• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.15-23
• /
• 2009

Saturation-coverage silyl, $-SiH_3(a)$, overlayers were prepared from $Si_2H_6$ adsorption on three comparative surfaces: clean unmodified; D-precovered; and atomically roughened Si(100). Together with its precursor-mediated adsorption behavior, the surface reactivity of $Si_2H_6$ was found to be the highest on the unmodified Si(100)-$2{\times}1$ surface. This was correlated with its dissociative adsorption mechanism, in which both the $H_3Si-SiH_3$ bond scission and the dual surface $Si-SiH_3(a)$ bond formation require a surface dangling bond 'pair'. The unusually high thermal stability of $-SiH_3(a)$ on the unmodified surface was ascribed to a nearly close-packed $-SiH_3(a)$ coverage of ${\sim}0.9$ monolayer and the consequent lack of dangling bonds on the silyl-packed surface.

• Journal of the Korean Vacuum Society
• /
• v.6 no.S1
• /
• pp.59-65
• /
• 1997

Efficient Si(100) etching by thermal H atoms at low substrate temperatures has been achieved. Gas-phase etching product $SiH_4$(g) upon H atom bombardment resulting from direct abstraction of $SiH_3$(a) by impinging H atoms was detected with a quadrupole mass spectrometer over the substrate temperature range of 105-408 K Facile depletion of all surface silyl ($SiH_3$) groups the dissociative adsorption product of disilane ($Si_2H_6$) at 105K from Si(100)2$\times$1 by D atoms and continuous regeneration and removal of $SiD_3$(a) were all consumed. These results provide direct evidence for efficient silicon surface etching by thermal hydrogen bombardment at cryogenic temperatures as low as 105K We attribute the high etching efficiency to the formation and stability of $SiH_3$(a) on Si(100) at lowered surface temperatures allowing the $SiH_3$(a) abstraction reaction by additional H atom to produce $SiH_4$((g).

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1973-1975
• /
• 2010

The electronic and adsorption structure of o-phthalaldehyde (OPA) on the H-Si(100) surface was investigated by using Near Edge X-ray Fine Structure (NEXAFS) and high resolution photoemission spectroscopy (HRPES). We confirmed that the OPA grown on the H-Si(100) surface showed good dependency with about 60 degree tilting angle using NEXAFS and a single O 1s peak by using HRPES. Hydrogen atom passivated on the Si(100) surface was found to be a seed for making one dimensional organic line that uses a chain reaction as the H-Si(100) surface was compared with the hydrogen free Si(100) surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.79-79
• /
• 2010

The electronic and adsorption structure of O-Phthaladehyde (OPA) on the H-Si(100) surface was investigated by using Near Edge X-ray Fine Structure (NEXAFS) and high resolution photoemission spectroscopy (HRPES). We confirmed that the OPA grown on the H-Si(100) surface showed good dependency with about 60 degree tilting angle using NEXAFS and a single O 1s peak by using HRPES. Hydrogen atom passivated on the Si(100) surface was found to be a seed for making one dimensional organic line that uses a chain reaction as the H-Si(100) surface was compared with the hydrogen free Si(100) surface. Through the spectral analysis, we will demonstrate 1-D directional formation of OPA on H-Si(100) surface using NEXAFS and HRPES.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.383-383
• /
• 2010

Gas-phase hydrogen atoms create a variety of chemical and physical phenomena on Si surfaces: adsorption, abstraction of pre-adsorbed H, Si etching, Si amorphization, and penetration into the bulk lattice. Thermal desorption/evolution analyses exhibited three distinct peaks, including one from the crystalline bulk. It was previously found that thermal-energy gaseous H(g) atoms penetrate into the Si(100) crystalline bulk within a narrow substrate temperature window(centered at ~460K) and remain trapped in the bulk lattice before evolving out at a temperature as high as ~900K. Developing and sustaining atomic-scale surface roughness, by H-induced silicon etching, is a prerequisite for H absorption and determines the $T_s$ windows. Issues on the H(g) absorption to be further clarified are: (1) the role of the detailed atomic surface structure, together with other experimental conditions, (2) the particular physical lattice sites occupied by, and (3) the chemical nature of, absorbed H(g) atoms. This work has investigated and compared the thermal H(g) atom absorptivity of Si(100), Si(111) and Si(110) samples in detail by using the temperature programmed desorption mass spectrometry (TPD-MS). Due to the differences in the atomic structures of, and in the facility of creating atom-scale etch pits on, Si(100), (100) and (110) surfaces, the H-absorption efficiency was found to be larger in the order of Si(100) > Si(111) > Si(110) with a relative ratio of 1 : 0.22 : 0.045. This intriguing result was interpreted in terms of the atomic-scale surface roughening and kinetic competition among H(g) adsorption, H(a)-by-H(g) abstraction, $SiH_3(a)$-by-H(g) etching, and H(g) penetraion into the crystalline silicon bulk.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.116-116
• /
• 2011

오늘날 표시장치는 경량, 고밀도, 고해상도 대면적화의 요구에 의해 TFT-LCD의 발전이 이루어졌다. TFT에는 반도체 재료로서, Poly-Si을 사용하는 Poly-Si TFT와 a-Si:H를 이용하는 a-Si;H TFT가 있는데 a-Si는 $350^{\circ}C$ 이하의 저온으로 제작이 가능하여 많이 사용되고 있다. 이러한 방향에 맞추어 bottom gate 구조의 a-Si TFT 실험을 진행하였다. P-type silicon substrate ($0.01{\sim}0.02{\Omega}-cm$)에 gate insulator 층인 SiNx (SiH4 : NH3 = 6:60)를 200nm 증착하였다. 그리고 그 위에 active layer 층인 a-Si (SiH4 : H2 : He =2.6 : 10 : 100)을 다른 RF power를 적용하여 100 nm 증착하였다. 그 위에 Source와 Drain 층은 Al 120 nm를 evaporator로 증착하였다. active layer, gate insulator 층은 ICP-CVD 장비를 이용하여 증착하였으며, 공정온도는 $300^{\circ}C$ 로 고정하였다. active layer층 증착시 RF power는 100W, 300W, 500W, 600W로 가변하였고, width/length는 100 um/8um로 고정하였다. 증착한 a-Si layer층을 Raman spectroscope, SEM 측정 하였으며, TFT 제작 후, VG-ID, VD-ID 측정을 통해 전기적 특성인 Threshold voltage, Subthreshold swing, Field effect mobility, ON/OFF current ratio를 비교해 보았다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1686-1690
• /
• 1989

Using the anisotropic etching characteristics of N2H4-H2O solutions, Si diaphragm was fabricated for the integrated sensors. The optimal composition and temperature of the etching solution in (100) Si etching process was established to be 50mol% N2H4 in H2O at 105\ulcorner\ulcorner for both higher etch rate (=2.6\ulcorner/min) and better surface quality of etched (100) planes. Based on the above optimal etching condition, the electrochemical etch-stop technique was employed to form n-type Si diaphragm having a thickness of 20\ulcorner and the thickness of diapragm could exactly be controlled to 20\ulcorner\ulcorner.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.407-414
• /
• 1996

We have investigated the effects of H atoms on thin film growth processes and surface reactions. In the oxidation of Si, Si surfaces are passivated against the $O_2$ adsorption by terminating dangling bonds with H atoms. Moreover, the existence of Si-H bonds on Si(100) surfaces enhances the structural relaxation of Si-O-Si bonds due to a charge transfer from Si-Si back bonds. In the heteroepitaxial growth of a Si/Ge/Si(100) system, H atoms suppress the segregation of Ge atoms into Si overlayers since the exchange of Ge atoms with Si atoms bound with H must be accompanied with breaking of Si-H bonds. However, 3-dimensional island growth is also promoted by atomic H irradiation, which is considered to result from the suppression of surface migration of adsorbed reaction species and from the lowering of step energies by the H termination of dangling bonds.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.738-741
• /
• 2000

Univorm epitaxial $CoSi_2$layers have been grown in situ on a (100) Si substrate at temperatures near$ 600^{\circ}C$ by reactive chemical vapor deposition of cyclopentadienyl dicarbonyl cobalt, (Co(η(sup)5-C(sub)5H(sub)5) ($CO_2$). The growth kinetics of an epitaxial $CoSi_2$layer on al Si(100) substrate was investigated at temperatures ranging from 575 to $650^{\circ}C$. In initial deposition stage, plate-like discrete $CoSi_2$spikes were nucleated along the <111> directions in (100) Si substrate with a twinned structure. The discrete $CoSi_2$plates with both {111} and (100) planes grew into an epitaxial layer with a flat interface on (100) Si. For epitaxial $CoSi_2$growth on (100) Si, the activation energy of the parabolic growth was found to be 2.82 eV. The growth rate seems to be controlled by the diffusion of Co through the $CoSi_2$layer.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.3
• /
• pp.133-138
• /
• 2002

The growth of Au films grown on a Si(100)-2x1 surface and Si films on a Ge(100)-2x1 substrate is studied using Positron-annihilation induced Auger Electron Spectroscopy(PAES), Electron induced Auger Electron Spectroscopy(EAES), and Low Energy Electron Diffraction(LEED). Previous work has shown that PAES is almost exclusively sensitive to the top-most atomic layer due to the trapping of positrons in an image potential well just outside the surface before annihilation. This surface specificity is exploited to profile the surface atomic concentrations during the growth of Au on Si(100) and Si on Ge(100) and EAES provides concentrations averaged over the top 3-10 atomic layers simultaneously. The difference in the probe-depth makes us possible to use PAES and EAES in a complementary fashion to estimate the surface and near surface concentration profiles. The results show that (i) the intermixing of Au and Si atoms occurs during the room temperature deposition, (ii) the segregated Ge layer is observed onto the Si layers deposited at 300k. In addition, the prior adsorption of hydrogen prevents the segregation of Ge on top of the deposited Si and that the hydrogen adsorption is useful in growing a thermally stable structure.