• Preventive Nutrition and Food Science
• /
• v.18 no.3
• /
• pp.218-221
• /
• 2013

Korean cabbage, a member of the Brassicaceae family which also includes cauliflower, mustard, radish, and turnip plants, is a crucial leafy vegetable crop. Korean cabbage is harvested after completion of the leaf heading process and is often prepared for use in "baechu kimchi", a traditional Korean food. Many of the components in Korean cabbage are essential for proper human nutrition; these components can be divided into two groups: primary metabolites, which include carbohydrates, amino acids, fatty acids, and organic acids, and secondary metabolites such as flavonoids, carotenoids, sterols, phenolic acids, alkaloids, and glucosinolates (GSLs). Using gas chromatography-mass spectrometry, this study examined the variety of volatile compounds (including isothiocyanates) contained in Korean cabbage and its seed, which resulted in the identification of 16 and 12 volatile compounds, respectively. The primary volatile compound found in the cabbage was ethyl linoleolate (~23%), while 4,5-epithiovaleronitrile (~46%) was the primary volatile component in the seed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.95-98
• /
• 2003

Tin doped indium oxide(ITO) films, which is widely used as a transparent conductor in optoelectronic devices such as solar cell, liquid crystal display, plasma display panel, thermal heater, and other sensors, were prepared by using the capacitively coupled DC magnetron sputtering method. The influence of the substrate temperature, working gas pressure and deposition time on the electrical, optical and morphological properties were investigated experimentally. ITO films with the optimum growth conditions showed resistivity of $2.36{\times}10^{-4}(\Omega}-cm$ and transmittance of 86.28% for a film 680nm thick in the wavelength range of the visible spectrum.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.109-113
• /
• 2005

NOx, Soot and other exhausted components already became a dangerous state as principal materials of the air pollution. Therefore, the exhausted regulations are getting strict in the many countries. In this paper, reduction characteristic of NOx Soot and CO from diesel engine are investigated when MF plasma system is put to the diesel engine. NOx is decreased in all measured load and applied voltage to plasma reactor.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1171-1177
• /
• 2011

A high power laser beam focused on a small area accelerates a thin material that flies and hits other target material in which a shock wave may be induced. This laser induced shock experimental method is more repeatable and cheaper but worse than other experimental method using gas gun or other apparatus. An optical system including a phase zone plate reduces the interference and also makes the focused-beam-intensity distribution uniform. We wrote a computer code that calculates light ray traces. Using the code we designed and fabricated an optical system including a phase zone plate and improved the laser-beam uniformity. We introduce preliminary experimental results of laser induced shock of the samples such as aluminum and other materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.173-176
• /
• 2004

Silicon thin films on p-type(100) silicon substrate have been prepared by a pulsed laser deposition(PLD) technique using a Nd:YAG laser. The pressure of the environmental gas during deposition was 1 Torr. After deposition, silicon thin film has been annealed in nitrogen ambient. Strong blue photoluminescence(PL) has been observed at room temperature. We report the optical properties of silicon thin films with the variation of the deposition parameters.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.255-258
• /
• 2004

In order to provide a useful data for combustion chamber design, a numerical analysis for spray combustion of liquid fuel and oxidizer in combustion chamber has been conducted. High temperature nitrogen gas in low speed has been conveyed for the ignition of the liquid fuel and oxidizer mixture. Temperature and velocity distributions affected by characteristics of liquid fuel and oxidizer combustion have been investigated.

• Archives of Pharmacal Research
• /
• v.6 no.1
• /
• pp.7-16
• /
• 1983

A methadone-diazepam interaction study in rats was performed in which conjugated metabolites of methadone were analyzed using deuterated biosynthetic internal standards. Diazepam (5mg/kg) was given to rats through a cannulate djugular vein and a subcutaneous dose of methadone (10mg/kg) was given. Bile was collecte through the cannulate dbile duct over a period of 24 hours. The deuterium label of the internal standards was found to be stable under conditions of the prolonged incubation. There was no significant difference in the excretion of the metabolites between the control and the diazepam treated rats. Feasibility of using biosynthetic internal standards with selected ion monitoring was established for the drug metabolism and kinetic studies.

• Journal of Environmental Science International
• /
• v.30 no.10
• /
• pp.879-889
• /
• 2021

This study characterizes the volatile aromatic and metabolite components of domestic native Apocynum lancifolium blossom. The accurate characterization of fragrances collected from the blossom was carried out using gas chromatography-mass. A total of 70 chemical components were identified, including ketones of acetophenone (29.22%), phenylethyl alcohol (10.54%), methyl-benzenemethanol (8.43%), benzyl alcohol (7.97%), natural bicyclic sesquiterpene types of caryophyllene (6.08%), gurjunene (6.20%), humulene (1.90%), and ocimene (1.04%). Overall, the content of ketones, alcohols, and terpenes was higher than that of others. The major metabolite components were pentanoic acid, malic acid, fructofuranoside, quinic acid, tagatose, sorbose, galactose, inositol, galactaric acid, glucopyranoside, and octadecenoic acid.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.211-216
• /
• 2000

In this paper, experimental investigations were carried out to remove NOx, SOx simultaneously from a simulated combustion flue gas [$NO(0.02%)-SO_2(0.08%)-CO_2-Air-N_2$] by using a pulse corona induced plasma chemical processing. Discharge domain of wire-cylindrical plasma reactor was separated from a gas flow duct to avoid unstable discharge by aerosol particle deposited on discharge electrode and grounded electrode. The NOx, SOx removal was experimentally investigated by a reaction induced to ammonium nitrate, ammonium sulfate using a low price of aqueous NaOH solution and a small quantity of ammonia. Volume percentage of aqueous NaOH solution used was 20% and $N_2$ flow rate was $2.5{\ell}/min$ for bubbling aqueous NaOH solution. Ammonia gas(l4.82%) balanced by argon was diluted by air and was introduced to a main simulated flue gas duct through $NH_3$ injection system which was in downstream of reactor. The $NH_3$ molecular ratio(MR) was determined based on [$NH_3$] and [$NO+SO_2$]. MR is 1.5. The NOx removal rates increased in the order of DC, AC and pulse, but SOx removal rates was not significantly effected by source of electricity. The NOx removal rate slightly decreased with increasing initial concentration. but SOx removal rate was not significantly affected by initial concentration. The NOx, SOx removal rates decreased with increasing gas flow rate.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.374-381
• /
• 1997

Ceramic membranes are prepared by using molding method of the glass materials, ceramic-silicone composite membranes are synthesized with immersing silicone compound of sodiumate, $S_3$-Al, S3and we investigated the properties of gas permeation. Ceramic membranes and ceramic-sodiumate membranes that has been prepared were identified as porous structure and ceramic-$S_3$-Al membranes and ceramic-$S_3$ membranes were showed with dense structure by immersion of silicone compounds. Gas permeation properties through the ceramic membranes and ceramic-sodiumate membranes decreased with increasing temperature and linearly increased with increasing pressure, ceramic-$S_3$-Al membranes and ceramic-$S_3$ membranes increased with increasing temperature and pressure effect was low. Permeation rate was found out high value with ceramic membranes and in order of ceramic-sodiumate membranes, ceramic-$S_3$-Al membranes and ceramic-$S_3$ membranes, but selectivity reversed in the order. Gas permeation mechanism through the ceramic membranes and ceramics-sodiumate composite membrane decreased with increasing temperature, suggesting an Knudsen diffusion mechanism, but ceramic-$S_3$-Al composite membranes and ceramic-$S_3$ composite membranes showed an activated diffusion by which gas permeation rates through the membranes increased with an increase in temperature.