• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.176-183
• /
• 2008

This paper highlights the importance of carrying out global slope stability analysis as part of design calculations for geosynethetic walls in tiered configuration. Four design case histories were selected to examine the appropriateness of their design by performing additional slope stability analyses using the shear strength reduction method with in the frame work of finite element analysis. The results indicated that all of the walls examined, which were designed to meet the current design guide lines, did not satisfy the global slope stability requirement, and that longer reinforcements are required in the upper tiers to achieve the minimum factor of safety. Practical implications of the findings are discussed.

• Research in Mathematical Education
• /
• v.24 no.3
• /
• pp.201-228
• /
• 2021

Teacher noticing has been termed consequential to teaching because what you see and do not see impacts decisions made within the classroom. Further, how a teacher responds to student thinking depends on what a teacher sees in student thinking. Within this study we sought to understand what teachers noticed within an engineering lesson and the decisions made as a result of that noticing. Findings indicate that student teachers and cooperating teachers drew on their pedagogical knowledge for decisions, rather than taking up the integrated content of student thinking and understanding. These findings serve as a guide for the experiences needed to engage in the complex work of teaching or, more specifically, implementing engineering into instruction through a responsive teaching frame.

• SUVANNABHUMI
• /
• v.7 no.2
• /
• pp.57-78
• /
• 2015

Southeast Asia has been a showcase for democratic transitions in the past 30 years. This paper proposes a conceptual lens for studying political shifts in the Southeast Asian region. The argumentative storyline follows two fundamental propositions about democratic transitions. My first proposition is that during democratic transitions, human phenomena arise on nested analytical layers namely the global arena, the state, prodemocracy movements, and individuals. Each layer is conventionally studied by international relations, political science, sociology, and psychology respectively. I propose a multidisciplinary lens that transverses all these analytical layers. A second proposition is that during political shifts, social conditions are historically-situated. Historicity is anchored on stages of democratization, namely the authoritarian regime, toppling the regime, power shift, state building, and nation building. This paper describes a 4 × 5 matrix (analytical layer × historical stage) that may guide a regional agenda on the empirical study of democratic transitions in the Southeast Asian region. It likewise gives examples of research findings in Philippine-based studies that have already begun to provide empirical data about segments of this research matrix.

• Korean Association of Arts Management
• /
• no.57
• /
• pp.5-32
• /
• 2021

The purpose of this study is to find out what kind of experience docent programs provide to visitors in museums by means of Giorgi's phenomenological method. In-depth interview was conducted with 6 visitors who had experienced firsthand. As a result of the coding based upon Giorgi's method, it was divided into 6 categories and 21 subcategories, and the following results were obtained. First, the reason that the subjects of the study participated in the docent program was due to factors such as information, coincidence, induction of companions, and habits. Second, from participating in the docent guide, they felt that the docent led them to actively visit the exhibition, get the educational effect, and generate interest and curiosity. Third, looking at the reaction after participating in the docent guide, in addition to the positive influence, the docent's reading-like explanation and the problem of the microphone facility were negative experiences. Through this study, it was confirmed that there were many visitors who recognized that the docent guide was helpful in viewing the exhibition and experienced positive reactions. In addition, in the evaluation of the commentary of docent, there was a difference of views between art-related majors and non-majors. In addition, as a result of analyzing the participants' experiences according to Holt's frame of experiential consumption, it was found that the docent experience was a comprehensive consumption behavior appearing in all four fields.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.75-76
• /
• 2006

LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of kernel parts of LCD unit and it consists of several optical sheets(such as prism, diffuser and protector sheets), LCP (Light Guide Plate), light source (CCFL or LED) and mold frame. The LGP of LCD-BLU is usually manufactured by forming numerous dots with $50{\sim}200{\mu}m$ in diameter on it by erosion method. But the surface of the erosion dots of LGP is very rough due to the characteristics of the erosion process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current dot patterned LGP, optical pattern design with $50{\mu}m$ micro-lens was applied in the present study. Especially, the negative and positive micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The attention was paid to the effects of different pattern conditions to the brightness distribution of BLU with micro-lens patterned LGP. Finally, negative micro-lens patterned LGP showed superior results to the one made by positive in average luminance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.1
• /
• pp.13-25
• /
• 1997

전 세계의 대형 저속 디젤 엔진을 설계.제작하는 회사는 1980년대에 들어오면서 MAN - B&W, SULZER, MITSUBISHI의 3파전 양상을 띠고 있으며, 세계 시장점유율에서는 MAN - B&W가 50%이상을 차지하고 있다. 한국은 현재 한국중공업, 현대중공업, 쌍용중공업 및 삼성중공업에서 대형 저속 디젤 엔진을 생산하고 있다. 국내에서 생산되고 있는 대형 저속 디젤 엔진은 대부분이 MAN - B&W형이고 SULZER형이 약 20%를 차지하고 있다. 기술력은 위의 3사에 거의 의존하고 있으며, 설계보다는 생산에 치중하고 있는 실정이다. 선박용 엔진 구조물은 베드 플레이드(bed plate), 실린더 프레임(cylinder frame), 프레임 박스(frame box)등이 주 스테이 볼트(long stay bolt)에 의하여 체결되어 한 개의 대형 수직 구조물을 이루고 있으며, 프레임 박스의 안내면(guide plate)과 베드 플레이트의 베어링 지지부(bearing support)등은 엔진의 폭발력과 선박의 추진력을 직접적으로 받으므로 구조적 결함과 하자 보수의 문제들이 발생하고 있다. 이와 같은 사용상 및 제작상의 제문제를 해결하기 위해서는 유한요소 구조 해석 능력을 자체 보유하여 구조 설계상의 문제점을 분석하고 엔진 구조물의 취약 부위를 집중 검토하여야하며, 이를 통해 선박의 운항 중에 일어날 수 있는 사고를 미연에 방지할 수 있다. 그러나 국내에서는 이러한 대형 엔진 구조물의 설계/해석 기술이 거의 없고 구조적 문제점이 발생할 경우에는 모든 사항을 설계사(licensor)에 전적으로 의존하고 있는 실정이다. 한편, 설계 기술을 보유하고 있는 MAN - B&W, NEW SULZER DIESEL사 등은 정밀 구조 해석을 통하여 기존 엔진 구조물에 대한 안전성 및 신뢰성을 높임과 동시에 신 모델 개발에 박차를 가하고 있으나, 기술 이전은 회피하고 있어 대형 엔진 구조물에 대한 구조 해석 기술의 개발이 시급하다고 할 수 있다. 본 해설에서는 CAD/CAE(Computer Aided Design/Computer Aided Engineering)를 이용하여 위에서 제시된 대형 엔진 구조물의 구조해석 절차와 방법에 대해 간략히 설명하고자 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.114-119
• /
• 2009

The authors have investigated the NVH problems of drive system in full vehicle test. However it is difficult to define the NVH problems of driveline system. Since it is hard to measure the rotating part and it is vague that only the drive system induces the NVH problem. Vibration in a driveline is presented in this paper. In the experiment, the rear sub-frame and propeller shafts and axle were composed and mounted with rubber each other. For applying the vibration input instead of the torsional vibration effect of an engine, the shaker was taken. In particular, torsional vibration due to fluctuating forced vibration excitation across the joint between driveline and rear sub-frame was carefully examined. Accordingly, the joint response was checked from experiments and the FE-simulation using FRF (frequency response function) analysis was performed. All test results were signal processed and validated against numerical simulations. In present study, the new test bench for measuring the vibration signal and simulating the vehicle chassis system was proposed. The modal value and the mode shape of components were analyzed using the CAE model to identify the important components affecting driveline noise and vibration. It could be reached that the simplified test bench could be well established and be used for design guide and development of the vehicle chassis components.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3619-3626
• /
• 2015

The coal shed at thermal power plant(T.P.P) is the biggest building on size among nuclear, coal and other power plant industry buildings. This the coal shed of indoor type is mass volume, the size of 6 soccer fields and 73 meter in height. Structural and functional elements take priority over aesthetic factors. The shed is built to make mighty space for structural safety and functional store by using the concrete, $75,000m^3$ on the total of central retaining wall and sub buttress, and the steel frame used by 11,744-ton P.E.B. system. The design requirement on its wall and frame, P.E.B. system's feature, and specific data of main process followed by construction are inquired. The aim of this study is to suggest the design requirement and guide for the indoor type of the coal shed.

• Journal of Korean Elementary Science Education
• /
• v.25 no.2
• /
• pp.126-140
• /
• 2006

The purpose of this study was to design a 'Form of Abduction' which is the 'guide form used in generating hypothesis through abduction', and to analyze the features of the hypotheses generated with the 'Form of Abduction' compared with those generated without any special guide form. Through a review of Peirce's literature regarding the meaning and frame of abduction, a 'Form of Abduction' was designed as a three step format as follows: (i) writing down what is doubted, (ii) wiling tentative explanations which replace what is doubted with what is believed, (iii) writing the tentative explanations as hypotheses. The thirty four pre-service elementary teachers were asked to generate hypotheses without a 'Form of Abduction' at first, and then were asked to do so again using the form. The results of analysing the features of the hypotheses were as follows: in the case of using a 'Form of Abduction', firstly, the types of misunderstanding or mis-adapting the meaning of hypothesis were found to be rare, and secondly, the types of 'giving explanation about the cause of problematic situations through analogical inferencing from the existing knowledge' were found to be double the rate of when no special guide form was used. In conclusion, the hypotheses generated with the 'Form of Abduction' had the features of satisfying the original meaning of hypothesis, i.e. 'explaining the cause of phenomenon and leading to knowledge expansion'. These results also showed that using a 'Form of Abduction', although its form was simple, could be a way of helping students generate hypothesis properly in science classes.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1067-1073
• /
• 2023

Breast cancer is one of the top three most common cancers in modern women, and the incidence rate is increasing rapidly. Breast cancer has a high family history and a mortality rate of about 15%, making it a high-risk group. Therefore, breast cancer needs constant management after an early examination. Among the various equipment that can diagnose cancer, ultrasound has the advantage of low risk and being able to diagnose in real time. In addition, breast ultrasound will be more useful because Asian women's breasts are denser and less sensitive. However, the results of ultrasound examinations vary greatly depending on the technology of the examiner. To compensate for this, we intend to incorporate motion tracking technology. Motion tracking is a technology that specifies and analyzes a location according to the movement of an object in a three-dimensional space. Therefore, real-time control is possible, and complex and fast movements can be recorded in real time. We would like to present the production of an ultrasound examination guide using these advantages.