• 한국기계가공학회지
• /
• 제15권1호
• /
• pp.34-41
• /
• 2016

Bar camber is a phenomenon in which a material with a deformation gradient across its width is bent in the right or left direction in the roll gap. This paper proposes a dynamic setup approach for a side guide for reducing bar camber. A bar tracking scheme using a rotary encoder was adopted to fix an operation point for the side guide. The guiding pressure was utilized for measuring the actual width of the bar with camber. Based on the accurate position and width of the bar, the side guide was dynamically set and operated at the actual roughing train in a hot strip rolling mill. The amount of camber was reduced notably when the dynamic setup scheme was installed in the side guide. 78% of the bars tested had a camber in the range of ${\pm}20mm$, which was an improvement of 27% in terms of production yield.

• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.130-136
• /
• 1997

The velocity distrubution at the exit of extrusion die depends on the width of bearing land very much. When uniform bearing land without flow guide is used, the material which is extended through the same die does not, deflect to the constant direction, but when the flow guide is equipped and then the volume compensation is done accurately, the material deflects to one constant direction. Therfore, the part of problem can be known exactly, and extrusion products of straight shape can be produced by the corrected bearing land width.

• 설비공학논문집
• /
• 제20권4호
• /
• pp.238-244
• /
• 2008

This study investigates on the improvement of inhalation effect of hood which attached new device named as "gas-guide-device" in local exhaust ventilation system for the effective elimination of harmful material and dust in manufacturing factory. The gas-guide-device having a diamond shape is composed of width (b) and two sides of a device (X, Y) and its size is selected the industrial hood under application in manufacturing factory after due consideration. In order to investigate the effect of gas-guide-device, numerical and experimental study is performed that the flow velocity is calculated and is measured by a commercial program "COMSOL $Multiphysics^{TM}$" and a hot wire type of anemometer, respectively. The numerical and experimental results are revealed is a similar pattern and flow velocity has improved to hood attached gas-guide-device. Also, the numerical method and result is also verified the dependance. Moreover, the optimum shape and size of gas-guide-device is revealed that the width (b) and the ratio of two sides of gas-guide-device (X, Y) has 125mm and 4 to 6.

• 한국통신학회논문지
• /
• 제25권7A호
• /
• pp.1057-1062
• /
• 2000

Allow me to introduce the development of an FM transmitter. The transmitter uses millmeter waves at the frequency of 60 GHz, and it can produce as much as 20 mW power with the band width of 1 GHz. The great feature of the FM transmitter is that it has been created by the special technique of utilizing the NRD (non radiative dielectric) waveguide. The advantage of adopting the NRD waveguide is that it can significantly reduce transmission loss. We can construct a small-size NRD guide transmitter in a simple way that has superb transmission performance. The NRD guide transmitter is very useful for CATV transmission or transmission over a wide range. In addition, the transmitter has almost the same band width as optical communication, and the data transmission speed of the transmitter is faster than that of optical communication. A transmitter with these merits would be highly appreciated as a way of ultra-highspeed communication network over short distances.

• 대한인간공학회지
• /
• 제18권1호
• /
• pp.41-53
• /
• 1999

The effect of menu width and depth on the efficiency of information search and menu preference was investigated to identify an optimal menu structure for EIG which reflects the characteristics of human information processing. Information search time increased stepwisely as the menu width exceeded 6 items and linearly as the level of menu depth increased. The linear relationship between the error rate and the number of depth levels seems to be caused by the increase in the items to be remembered. When a menu structure was constructed by combining different menu depths and widths, it was observed that making the menu width wider rather than the depth deeper allows better information search. The menu structure rated as the most preferable and the easiest to user was that of pyramidal form. Such a result seems to come from its structural similarity to general categories which people get used to and implies that one should consider user preference as well as efficiency of search when he/she designs an EIG menu.

• Restorative Dentistry and Endodontics
• /
• 제49권2호
• /
• pp.21.1-21.8
• /
• 2024

Objectives: This paper aims to serve as a useful guide for sample size determination for various correlation analyses that are based on effect sizes and confidence interval width. Materials and Methods: Sample size determinations are calculated for Pearson's correlation, Spearman's rank correlation, and Kendall's Tau-b correlation. Examples of sample size statements and their justification are also included. Results: Using the same effect sizes, there are differences between the sample size determination of the 3 statistical tests. Based on an empirical calculation, a minimum sample size of 149 is usually adequate for performing both parametric and non-parametric correlation analysis to determine at least a moderate to an excellent degree of correlation with acceptable confidence interval width. Conclusions: Determining data assumption(s) is one of the challenges to offering a valid technique to estimate the required sample size for correlation analyses. Sample size tables are provided and these will help researchers to estimate a minimum sample size requirement based on correlation analyses.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.402-403
• /
• 2018

차량용 근거리레이다에서 사용하는 70GHz대역 고이득 배열안테나를 설계하고 제작하였다. 근거리 레이다에서는 분해능을 높이기 위해서 이득이 높아야 하며 FoV(Field of View)를 확보하기 위한 Angle Width를 가져야 한다. 제안된 안테나는 76~81GHz에서 동작하며 Angle width $60^{\circ}$, 안테나이득 15dB 이상을 만족하고 동작주파수내에서 입력반사계수 -10dB 이하의 성능을 갖는다. 안테나의 측정을 위하여 Wave guide WR-10을 사용하였고 측정결과 시뮬레이션과 유사한 결과를 얻었다.

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.79-84
• /
• 2003

A light guide panel is an element of the LCD backlight module that is often used for the display of compact electronic devices. In this study, a laser marking system is proposed to fabricate light guide panel, which can replace other manufacturing methods such as silk printing, stamping, or v-cutting methods. The objective of this research is to evaluate the process parameters of the laser marking system. Light guide patterns were marked with a 50W $CO_2$ laser (CW) to understand the effects of average power and scanning speed on the geometry and quality of groove pattern. The width of the fabricated grooves increases with increasing laser power and decreasing scan speed. In order to analyze surface characteristics and optical properties (luminance, uniformity), SEM photography and BM7 (luminance measuring system) were used. As a result, the optimal conditions of the process parameters were determined.

• 한국인터넷방송통신학회논문지
• /
• 제17권4호
• /
• pp.77-82
• /
• 2017

밀리미터파 대역으로 주파수가 높아짐에 따라 도파관의 단면이 수 밀리미터 이내로서 작아져서 공간결합 전력증폭기를 구현하기에 공간적으로 어려움을 겪게 된다. 본 논문에서는 혼 안테나 원리로 도파관의 폭을 확장하여 이 문제를 극복하고자하였다. 60GHz ISM 대역(57-64GHz)의 공간결합 전력 증폭기에 활용하기 위한 확장된 구형 도파관을 설계하고 확장된 도파관 내에 공간결합을 위한 안티포달 변환기를 설치하여 공간결합 전력 증폭기로서의 특성을 분석하였다. WR15 표준 구형 도파관과의 호환을 위해 WR15 도파관에서 H면 부채꼴 혼 안테나 원리를 이용하여 도파관 폭(a)을 7mm로 확장하여 3개의 백투백 구조의 안티포달 변환기 슬롯을 설치하였다. 설계한 공간결합 전력 증폭기는 사용하고자 하는 대역(57-64GHz)에서 반사손실은 -22.4dB이하이고 삽입손실은 0.53dB 이하로서 매우 양호한 특성을 나타냈다. 한편, 도파관의 폭을 확장함에 따라 WR15 대역폭 내에 $TE_{10}$ 모드 외에도 $TE_{20}$, $TE_{30}$ 모드 등 추가적인 모드들이 발생하게 되었고 이로 인해 대역폭을 제한하여 도파관의 폭 확장을 제한하였다.

• Journal of the Optical Society of Korea
• /
• 제11권3호
• /
• pp.113-117
• /
• 2007

A LED light coupler is proposed for coupling light from a mini side LED of 0.4 mm height to a very thin (${\sim}0.3 mm$) light guide. Due to the ultra thinness of the light guide, conventional light couplings between LEDs and light guides do not provide adequate coupling efficiency. The designed LED coupler is a compound lens of 3.5 mm length, 1.2 mm height, and 3.3 mm width. The courier first collimates the light from the LED and then concentrates the light in a manner similar to a compound parabolic concentrate, (CPC) into the light guide. The exit surface of the coupler is additionally textured to have micro patterns in order to control the radiance profile.