• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.5
• /
• pp.135-145
• /
• 2010

This study was carried out to investigate the current urban forest network and future plan of forest framework using nearest features program where stepping stones within 5km from the core forest were selected in the program. We found several conclusions as follows: First, we found that cities in inland area including Daegu, Dajeon and Gwangju have quite different types of forest network with comparing to the cities nearby coastline including Busan, Incheon and Ulsan. The cities in inland area have large mountain patch around each city. However they have small and lower number of island forests within their urban area. Otherwise, cities nearby coastline have more forest patches than in the cities in inland area, and Busan and Incheon especially have strong forest network using various size of forest patches. Second, Daegu and Daejeon have much smaller forest patches distributed in each urban area. So additional forest patches should be added to have highly strong forest network within urban area. Third, Ulsan and Gwangju have most stepping-stone forests close to the large mountain patches in suburban area, which are not able to connect to the forest patches in the central area of each city So additional forest patches are needed to be added in the central area of each city for reinforcing the effect of stepping stone in the central area. Though there should be an addition approach except for forest size and its isolation to construct the ecological network in an urban area, this indices can be a good method to check an environmental and ecological status in an urban area.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.2
• /
• pp.39-46
• /
• 2020

Composite electrodes for rechargeable batteries generally consist of active material, electric conductor, and polymeric binder. And their composition and distribution within the composite electrode determine the electrochemical activity in the electrochemical systems. However, it is not easy to quantify the physical properties of composite electrodes themselves using conventional experimental analysis tools. So, 3D structural modeling and simulation can be an efficient design tool by looking into the contact areas between particles and electric conductivity within the composite electrode. In this study, while maintaining the composition (LiCoO₂ : Super P Li^® : Polyvinylidene Fluoride (PVdF) = 93 : 3 : 4 by wt%) and loading level (13 mg cm^-2) of the composite electrode, the effects of LiCoO₂ size (10 ㎛ and 20 ㎛) and electrode density (2.8 g cm^-3, 3.0 g cm^-3, 3.2 g cm^-3, 3.5 g cm^-3, 4.0 g cm^-3) on the physical properties are investigated using a GeoDict software. With this tool, the composite electrode can be efficiently designed to optimize the contact area and electric conductivity.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.357-364
• /
• 2016

The objective of this study was to efficiently produce forage crop seed of spring oat (Avena sativa L., cultivar High Speed) in Gyeongbuk area. Forage crop oats (130 kg/ha) were sown with a randomized block design. They were sown in triplicates in 2015 and 2016 using basal fertilizer of 70 kg N, 74 kg P, and 39 kg K/ha. Agronomic traits and seed production of oats were investigated to determine the influence of seeding dates (February 28/29th, March 10th, and March 20th). Heading, flowering, and maturing dates of these oats sown on February 28/29th and March 10th were almost close to each other with 1-2 days of difference for all test plots. For oats sown on the last day (28/29) of Feb., plant heights (111.6-122.6 cm) were significantly longer than those sown in March each year. In addition, panicle number ($416.7per\;m^2$) and panicle length (17.3 cm) of oats sown on the last day of February were also significantly (p < 0.05) larger than those of oats sown in March in 2015 and 2016, respectively. Based on these results, it is recommended to sow these oats on the last day of February to have better agronomic traits in terms of plant height, stem length, panicle length, and panicle number $per\;m^2$. Grain numbers (56.3 and 63.3) and kernel weights (1.72 and 2.00 g) per spike in plots of oats sown on the last day of February were also significantly (p < 0.05) larger than those of oats in other plots in 2016 and in the average of 2015~2016, respectively. The highest grain yield (6,243 kg/ha) was obtained when oats were sown on the last day of February. Feed value of harvested oats was good in terms of proximate compositions including fiber contents and TDN contents. In conclusion, sowing on the last day of February is the most effective way to increase seed production of spring oats in Gyeongbuk area of Korea.

• KCID journal
• /
• v.18 no.2
• /
• pp.111-121
• /
• 2011

This study is to estimate the possible damage area of greenhouse by heavy snowfall event using terra MODIS snow cover area (SCA) and the ground measured snowfall data (GMSD). For the 4 heavy snowfall events of January 2001, March 2004, December 2005 and January 2010, the areas exceeding the design criteria of snowfall depth for greenhouse breaking were extracted by coupling the MODIS SCA and GMSD. The main damaged regions were estimated as Gangwon province in 2001, Chungbuk and part of Gyeongbuk province in 2004, Jeonbuk and Jeonnam province in 2005, and Gangwon and part of Gyeonggi province in 2010 respectively. Comparing with the investigated number of greenhouse damaged data, the estimated areas reflected the statistical data except 2001. The 2001 greenhouse damages were caused by the high wind speed (35.7m/sec) together with snowfall. The results of this study can be improved if the design criteria of wind speed is added.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.3
• /
• pp.438-451
• /
• 2018

This study analyzed differences in awareness, attitude, and purchase intention for multi-brand stores among fashion lifestyle groups. A questionnaire survey was conducted between September 12th and September 30th 2016 with women in their 20s to 40s living in the Seoul metropolitan area, Busan, Gyeongnam area, Daegu, and Gyeongbuk area. Data were collected from 417 women and analyzed using factor analysis, cluster analysis, analysis of variance and a Duncan test. The results of this study are summarized as follows. First, the result of factor analysis showed that fashion lifestyle was divided into five factors such as individuality orientation, practicality orientation, conspicuous orientation, fashion orientation, and economic orientation. The respondents were classified into economic pursuit group, individuality seeking group, active fashion seeking group and practicality seeking group according to fashion lifestyle factors. Second, there were significant differences in awareness, attitude, and purchase intention of multi-brand stores among fashion lifestyle groups. Fashion seeking group was more aware of, had a positive attitude toward, and purchased more fashion products in multi-brand stores than other groups.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.126-135
• /
• 2011

In this study, the algorithm for priority area of forest fire surveillance was developed to enhance the effectiveness of fire detection. The high priority surveillance area for forest fire detection was defined as the area with not only low value of viewshed analysis of the lookouts and detection cameras but also high fire occurrence probability. To build the priority map, fuzzy function and map algebra were used. The analysis results of Bonghwa-gun, Gyeongbuk Province, showed that the surveillance priority of central and southern area is higher than north area. This algorithm could be used in the allocation of fire prevention resources and selection of suitable point for new fire detection system.

• Journal of Urban Science
• /
• v.9 no.2
• /
• pp.21-30
• /
• 2020

The purpose of this study is to present a plan to distinguish 229 local governments nationwide by taking into account various characteristics such as population, employment, housing, and industry of the region for customized urban policies in the era of metropolitan areas. The National Statistical Portal (KOSIS) collected and standardized data related to population, housing, industry, and finance by region from 2000 to 2015 for the classification of regional types necessary for customized urban policies, and this was used to classify them into regional types that considered population, employment, housing and industry. The summary of the analysis results is as follows. First, as a result of the regional type classification, 10 key employment sites (4.4%), 5 employment centers (2.2%), 38 residential centers (16.6%), 20 growth areas (8.7%), 26 industrial cities (11.4%), 35 low-fertile farming and fishing villages (15.3%) and 95 stagnant areas (41.5%). Second, the Seoul metropolitan area is the most diverse type of metropolitan area in the country, with most of its core employment sites inside Seoul, residential centers inside and outside Seoul, and growth areas in the southeastern part of the country (Busan, Ulsan, and Gyeongsangnam-do) are mixed with industrial and growth areas centered around Busan, Ulsan and surrounding areas, while the rest of the local governments are found to be low-fertile farming villages or stagnant areas. Daegu (Daegu, Gyeongbuk) is an industrial city in Daegu, and the rest of the local governments are either low-density farming and fishing villages or stagnant areas. The Honam region (Gwangju and Jeolla) was found to be a low-mill farming and fishing village or stagnant area except for Gwangju, while the Chungcheong region (Daejeon, Sejong, and Chungcheong) was seen as a growth area with areas adjacent to Daejeon, Sejong, and the Seoul metropolitan area, and some industrial cities were included. Finally, the Gangwon area was mostly classified as low-density farming and fishing villages and stagnant areas.

• Korean Journal of Agricultural Science
• /
• v.49 no.2
• /
• pp.203-214
• /
• 2022

A model is developed for estimating optimal cultivation areas for apples to maximize the total profit of apple farming by region, focusing on Gyeongsangbuk-do, Chungchungbuk-do, Gyeongsangnam-do, and Jeonllabuk-do in Korea. Comparing the current cultivation areas to the optimal areas according to the model estimation during the period 1999 - 2019, the former has exceeded the latter since 2015 in all regions except for Jeonllabuk-do. This result stems from a lack of the regulation of production quantity among apple producers' regional organizations. Accordingly, the decreasing rate of the market price was greater than the increasing rate of the production quantity, and the total profit of apple farming has fallen in conjunction with increasing agricultural wage rates. Therefore, in order to reverse the current decreasing trend in the profits of apple farming, it is necessary to regulate nationwide apple cultivation areas through regional producers' associations. Ex-ante forecasting for 2019 posits the following regional optimal cultivation areas for maximizing the total income from apple farming. The Gyeongbuk apple producers' association needs to reduce its current cultivation area by 1,089 ha and to maintain 18,373 ha. In the Chungbuk region, current cultivated area should be reduced by 1,027 ha to maintain 2,722 ha, and in the Gyeongnam region, the current cultivated area should be reduced by 582 ha to maintain 2,730 ha. In contrast, the Jeonbuk region needs to increase its current cultivation area by 174 ha and to maintain at a level of 2,872 ha.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.20-28
• /
• 2007

Zigbee sensor network base on IEEE802.15.4 has local address of 2 byte on transmit packet data which is pick up the address for each sensor node. Sensor network is requested low power, low cost, many nodes at hues physical area. There for Zigbee is very good solution supporting for next Ubiquitous generation but the Zigbee sensor network has address allocation problem of each sensor node. Is established standard from Zigbee Alliance, to the address allocation method uses Cskip algorithm. The Cskip algorithm use the hazard which allocates an address must blow Hop of the maximum modification and child node number. There is to address allocation and from theoretically it will be able to compose a personal 65536 sensor nodes only actual with concept or space, only 500 degree will be able to compose expansion or the low Zigbee network. We proposed an address allocation method using coordinate value for Zigbee sensor network.

• Korean Journal of Community Nutrition
• /
• v.11 no.3
• /
• pp.374-382
• /
• 2006

The purpose of the study was to investigate the effects of the characteristics of dietitians, the characteristics of school food services, equipment ratio of HACCP facility/equipment and perception of barriers to HACCP implementation on external and internal audit of food safety/sanitation management performance in school food service. An e-mail survey was conducted with 144 dietitians in Gyeongbuk Province. A response rate was 57.6% (N = 83) and data was analyzed using SPSS windows (ver. 12.0). Dietitian perceived facilities/equipment-related and stakeholder-related as the big barriers in implementing a HACCP system. Total scores of sanitation/safety management performance for external and internal audit were similar at 92 and 91 out of 100, respectively. 'Facilities/equipment' and 'HACCP system' categories in both external and internal audit were rated the lowest. As dietitian perceived facilities/equipment-related (p < 0.001) and stakeholder-related (p < 0.05) barriers to HACCP implementation were greater, the scores of the external and internal audits were significantly lower. As dietitian perceived barriers for all categories were greater, the scores of internal audits were significantly lower (p <0.05). As a result of multiple regression analyses, the scores of the external audit was positively associated with career as a school food service dietitian, but was negatively associated with barriers related to facility/equipment, while the scores of the internal audit was negatively associated with barriers related to facility/equipment and employees. This study suggests that supporting programs on securing the facilities/equipment and employee training are needed for successful HACCP implementation in school food service.