• Proceedings of the KWS Conference
• /
• 1999.05a
• /
• pp.237-240
• /
• 1999

In this study, residual stresses of the weldment were calculated by finite element analysis(FEA) and experiment. And, the crack closure behaviour and fatigue crack growth characteristics in field of residual stress of A106 Gr B steel pipe weldment were investigated under various stress ratio. Obtained results are as follows. I) $K_{op}$ was independent of $K_{max}$, and load ratio in fatigue crack growth. 2) In variation of load ratio, the scatter band of crack growth curve was reduced by half considering crack closure. and 3) Neglecting crack closure behaviour, actual fatigue crack growth rate can be underestimated' and Actual fatigue crack growth rate can be overestimated by $K_{res}$, in tensile residual stress field.

• Macromolecular Research
• /
• v.9 no.6
• /
• pp.319-326
• /
• 2001

Fatigue crack growth (FCG) behavior of natural rubber/ethylene-propylene-diene rubber (NR/EPDM) blend vulcanizates under dynamic tearing condition was investigated by using a fracture mechanics approach. It appeared that variation of crack growth rate with blend compositions was dependent on the level of imposed tearing energy G. At low tearing energy region, the FCG rates of the blend were lower as the EPDM content was increased, while at high tearing energy region, the trend was reversed. Over the measured range of tearing energy G, all blend compositions showed the lower crack growth rates compared to the average of properties of component elastomers. When the blends were thermally aged, the fatigue resistance of the blends was deteriorated in proportion to the concentration of EPDM phase. Fatigue crack growth behavior of the blends was supposed to be associated with the inhomogeneities of the crosslink structure of the blends arising from cure incompatibility of the EPDM and NR when they are sulphur cured.

• Plant Disease and Agriculture
• /
• v.1 no.2
• /
• pp.18-21
• /
• 1995

Mycosphaerella nawae, the causal organism, of spotted leaf casing disease of persimmon, was isolated from infected leaves showing typical symptom. The cultural characteristics of the fungus were compared on artificial media. Among 24 different combinations of culture media and supplements, oatmeal agar+persimmon leaf extract (PLE) and PAD+ PLE+streptomycin showed the highest rate of isolating as 57.1%. The best medium for mycelial growth of the fungus was PDA+persimmon leaf powder (PLP). The colony diameter was reached 47mm for 30 days at 2$0^{\circ}C$. PDA+PLE also supported good mcyelial growth showing 46mm of diameter in same condition. The optimum growth temperature of this fungus in PDA was recognized fairly low. The mycelial growth was higher at 2$0^{\circ}C$ than 15$^{\circ}C$. The variation of pH between pH 4 to pH 8 did not affect to the mycelial growth of the pathogen.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.8
• /
• pp.1178-1181
• /
• 2002

Records from a total of 202 crossbred pigs were classified by their ear type and coat color to examine the presence of interrelationships with growth performances. Crossbred pigs were F2 generations of full sib family out of ten Landrace sows bred by 5 Korean domestic boars. Heavily drooped ear type was predominant, 195 out of 202 pigs over the other two types (1 straight and 6 slightly drooped). Coat colors were classified as four categories, all white, all black, dominant white or dominant black. Ratio among coat color categories did not fall within Mendelian principle of independence regarding two loci involved. There was dependency between ear type and coat color. However, due to rarity of ear types other than heavy drooped, dependency comes from distribution of those rare ear types. Three least squares models to test the effect of ear type and coat colors on growth performances were analyzed. First model analyzed effects on birth weight, body weight at 3 and 6 weeks and ADG' before weaning and between 3 and 5 weeks of age. This model included sex in addition to ear type and coat color. Second model analyzed postweaning growth traits (initial weight, final weight and ADG between these periods) upon initiation of performance testing. This model included effects of sex, test group and start age (as a covariate) in addition. Third model was fit for fasted weight before slaughter and included the effects of sex, test group and age at slaughter (as a covariate). The effects of sex and ear type were not significant source of variation for all traits. Test group was a significant source of variation for all the postweaning traits. Effect of coat color was not significant until the initiation of performance testing and became significant then after. Least squares means of dominantly black pigs were significantly lower than the other three coat colored pigs in final weight around 195 days of age and in ADG from the start of performance test and final weight measure.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.1
• /
• pp.61-69
• /
• 2004

A long-term growth simulation was performed at 99 land units in Yeoncheon county to test the potential adaptability of each land unit for growing soybean cultivars. The land units for soybean cultivation(CZU), each represented by a geographically referenced land patch, were selected based on land use, soil characteristics, and minimum arable land area. Monthly climatic normals for daily maximum and minimum temperature, precipitation, number of rain days and solar radiation were extracted for each CZU from digital climate models(DCM). The DCM grid cells falling within a same CZU were aggregated to make spatially explicit climatic normals relevant to the CZU. A daily weather dataset for 30 years was randomly generated from the monthly climatic normals of each CZU. Growth and development parameters of CROPGRO-soybean model suitable for 2 domestic soybean cultivars were derived from long-term field observations. Three foreign cultivars with well established parameters were also added to this study, representing maturity groups 3, 4, and 5. Each treatment was simulated with the randomly generated 30 years' daily weather data(from planting to physiological maturity) for 99 land units in Yeoncheon to simulate the growth and yield responses to the inter-annual climate variation. The same model was run with input data from the Crop Experiment Station in Suwon to obtain a 30 year normal performance of each cultivar, which was used as a "reference" for evaluation. Results were analyzed with respect to spatial and temporal variation in yield and maturity, and used to evaluate the suitability of each land unit for growing a specific cultivar. A computer program(MAPSOY) was written to help utilize the results in a decision-making procedure for agrotechnology transfer. transfer.

• Korean Journal of Materials Research
• /
• v.1 no.1
• /
• pp.37-45
• /
• 1991

In order to control the microstructures, the sintering behavior and abnormal grain growth with Ba/Ti ratio variation of $BaTiO_3$were investigated. The $BaTiO_3$powders used in this study were prepared by conventional calcination of $BaCO_3$ and $TiO_2$. The onset temperatures of the sintering were lowered and the densification was enhanced with increasing amounts of $TiO_2$ excess. These results are because of decrease of calcined particle sizes. A eutectic melt above temperature of $1320^{\circ}C$ did not assist the densification. Grain growth was strongly inhibited with increasing amounts of $TiO_2$ excess. The inhibition of grain growth caused abnormal grain growth due to inhomogeneous distribution of Ti-rich second phase.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.526-526
• /
• 1996

The single crystal of LiTaO3 is well known eletro-optic material as well as the piezoelectric one applied to SAW filter. LiTaO3 has large electro-optic effects, so applied to optical switch, acosto-optic deflector, and optical memory device using photorefractive effects. The crystal growth of SAW-grade LiTaO3 has been studied many aspects, but there is no detail research about optic-grade crystal growth. The conditions of optic-grade LiTaO3 single crystal are as below. The optical transmittance must be over 75%, and axial and radial concentratiom uniformity below 1%. The variation of Curie temperature depending on Li/Ta ratio must be also below 2$^{\circ}C$ and no internal no internal cracks and defects. Because of the limitation of crystal quality, the growing of optic-grade LiTaO3 single crystal is very difficult compared with the growing of SAW-grade. In this research, upper conditions of optic-grade single crystal was investigated after growing of 1 inch diameter and 1.5 inch length LiTaO3 single crystal having no internal cracks and defects using Czochralski method. Curie temperature was determined with DSC and measuring capacitance and lattice parameter was calculated about the grown crystal and ceramic powder samples of various Li/Ta ratio. The result of Tc variation was below 1.2$^{\circ}C$ all over the grown crystal, so it is confirmed that LiTaO3 was grown under congruent melting composition having optical homogeniety. Also, the optical transmittance was about 78%, which was sufficient for optical device.

• Journal of Aquaculture
• /
• v.10 no.2
• /
• pp.219-225
• /
• 1997

The growth and size variation of rotifer (Brachionus plicatils) were examined at the various water temepratures ranging form 18 to $36^{\circ}C$, and under continuous light condition. Either Chlorella ellipsoidea or $\omega$-yeast were fed to rotifer as a food organism. Compared to large-type rotifer fed of $\omega$-yeast, those fed on C. ellipsoildea generally showed higher growth at 7th after starting culture under the water temperaure of less than $30^{\circ}C$. Above such temperature, the large-type rotifer fed on $\omega$-yeast showed higher growth rather than those fed on C. ellipsoidea and the maximum cell number reached 1,420 ind./m$\ell$ at $36^{\circ}C$, whereas when the small-type rotifer was fed on $\omega$-teast, its maximum cell number was to be 1,669 ind./m$\ell$at $34^{\circ}C$. The striking decrease in size was found in large-type rotifer which was to be $112.1\mu m$m(initial : 202.0${\mu}{\textrm}{m}$) when they were fed on C. ellipsoidea at $34^{\circ}C$ for 5 days after starting culture. A great increase in size from the initial of 157.0 to $201.3\mu m$mwas show in small-type rotifer fed on $\omega$-yeast at $20^{\circ}C$,for 5 days. The present results demonstrated that size variation of rotifer could be controlled by changing culture temperature.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.104-109
• /
• 2002

In this paper, a statistical analysis of fatigue crack growth behavior under constant amplitude loads has been carried out. Fatigue crack growth tests were conducted on sixteen pre-cracked compact tension (CT) specimens of the pressure vessel (SPV50) steel in controlled identical load and environmental conditions. The assessment of the statistical distribution of fatigue crack growth experimental data obtained from SPV50 steel was studied and also the correlation of the parameter C and m in the Paris-Erdogan law was discussed. The probability distribution function of fatigue crack growth life seems to follow the 3-parameter Weibull. The fatigue crack growth rate seems to follow the 3-parameter Weibull and the log-normal distribution. The coefficient of variation (COV) of fatigue crack growth life was observed to decrease as the crack grows. A strong negative linear correlation exists between the coefficient C and the exponent m in Paris model. Fatigue crack growth rate data shows a normal distribution for both m and logC.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.923-929
• /
• 2003

In this paper, an analysis of fatigue crack growth behavior from a statistical point of view has been carried out. Fatigue crack growth tests were conducted on sixteen pre-cracked compact tension (CT) specimens of the pressure vessel (SPV50) steel in controlled identical load and environmental conditions. The assessment of the statistical distribution of fatigue crack growth experimental data obtained from SPV50 steel was studied and also the correlation of the parameter C and m in the Paris-Erdogan law was discussed. The probability distribution function of fatigue crack growth life seems to follow the 3-parameter Weibull. The fatigue crack growth rate seems to follow the 3-parameter Weibull and the log-normal distribution. The coefficient of variation (COV) of fatigue crack growth life was observed to decrease as the crack grows. Fatigue crack growth rate data shows a normal distribution for both m and logC. A strong negative linear correlation exists between the coefficient C and the exponent m.