• The Korean Society of Law and Medicine
• /
• v.9 no.2
• /
• pp.209-229
• /
• 2008

When we are totalizing the lawsrelated to the medical, as the Laboratory medical testing is a kind of the medical act, it is the regulation that the medical technologist can analyze the specimen using in vitro diagnostic devices and diagnosticdrugs under the guidance of doctor or dentist from a corresponding medical institution and can report through verification and interpretation. However, in real medical fields, 'the guidance of doctor' is seriously in-sufficient or even the person who is not the medical technologist is executing. Furthermore the cases that produce inspection results with devices or reagents which are not validated nor approved have been frequently occurred. The result of Laboratory medical testing derived from this procedure can become the important information for the disease control of a country, and also can be decisive to the definite diagnosis and the prognostic monitoring about the patient disease. In spite of its significant medical act to be applicable to an unique proof with the related expert appraisal result in the medical mal-practice lawsuit, our reality in which the quality control is not properly working due by the costs and the labor shortage related to the Laboratory medical testing is quietly in bad condition. Even from now, the government should recognize the significance of the Laboratory medical testing and must achieve more strict administrative management as well as the law maintenance.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.480-485
• /
• 2002

The purpose of this paper is the development of guidance algorithm for a mobile robot which is used to acquire the position and state information of the pipe defects such as crack, damage and through hole. The data used for the algorithm is the range data obtained by the range sensor which is based on an optical triangulation method. The sensor, which consists of a laser slit beam and a CCD camera, measures the 3D profile of the pipe's inner surface. After setting the range sensor on the robot, the robot is put into a pipe. While the camera and the LSB sensor part is rotated about the robot axis, a laser slit beam (LSB) is projected onto the inner surface of the pipe and a CCD camera captures the image. From the images the range data is obtained with respect to the sensor coordinate through a series of image processing and applying the sensor matrix. After the data is transformed into the robot coordinate, the position and orientation of the robot should be obtained in order to guide the robot. In addition, analyzing the data, 3D shape of the pipe is constructed and the numerical data for the defects of the pipe can be found. These data will be used for pipe maintenance and service.

• Journal of The Korean Association For Science Education
• /
• v.26 no.1
• /
• pp.40-48
• /
• 2006

The purpose of this study was to investigate 6th grade pupil's thoughts during classification activities. Two suitable tools in classification activity achievement were developed to achieve this purpose. The first was an artificial stimulus card in which the attribute was prominent; and the other a natural stimulus card in which the attribute was less prominent. Participants of the study were 8 6th grade pupils from D elementary school in Yeongdeungpo-gu, Seoul. Data were collected from interviews with the pupils, the pupil's recordings of classification, the investigator's observation of pupil's actions, and video recordings of the pupil's subject classification process. Results found in this study were as following. First, when doing classification 6th grade pupils considered attribute observation, attribute estimation, preliminary inspection, criteria selection, and sample identification. Second, 6th grade pupil classification thought process was found to be repetitive, passing through the steps of attribute observation, attribute estimation, preliminary inspection, criteria selection, and lastly, sample identification. Third, 6th grade pupils took advantage of cognitive economic efficiency. Study findings also revealed guidance for the teaching and learning of scientific classification. First, once teachers understand the classification thought process of students, more effective classification guidance will be possible. Second, it is necessary that guidance fit each step of the classification thought process.

• Journal of Fashion Business
• /
• v.2 no.2
• /
• pp.77-84
• /
• 1998

As a result of surveying the process for sewing, the problems involving the outlook of sewn apparels were error off the standard dimensions and uneven sizes, which verifies the need for urgent technological guidance and development. On the other hand, the majority of the businesses were operating their sewing machines at the speed of 2,000 rpm or higher. Such a conventional working method may not well reflect the properties of the stretch fabrics, causing poorer quality products. Moreover, most of the businesses were using the ball-point needles which should be replaced with appropriate ones for stretch fabric. The types of feed dog which were used most were Drop feed, Union feed, Confound feed, Differential feed in their oder. Anyway, the automatized dog should urgently replace these inefficient ones for stretch fabric. Meanwhile, the types of presser foot which were used most were Plain foot, Teflon foot, Roller foot, Ring foot in their order, which also necessitates their replacement which Teflon foot. 2. As a result of surveying the process for finishing and inspection, while the causes scores less than 3 points, those due to pressers scored more than 3 points. This results suggests that a technological guidance is needed for the pressing work. Lastly, the causes of defect due to poor outlook attributable to such notions as button or zipper and those due to the uneven sizes scored more than 3 points, which suggests that the entire of needle works should be reformed through scientific research and technological guidance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6466-6474
• /
• 2015

The purpose of this study is to indicate the problem and its improvement plan derived from pollution discharge industries inspection, implementation process on overall instruction including record management, and utilization of information about emission. This focuses on analyzing the inspection system of pollution discharge industries and the actual condition of management system with survey and interview from the managers. As a result of examining the administration information system from each of structural and practical perspectives, the users were not able to receive support for inspection through the system because it was designed based on licensing. Also according to results of survey and interview, it was difficult to input checkup data and to maintain the information of emission in a sustainable manner. This problem occurs since the current system is not utilized properly. Thus, this study examines similar systems operated in Korea and suggests measure to make improvements. The measures are considered as constructing simple user interface for systematizing of administrative works, simplifying the input matters, linking systems of inspection and emission information, establishing statistical function of emission information, and managing inspection functions through the mobile system.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.180-184
• /
• 2008

Fire prevention strategies should be aimed at the prevention of structured fire since average annual rates of structured fire have been increased due to economic growth resulted in increasing high rise buildings and multipurpose occupancies over the past ten years. Hence, this study mainly focused on the improve method and problems in the field test of fire detector in compliances with experimental consideration. And it leads us to the flowing conclusions : Firstly, it is necessary to formulate a safety standards on field test. Nowadays, the test enforced in many ways without formulated standard. Therefore it is necessary to be complete the arrangements standardized and how to do the test with formulated safety standards. Second, it is necessary to establish the regal guidance with regard to inspection equipment, ie density, component and temperature of test equipment should be considered. Also the equipment is need to be standardized and improved. Third, fire inspector's competency in their practice should be enhanced. The problems arising from the lack of knowledge and competence regarding inspection could be settled by providing professional education to ensure proficiency in their practice. Specialized training, as has been noted, should be offered in accordance with occupancy type, scale and fire protection system in the fire facilities.

• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.219-224
• /
• 2011

To improve medical service and customers' satisfaction by reducing actual waiting time for medical inspection by personalized examination guidance contents (PEGC) linked with medical information system (MIS). The suggested PEGC was completed with preparing transmission for data and PEGC by using transmission control protocol internet protocol (TCP/IP) which can be built up creditable data transmission service. When patient signal event appeared in MIS while the communication was in standby, the ID and data of the customer were shown as text and image on monitors in waiting room. Guiding inspections, steps of examination, and undressing information extracted from the PEGC was also shown to the appropriate patient. After installation of the suggested PEGC, we rechecked satisfaction rates of 60 customers who visited the hospital with a same method as initial survey. The results of this study suggest that 3.6 point of waiting time satisfaction index were improved, after installation of the suggested PEGC, as 4.6 point.

• Journal of the Korean Dietetic Association
• /
• v.22 no.4
• /
• pp.320-339
• /
• 2016

This study was conducted to identify risk factors to ensure food safety by evaluating cook supervisors' perceived performance of vegetable safety management at Korean food restaurants in Daegu. Recognition of the potential foodborne illness caused by vegetables was 2.60/5 on average. Inspection items with low scores by respondents during food safety inspection by government agencies were "Wash and sanitize vegetables" and "Keep washed and cut vegetables in the refrigerator". As for storage, perceived performance of "Store vegetable in the refrigerator less than 70% of the refrigerator capacity" scored less than 4 out of 5. About 86% of respondents answered "Water-only washing" for vegetable washing. For perceived performance of vegetable cooking, service, and leftover handling, 11 and three items out of 13 were significantly different depending on the size of restaurants and possession of culinary arts certificates, respectively. Based on results, it is necessary to provide food safety training programs for handling vegetables in order to increase knowledge of cook supervisors. In addition, intensive on-site guidance for safety management of vegetables is needed.

• Journal of Korean Public Health Nursing
• /
• v.12 no.2
• /
• pp.12-26
• /
• 1998

The occupational health problems are the major issue in the modern industrial society. Especially the small scale industries have many hazardous factors and not any occupational health programs in itself. Fortunately. the government-funded subsidiary program was developed and carried out in the past six years in our country. The purposes of this study were to find out the actual condition of the occupational health personnel's accomplishments for the government-funded subsidiary program for small scale industries and to provide basic data for setting up more developed subsidiary occupational health program. Data were collected through 6 kinds of service records review. These service records were written by 3 occupational health personnels were attached to the one subject center of KIHA. were undertaken during March to December, 1997. at 95 small scale industries which were applied the government-funded subsidiary occupational health program. Results were as follows 1. Concerning 95 small scale industries showed characteristics of a typical small scale industry. 2. A doctor visited in industries total 190 times per year, average 19 industries per month, twice per year and industry. A hygienist visited in industries total 378 times per year, average 38 industries per month, four times per year and industry. A nurse visited in industries total 477 times per year. average 47 industries per month, 5 times per year and industry. 3. 3 occupational health personnels accomplished total 3,869 items. A doctor accomplished total 539 items per year, each time 3 items In an industry. A hygienist accomplished total 1.581 items per year, each time 4 items in an industry. A nurse accomplished total 1.749 items per year, each time 4 items in an industry. 4. The major contents of doctor's accomplishment were 'health consultation for suspicious worker with general & occupational disease', 'a check of the workplace & special health education', 'guidance of special medical examination in the second half of year', etc. The major contents of hygienist's accomplishment were 'pretest & guidance of planning for evaluation of working environment'. 'evaluation for ventilating facilities & suporting self inspection', 'guidance of MSDS recording & chemicals management', etc. The major contents of nurse's accamplishment were 'health counseling of general & special medical examination results'. 'health education of preventing occupational disease & health disorder'. 'guidance of subsidiary program planning', 'selecting & guidance of health monitor', etc. It was concluded that the occupaional health personnels implemented the subsidiary program according to the order of health management guide. The current health management guide of subsidiary occupational health program in which the fixed contents, visiting number & periods is not desirable. That guide is left the characteristics of small scale industries out of consideration. It is suggested that occupational health management guide should be developed according to the general & environmental characteristics of each small scale industry, and on the other hand, the more specific guide for each occupational health personnel should be developed.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.127-132
• /
• 2002

Recent deepwater offshore structures in Gulf of Mexico utilize butt welded tubular joints. Application of welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical because the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimating the fatigue behavior of these tubular members in the design stage is generally conducted by using S-N curves specified in the codes and standards. Applying the stress concentration factor of the welded structure to S-N approach often results in very conservative assessment because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fracture mechanics and fitness for service (FFS) technology have been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves to be used and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. An attempt was made to develop set of S-N curves based on fracture mechanics approach by considering non-uniform stress distribution and a threshold stress intensity factor. Series of S-N curves generated from this approach were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02"). Similar comparison with API X′ was made for tubular joint.. These initial crack depths are larger than the limits of inspection by current Non-destructive examination (NDE) means, such as Automatic Ultrasonic Inspection (AUT). Thus a safe approach can be taken by specifying acceptance criteria that are close to limits of sizing capability of the selected NDE method. The comparison illustrates conservatism built into the S-N design curve.