• 한국식품조리과학회지
• /
• 제5권2호
• /
• pp.35-41
• /
• 1989

This study was written to assess microbilogical quality by passage of time and holding method after making foods, by means of evaluating time, temperature and microbiological quality during vairous phases in product flow of hard-boiled mackerel served by an industry feeding operation for 500 persons a day, measuring pH & Aw and analyzing factors affecting nicrobiological growth conditions. The results were as fallows: 1. According to phases in product flow of hard-boiled mackerel, it showed 4.9 hours of mean of needed time, $27.5^{\circ}C$ of room temperature, 4.8~5.7 of pH value and 0.95~0.98 of Aw. these conditions were suitable for microbiological growth, and the phases with potential hygienic danger were pre-preparation and assembly & service. 2. As for holding methods and passage of time, holding as steam table was more effective than holding at room temperature as time past. 3. Food poisoning bacteria were not dectected from phases in product flow of hard-boiled mackerel.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2003년도 제8차 학술대회 초록집
• /
• pp.87-87
• /
• 2003

Purpose： To determine the motor cortex dysfunction in hemiparetic patients due to deep intracerebral hematoma, authors peformed proton magnetic resonance spectroscopy (1H MRS) for the evaluation of biochemical changes in the cortex on affected hemisphere according to axonal injury at the level of internal capsule. Materials and methods： Ten control subjects and 14 patients with documentable hemiparesis of varying severity hemiparesis were included. All the hemiparesis was caused by deep intracerebral hematoma (putaminal and thalamic hemorrhage). In vivo 1H MRS study was performed on a 3T MRI/MRS system using STEAM sequence. As a single-voxel technique, Spectral parameters were： 20 ms TE, 2000 ms TR, 128 averages, 2500 Hz spectral width, and 2048 data points.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.871-878
• /
• 2000

Exergetic and thermoeconomic analysis were performed for a 500-MW combined cycle plant and a 137-MW steam power plant without decomposition of exergy stream of matter into thermal and mechanical exergies. The calculated costs of electricity are almost same within 0.5% as those obtained by the thermoeconomic method with decomposition of exergy into thermal and mechanical exergies of the combined cycle plant. However for the gas-turbine cogeneration plant having different kinds of products. the difference in the unit costs of products, obtained from the two methodologies is about 2%. Such outcome indicates that the level at which the cost balances are formulated does not affect the result of thermoeconomic analysis, that is somewhat contradictory to that concluded previously.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.260-262
• /
• 2002

The scope of applications industrial or household manufactures, is on the increase. In this study, it applies a principle of induction heating to food dryness for preservation of food. And it applies indirect heating process using overheating steam, which analyzes thermal characteristic of heating apparatus depending on its construction. It was verified that application of proposed process was appropriate by drying test of food.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.537-538
• /
• 2005

• 한국수산과학회지
• /
• 제10권3호
• /
• pp.145-149
• /
• 1977

Thermal resistance of dried bacterial spores against dry heat was determined. Spare suspensions of Bacillus subtilis var. niger ATCC 9372, Bacillus stearothermophilus Oxoid Code BR 23 and Clostridium sporogenes ATCC 19404 were located on aluminium strips, dried in electric oven under vacuum at room temperature for 10 minutes. The aluminium strips were laid in the middle of gas flow (hot air and superheated steam) with the velocity of 6 m/sec and heated at $120^{\circ}C$ for 180 seconds. The calculated D-values showed that there were no remarkable differences in the heat resistance of bacterial spares between $R.H.\leqq0.012$ and R. H.=0.51. Furthermore the thermal resistance of B. subtilis spores to dry heat was greater than that of B. stearothermophilus.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.154-165
• /
• 1996

As II-anhydrite reacts with C3A(aluminate), C4AF(ferrite) at initial hydration of cement and assists the hydrolysis of C3S(calcium silicate), the production rate of ettringite(3C3A.3CaSO4.32H2O) and C-S-H gel was acclerated. It was known that compressive strength of cement concrete improved due to the effect of II-anhydrite. For the checking these effects of II-anhydrite, the fluidity and compressive strength of cementmortar admixed with II-anhydrite and pozollanic fine powders were investigated. By means of SEM analysis, the surface structure of mortar with the condition of steam curing at curing days=28 was investigated. As a result of this experiment, it was examined that II-anhydrite had an increase on the fluidity of cementpaste and compressive strength of mortar.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2002년도 제7차 학술대회 초록집
• /
• pp.79-79
• /
• 2002

Purpose： The reliability of absolute quantification of average metabolite concentrations in the human brain in vivo by H-MRS using the fully relaxed water signal as an internal standard was evaluated in a number of in vitro as well as in vivo measurements. Method： The experiments were performed on 3T MEDINUS MAGNUM MR-scanner using a STEAM sequence.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.533-536
• /
• 2004

This study aims to manufacture and to evaluate lightweight cement composite using lightweight aggregate and expanded perlite. The expanded perlite and lightweight aggregates were mixed with cement, water, SP(superplasticizer), forming-agent and poly-propylene fiber. The specimens were cured at $20^{\circ}C$ for 24h and then at steam curing of $60^{\circ}C$, RH $100\%$ for 12h. As a result, We could make lightweight cement composite of satisfaction about ALC properties. However it is need to improve the properties of density and water absorption.

• Nuclear Engineering and Technology
• /
• 제39권4호
• /
• pp.249-256
• /
• 2007

Light water reactors operated under supercritical pressure conditions have been selected as one of the promising future reactor concepts to be studied by the Generation IV International Forum. Whereas the steam cycle of such reactors can be derived from modem fossil fired power plants, the reactor itself, and in particular the reactor core, still need to be developed. Different core design concepts shall be described here to outline the strategy. A first option for near future applications is a pressurized water reactor with $380^{\circ}C$ core exit temperature, having a closed primary loop and achieving 2% pts. higher net efficiency and 24% higher specific turbine power than latest pressurized water reactors. More efficiency and turbine power can be gained from core exit temperatures around $500^{\circ}C$, which require a multi step heat up process in the core with intermediate coolant mixing, achieving up to 44% net efficiency. The paper summarizes different core and assembly design approaches which have been studied recently for such High Performance Light Water Reactors.