete beams; two of them reinforced with pure glass fiber reinforced polymer (GFRP) bars and six of them reinforced with combinations of GFRP and steel bars. The continuous beams were tested under monotonically applied loading condition. The experimental load-deflection behavior and failure mode of the continuous beams were examined. In addition, the continuous beams were analyzed with a numerical method to predict the load-deflection curves and to compare them with the experimental results. Results show that there is a good agreement between the experimental and the theoretical load-deflection curves of continuous beams reinforced with pure GFRP bars and combinations of GFRP and steel bars.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.352-359
• /
• 2005

This work has studied the changes of pH in both of anodic and cathodic chambers of a divided cell due to the electrolytic split of water during the ammonia decomposition to nitrogen, and has studied the continuous decomposition characteristics of ammonia in a multi-cell stacked electrolyzer. The electrolytic decomposition of ammonia was much affected by the change of pH of ammonia solution which was caused by the water split reactions. The water split reaction occurred at pH of less than 8 in the anodic chamber with producing proton ions, and occurred at pH of more than 11 in the cathodic chamber with producing hydroxyl ions. The pH of the anodic chamber using an anion exchange membrane was sustained to be higher than that using a cation exchange membrane, which resulted in the higher decomposition of ammonia in the anodic chamber. By using the electrolytic characteristics of the divided cell, a continuous electrolyzer with a self-pH adjustment function was newly devised, where a portion of the ammonia solution from a pHadjustment tank was circulated through the cathodic chambers of the electrolyzer. It enhanced the pH of the ammonia solution fed from the pH-adjustment tank into the anodic chambers of the electrolyzer, which caused a higher decomposition yield of ammonia. And then, based on the electrolyzer, a salt-free ammonia decomposition process was suggested. In that process, ammonia solution could be continuously decomposed into the environmentally-harmless nitrogen gas up to 83％, when chloride ion was added into the ammonia solution.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.387-394
• /
• 1993

In order to investigate the effects of continuous and pH cyclic remineralization, artificial enamel carious lesions were produced on sections of about 2mm thickness of bovine incisor. 0.1M lactic acid solution adjusted to a pH of 4.3 and saturity of $2.98{\times}10^{-8}$ was used as demineralizing solution. The lesions were remineralized with the solution of pH 7.0 containing 1.5mM $CaCl_2$, 0.9 mM $KH_2PO_4$ and 20mM Hepes. In continuous remineralization procedure, the specimens were immersed in remineralizing solution continuously for 72 hours. In pH cyclic remineralization procedure, the sections were immersed in remineralizing solution for 6 hours and in dermineralizing solution for 20 minutes alternately during 72 hours. The effect of remineralization was determined by polarizing microscopy and electron microprobe analysis. The obtained results were as follows. 1. In case of continuous remineralization, the lesion depth was reduced partially or unchanged. 2. In pH cyclic condition, the thichness of surface layer and the lesion depth were increased simultaneously. 3. The mineral content of lesion was recovered to the level of sound enamel by remineraiization.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.5
• /
• pp.661-666
• /
• 2014

Both lactic acid productivity and cell growth were linearly correlated with yeast extract supplementation in batch fermentation. During conventional continuous operation, although fresh feed was introduced into the bioreactor with a significantly low dilution rate (0.04 $h^{-1}$), the amount of yeast extract employed was not enough to maintain the growth of microorganism. However, when the fresh feed contained 100 g/l glucose and 2 g/l yeast extract during cell-recycle continuous operation at a dilution rate of 0.04 $h^{-1}$, more than 90 g/l lactic acid was continuously produced, with the average productivity of 3.72 $g/l{\cdot}h$. In this experiment, 82 g of yeast extract (77% of reduction yield) could be reduced for the production of 1 kg of lactic acid compared with batch fermentation of a similar volumetric productivity.

• Journal of Animal Environmental Science
• /
• v.4 no.2
• /
• pp.149-160
• /
• 1998

Hog manure slurry amended with sawdust was composted in pilot-scale reactor vessels using continuous aeration nuder different C/N ratios and pH conditions during composting high rate (decomposition) process. For each material two replicated piles were built and monitored over a period of three weeks. The compost piles had an initial volume of 0.18 ㎥. In this study we evaluated the temperature in compost O2 and CO2 evolution, aeration rate, NH3 concentration etc. and investigated the stability of compost during composting high rate process. According to measured results, while the maximum NH3 concentration during composting high rate process. According to measured results, while the maximum NH3 concentration during composting high rate was in the range of 213 to 412 ppm on 5th day which was near the optimum C/N(22∼24) and pH(7.5∼7.9). And then, the NH3 concentration reduced to between 22∼26 ppm by 13th day. The maximum NH3 concentration for the lower C/N(18∼19) and pH value of 6 reached 574∼1,063 ppm by the 16th through 11th days and the NH3 concentration during continuous aerated composting high rate process, it was more important to manage NH3 gas so that compost odor is reduced.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.1
• /
• pp.6-10
• /
• 2001

The production of chitosan from the mycelia of Absidia coerulea was studied to improve cell growth and chitosan productivity. Culture conditions were optimized in batch cultivation (pH 4.5, agitator speed of 250 rpm, and aeration rate of 2 vvm) and the maximum chitosan concentration achieved was 2.3g/L under optimized conditions. Continuous culture was carried out successfully by the formation of new growth spots under optimized conditions, with a chitosan productivity of 0.052g/L(sup)-1 h(sup)-1, which is the highest value to date, and was obtained at a dulution rate of 0.05h(sup)-1. Cell chitosan concentrations reached about 14% in the steady state, which is similar to that achieved in batch culture. This study shows that for the continuous culture of Absidia coerulea it is vital to control the medium composition.

• Journal of Life Science
• /
• v.14 no.1
• /
• pp.167-173
• /
• 2004

The optimal conditions for the continuous production of $\gamma$-aminobutyric acid by immobilization of Lactobacillus brevis BH-21 using column type reactor were investigated. The optimal conditions of operation were 2.2 mm diameter bead of 3.0% sodium alginate at 10 mL/h of substrate feeding rate. Continuous production by immobililzed cells showed the highest productivity with replacement of fresh medium in every 48h for fourth fermentatoin cycle following the rendition of $\gamma$-aminobutyric acid productivity. A productivity of $\gamma$-aminobutyric acid could be obtained for 25 days by continuous column type reactor under optimal conditions.