• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.15-20
• /
• 2010

In this paper, we discuss a decentralized observer design problem for the fault detection in the large-scale continuous-time T-S (Takagi-Sugeno) fuzzy system. Since the fault detection residual is desired to be as sensitive as possible, on the fault, we use $\mathfrak{H}_-$ index performance criterion. Sufficient conditions for the existence of such a observer is presented in terms of linear matrix inequalities. Simulation results show the effectiveness of the proposed method.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.5
• /
• pp.629-639
• /
• 2010

To evaluate the performance of high rate coagulation system(HRCS) for CSOs treatment, fundamental function of lab scale HRCS has been tested by using the Jar tester and lab scale HRCS. The optimum pH dose by Streaming Current value was found in the range of 5.3~6.0 in Fe(III), and in the range of 5.8~6.6 in Al(III) and the optimum chemical dose were 0.44mM of $Al_2(SO_4)_3$ and 0.93mM of $FeCl_3$. The removal efficiencies at optimum $Al_2(SO_4)_3$ dose were 75%($TCOD_{Cr}$), 97%(TP), 95%(SS) and 96%(turbidity), respectively. And the removal efficiency of particles with less than $5{\mu}m$ of diameter was 70% and that of particles with higher than $5{\mu}m$ of diameter was 90%. The optimum alum dose in lab scale HRCS was 150mg/L, and the treatment efficiency was the best with addition of 1.0mg/L polymer. The effect of Micro sand addition was not clear, because the depth of the sediment tank in lab scale HRCS was not long enough. But the HRT of this lab scale HRCS was able to be shorten less then 7 minutes by adding the micro sand. The surface loading rates with respect to using different chemicals were 0.43m/h with alum only, 5.78m/h with alum and polymer and 6.22m/h with alum, polymer and micro sand. As a result, HRCS using coagulant, polymer and micro sand developed in this study was evaluated to be very effective for CSOs treatment.

• Journal of Environmental Science International
• /
• v.20 no.4
• /
• pp.501-509
• /
• 2011

Unlike many laboratory-scale studies on absorption of organic compounds (VOCs), limited pilot-scale studies have been reported. Accordingly, the present study was carried out to examine operation parameters for the effective control of a hydrophilic VOC (methyl ethyl ketone, MEK) by applying a circular pilot-scale packed-absorption system (inside diameter 37 cm ${\times}$ height 167 cm). The absorption efficiencies of MEK were investigated for three major operation parameters: input concentration, water flow rate, and ratio of gas flow-rate to washing water amount (water-to-gas ratio). The experimental set-up comprised of the flow control system, generation system, recirculation system, packed-absorption system, and outlet system. For three MEK input concentrations (300, 350, and 750 ppm), absorption efficiencies approached near 95% and then, decreased gradually as the operation time increased, thereby suggesting a non-steady state condition. Under these conditions, higher absorption efficiencies were shown for lower input concentration conditions, which were consistent with those of laboratory-scale studies. However, a steady state condition occurred for two input concentration conditions (100 and 200 ppm), and the difference in absorption efficiencies between these two conditions were insignificant. As supported by an established gas-liquid absorption theory, a higher water flow rate exhibited a greater absorption efficiency. Moreover, as same with the laboratory-scale studies, the absorption efficiencies increased as water-to-gas ratios increased. Meanwhile, regardless of water flow rates or water-to-gas ratios, as the operation time of the absorption became longer, the pH of water increased, but the elevation extent was not substantial (maximum pH difference, 1.1).

• Journal of Acupuncture Research
• /
• v.18 no.2
• /
• pp.1-17
• /
• 2001

Background and Objetive : Lack of uniformity in reporting facial nerve recovery in patients with facial nerve paralysis has been a major disadvantage in comparing treatment modalities. The objective evaluation of facial nerve function is a complex procedure. The House and Brackmann grading system, the Yanagihara grading system has been recommend as a universal standard for assessing the degree of facial nerve palsy. However, clinical studies for treatment of facial palsy have rarely used this universal standard in oriental medicine. That is the reason for analysing this facial nerve grading system. Material and Method : We choose 10 scales reported from 1955 till 1995. These facial nerve grading systems may be classified as Gross system, Regional system and Specific system. Result and Conculsion : The scales of Botmann and Jonkees, May, Peitersen, and House and Brackmann are the gross facial nerve grading systems with which we grossly assess the facial motor dysfunction and the secondary defect. Among these scales, H-B scale is the most widespred The scales of Yanagihara(若杉文吉), Smith, Adour and Swanson, Jassen, FEMA are the regional facial nerve grading system in which we weight, or unweight the facial motor dysfunction and the secondary defect. For example, the scales of Yanagihara(若杉文吉) and Smith are the unweighted regional scale, the scale of Adour and Swanson, Jassen, FEMA are the weighted regional grading system. The scale of Stennert is the Specific facial nerve grading system in which we respectively assess the grade of facial dysfunction at rest, in motion and the secondary defect. For the objective evaluation of the oriental medicine treatment for facial palsy, we must use the universal standard scale, i.e. the H-B scale, the Yanagihara scale.

• KSBB Journal
• /
• v.21 no.2
• /
• pp.103-109
• /
• 2006

For the study of Hericium erinaceum as a useful functional foods and materials, liquid cultivation under two different bioreactors(air-lift fermenter and jar fermenter) which was not studied systematically until now, was conducted as a method of mass cultivation for H. erinaceum. A batch cultivation in an air-lift fermenter and a jar fermenter was examined for enhancing the productivity because of small amounts of mycelial weight and slow growth in case of a liquid culture for H. erinaceum. We found that air lift fermenter system was more effective than jar fermenter for mycelial production of H. erinaceum, and mycelial morphology was a critical factor of the growth. By scale-up and cultivation based on morphological analysis, the conditions for mass production with 30 L and 500 L jar fermenter was 200 and 150 rpm of agitation speed at 1 vvm of aeration rate, respectively, and mycelial dry weight under these conditions was enhanced to about $13{\sim}14g/L$.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.35 no.2
• /
• pp.111-117
• /
• 2017

Mulberry leaves containing 1-deoxynojirimycin (DNJ) known to be a strong inhibitory effect for ${\alpha}-glucosidase$. Thus, DNJ has been recognized as a potentially important source for prevent or treat hyperglycemia. More effective method for the DNJ high-production is needed because DNJ content of natural mulberry leaf are as low as 0.1%. Many researchers have studied for the DNJ high-production in mulberry leaves such as the harvest season, fermentation using microorganisms, optimal culture conditions, and optimal extraction conditions. In order to provide for useful data that is anticipated at the level of industrial scale, we investigated ${\alpha}-glucosidase$ inhibitory activity, pH value and DNJ content in large-scale based on the optimal culture conditions for mulberry leaf fermentation of small-scale in our previous study. The ${\alpha}-glucosidase$ inhibitory activity, pH value, and DNJ content in this study were measured from the mulberry leaf fermentation broth for 7 days. During mulberry leaf fermentation, the ${\alpha}-glucosidase$ inhibitory activity and DNJ content was increased until 2 to 4 days, but after 4 day was decreased. The pH value showed a decreasing trend up to 2 day, and little changes in 2 to 4 days. However, the pH was started to increase after 4 days.