• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 춘계학술발표대회
• /
• pp.860-863
• /
• 2012

본 논문에서는 지각의 실시간 측량과 데이터 수집을 위해 Gyro Sensor기반의 전자기준점 시스템을 제안한다. 이를 위해 GPS 모듈, 환경 센서 및 Gyro Sensor를 이용하여 측량값을 데이터화하고 데이터값을 CDMA 모듈 방식을 이용해 데이터베이스 서버로 전송한다. 또한 측정값을 사용자 기반의 시스템 GUI를 구현함으로써 실시간으로 모니터링이 가능하도록 구현하였다.

• 한국산업융합학회 논문집
• /
• 제22권4호
• /
• pp.459-465
• /
• 2019

There is an increasing interest in health and research on methods for measuring human body information. The importance of continuously observing information such as the step change and the walking speed is increasing. At a person's gait, information about the disease and the currently weakened area can be known. In this paper, gait is measured using wearable walking module built in shoes. We want to make continuous measurement possible by simplifying gait measurement method. This module is designed to receive information of gyro sensor and acceleration sensor. The designed module is capable of WiFi communication and the collected walking information is stored in the server. The information stored in the server is corrected by integrating the acceleration sensor and the gyro sensor value. A band-pass filter was used to reduce the error. This data is categorized by the Gait Finder into walking and waiting states. When walking, each step is divided and stored separately for analysis.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.2021-2032
• /
• 1992

본 연구에서는 이동 로보트의 구동모터들의 회전수를 측정하는 두 개의 엔코 더와 로보트의 회전각 속도를 측정하는 자이로센서를 결합하여 주행중인 로보트의 자 세를 정확하게 추정할 수 있는 복수센서 시스템의 신호처리회로 및 알고리즘을 개발하 고 자이로센서의 측정방정식을 모델링하기 위하여 성능시험을 수행하였다. 그리고 확률이론을 유도된 측정방정식에 적용하여 본 복수센서 시스템의 출력 신호들을 효율 적으로 융합할 수 있는 센서데이터 융합알고리즘을 개발하여 사용된 측정센서들에 내 재하는 측정오차의 영향을 최소로 줄이고자 하였다. 제안된 융합알고리즘의 타당성 을 검증하기 위하여 주행실험을 수행하여 이동 로보트의 실제자세와 본 융합알고리즘 의 결과를 비교하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.177.2-177
• /
• 2001

The asynchronous gyro outputs in the 3-axis navigation system are defined as each of gyros has its own output frequency. In this case, the navigation system has gyro outputs concurrently with the sensor mechanical frequency instead of the attitude frequency. So, there is an asynchronous error between gyro outputs and attitude calculation. In this paper, we analyze the gyro output error caused by the asynchronous gyro and present the high speed sampling technique and the extrapolation and interpolation of gyro outputs for synchronizing the gyro outputs.

• 항공우주기술
• /
• 제10권2호
• /
• pp.49-55
• /
• 2011

인공위성에 사용되는 센서들의 장착 방향은 보통 방향코사인행렬로 구현되어 있다. 이 방향코사인행렬의 극성검증을 위해서는 센서에 알고 있는 외부 자극을 인가하여 출력되는 응답을 확인하는 방법이 사용된다. 그러나 자이로 센서의 경우에는 인위적인 외부 자극 없이 지구 자전에 의한 회전각속도가 방향코사인행렬의 극성검증을 위한 입력으로 사용될 수 있다. 본 연구에서는 인공위성의 조립 및 시험 단계에서 여러 번 수행되는 자이로 센서의 상태점검 시험결과를 이용하여 자이로 센서의 방향코사인행렬 극성검증을 수행하였다.

• International Journal of Advanced Culture Technology
• /
• 제11권1호
• /
• pp.370-375
• /
• 2023

As we enter a super-aged society, studies are being conducted to reduce complications and deaths caused by falls in elderly adults. Research is being conducted on interventions for preventing falls in the elderly, wearable devices for detecting falls, and methods for improving the performance of fall detection algorithms. Wearable devices for detecting falls of the elderly generally use gyro sensors. In addition, to improve the performance of the fall detection algorithm, an artificial intelligence algorithm is applied to the x, y, z coordinate data collected from the gyro sensor. In this paper, we develop a wearable device that uses a gyro sensor, body temperature, and heart rate sensor for health management as well as fall detection for the elderly. In addition, we develop a fall detection and health management system that works with wearable devices and a guardian's mobile app to improve the performance of the fall detection algorithm and provide health information to guardians.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권2호
• /
• pp.65-67
• /
• 2006

To make the autonomous mobile robot move in the unknown space, we have to know the information of current location of the robot. So far, the location information that was obtained using Encoder always includes Dead Reckoning Error, which is accumulated continuously and gets bigger as the distance of movement increases. In this paper, we analyse the effect of the size of the two wheels of the mobile robot and the wheel track of them among the factors of Dead Reckoning Error. And after this, we compensate this Dead Reckoning Error by Kalman filter using Gyro Sensors. To accomplish this, we develop the controller to analyse the error components of Gyro Sensor and to minimize the error values. We employ the numerical approach to analyse the error components by linearizing them because each error component is nonlinear. And we compare the improved result through simulation.

• 센서학회지
• /
• 제19권4호
• /
• pp.278-284
• /
• 2010

Indoor localization for pedestrian is the key technology for caring the elderly, the visually impaired and the handicapped in health care districts. It also becomes essential for the emergency responders where the GPS signal is not available. This paper presents newly developed pedestrian localization system using the gyro sensors, the magnetic compass and pressure sensors. Instead of using the accelerometer, the pedestrian gait is estimated from the gyro sensor measurements and the travel distance is estimated based on the gait kinematics. Fusing the gyro information and the magnetic compass information for heading angle estimation is presented with the error covariance analysis. A pressure sensor is used to identify the floor the pedestrian is walking on. A complete ambulatory system is implemented which estimates the pedestrian's 3D position and the heading.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.592-595
• /
• 2004

This paper presents a study on the development of a multi-sensing inertial sensor with a single mechanical structure, which can be used both as a gyroscope and an accelerometer. The proposed MEMS gyro-accelerometer is designed to detect the angular rate and the acceleration at the same time using two separate detection circuits for one proof mass. In this study, the detection and signal processing circuit for an effective signal processing of different inertial measurements is designed, fabricated, and tested. The experimental results show that the performances of the gyro-accelerometer have resolutions of 1mg and 0.025deg/sec and nonlinearities of less than 0.5% for the accelerometer and the gyroscope, respectively, which are similar results with those of sensors with different structures and different detection circuits. The size of the sensor is reduced almost by 50% comparing with the sensors of separated proof mass.

• International Journal of Control, Automation, and Systems
• /
• 제2권4호
• /
• pp.536-541
• /
• 2004

It is important to estimate and calibrate sensor errors in maintaining the performance level of SDINS. In this study, an estimation technique of fixed sensor errors for SDINS calibration is discussed. First, the fixed errors of gyros and accelerometers, excluding gyro biases are estimated by the navigation information of SDINS in multi-position. The SDINS with RLG includes flexure errors. In this study, the gyros flexures are out of consideration, but the proposed procedure selects certain positions and rotations in order to minimize the influence of flexures. Secondly, the influences of random walks, flexures and orientation errors are verified via numerical simulations. Thirdly, applying the previous estimated errors to SDINS, the estimation of gyro biases is conducted via the additional control signals of close-loop self-alignment. Lastly, the experiments illustrate that the extracted calibration parameters are available for the improvement of SDINS.