• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.2
• /
• pp.254-260
• /
• 2012

This study was conduced to ferment high quality wine by using Omija fruit. Dry Omija farmed and dried in the Moonkyung area was used in this study. The Omija was soaked in 10~40 folds of distilled water to extract water-soluble components and the fluid was filtered after soaking for 6 hours at $50^{\circ}C$. Strains of alcoholic yeast were isolated respectively from spoiled Omija extract. Isolated alcoholic yeasts, OM-1 and OM-2, showed a round to ellipsoidal shape and formed white or milky white colonies on a solid YM medium. Two yeasts produced 10.33~11.23% alcohol from Omija extract adjusted to $10^{\circ}Brix$ with sugar. Their abilities to ferment alcohol were higher than those of other yeast strains belonging to Saccharomyces cerevisiae such as KCTC 7296 (standard strain of Korean Biological Resources Center), Makgeolli yeast, or beer yeast. The isolates OM-1 and OM-2 showed similar abilities in alcohol fermentation. However, the wine fermented by OM-2 got a better sensory score especially with color. Growth of OM-2 was significantly accelerated by addition of a 0.1% urea and 0.02% mineral mixture. A vitamin mixture was effective for the growth only when urea was added as well.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.6
• /
• pp.295-302
• /
• 2017

In this study, the effect of pre-curing process on the enhancement of mechanical properties of IGCC-slag-based-geopolymer was studied. Pre-curing is a process in which the green geopolymer is left at room temperature for a certain period of time prior to the high-temperature curing, and it is known as increasing the strength of a specimen. Therefore, in this experiment, the compressive strength of the geopolymers was measured according to various pre-curing conditions, and microstructure and crystal phase changes were observed by SEM and XRD, respectively. The W/S ratio was determined to be 0.26, which can offer the maximum geopolymer strength with easy molding ability, and the concentration of the alkali solution was 15 M. Pre-curing was performed at room temperature for 0 to 27 days. Compressive strength of the geopolymer made with pre-curing process increased by 36~87 % compared with the specimens made with no pre-curing process. Those improved compressive strength for the pre-cured geopolymer was confirmed owing to promotion effect of pre-curing process on generation of C-S-H gel and zeolite phases, which were analyzed using by XRD and SEM measurement.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.166-176
• /
• 1994

Ni base superalloys are composed of solid sohltion hardening elements(Co, Cr. Mo. W and so on) and $\gamma '$ precipitation hardening elements(A1, Ti, Nb, Ta and so on). To Improve the mechanical properties and oxidation resistanre of superalloys, rare earth elements(%r, Hf, Y and so on) are added to the inner substrate, or are used as coating materials. Their pffects on the growth rate and adhes~on of oxide are changed according to the kinds of oxides such as $AI_2O_3$ and $Cr_2O_3$. The effect of yttrium on the oxidation rate, grain size of oxide, internal structure, and crack resistance was investigated for two kinds of Ni-base superalloys. One in AF'115 superalloy containing Hf and the other is MA6000 superalloy containing $Y_2O_3$. They werr owid~zed at high temperature after yttrium surface modification using ion coater. Yttrium coating on the AF115 and MA6000 superalloys results in a marked change in the growth of the inner oxide. For AF115 superalloy, the degree of gram boundary segregation of $Cr_2O_3$, and prefer en^ tial oxidation of Hf are decreased, and the shape of inner oxidation layer was changed from triangle to plate type. For MA6000 superalloy, $Cr_2O_3$ oxide scale was transformed as outer oxidation layer of CrZOI and inner oxidation layer of $Cr_2O_3$.

• Korean Journal of Plant Resources
• /
• v.12 no.1
• /
• pp.1-9
• /
• 1999

The experiments were carried out to determine the optimum conditions for the induction of hairy roots in ginseng(Panax ginseng C.A. Meyer) by Agrobacterium spp. We were examined the antibiotics resistance of Agrobacterium spp and various ginseng parts, and the media for induction of hairy roots. The optimum concentration of NaOCl for sterilization of ginseng root segments without tissue damage with reduce of contamination was 7% NaOCl for 15-20 min and 9% NaOCl for 5 min, respectively. The more ginseng ages, the more contamination of ginseng root segment by sterilized in 7% NaOCl for 20 min, and especially in ginseng root segments with epidermis in six-year old roots. The growth of Agrobacterium spp were inhibited, but ginseng root segments was death in 30mg/L tetracycline. In 500mg/L cefotaxime or 500mg/L carbenicillin, the growth of Agrobacterium sup were inhibited, and root segments was grown normally. The optimum conditions for induction of hairy roots were using the root segments of three-year old ginseng cultured in 1/2MS medium supplemented with 500mg/L cefotaxime, and inoculation of Agrobacterium to root segments were better co-culture than smear method. After 2 weeks co-culture, the callus induced in cambium of root segments cultured in 1/2MS solid medium with 500mg/L cefotaxime. And then after 2 weeks, ginseng hairy roots were induced in callus of root segments. PCR analysis of rot C gene fragment confirmed that hairy roots were transgenic tissues.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.3
• /
• pp.188-195
• /
• 2014

This study was carried to investigate the effect of illite addition on the growth, bioactive components and volatile compounds of leaf on Saururus chinensis Baill cultivation in greenhouse. Illite addition on Saururus chinensis Baill cultivation resulted no significant effects on the aerial part. However, the root part was highest in 5% illite addition group. Crude oil and ash amount increased as illite additives was increased. Ca of inorganics and free sugars contents were highest in 5% and 20% illite addition, respectively. Hyperoside and isoquercetin of available component on leaf were highest in 5% illite addition group, 4.02mg/g and 4.31mg/g, respectively. The volatile compounds in Saururus chinensis Baill leaf cultured with illite addition amounts were isolated by solid-phase microextraction fiber (polydimethysiloxane $65{\mu}m$) and identifed by gas chromatogtaphy mass spectrometry. As the results, the 22 volatile compounds were identified from in Saururus chinensis Baill leaf and major volatile compounds were the ${\alpha}$-cadinol (18.50%), myristicin (16.46%), methyl-9-methyl-tetradecanoate (10.22%), and ${\gamma}$-muurolene (9.75%). Especially, the content of ${\alpha}$-cadinol was highest in 5% illite addition group and ${\gamma}$-muurolene on overall illite addition group was lower than no addition group.

• Journal of Plant Biotechnology
• /
• v.31 no.3
• /
• pp.219-223
• /
• 2004

Embryogenic calli were induced from petioles of Aralia elata on MS solid medium supplemented with 1.0 mg/L 2,4-D. When embryogenic calli were transferred to MS liquid medium supplemented with 1.0 mg/L 2,4-D, embryogenic cells and embryogenic cell clusters were developed after 2 weeks of culture. Embryogenic cells were filtered through a 250 ${\mu}{\textrm}{m}$ sieve and the passed cells were proliferated and maintained in MS liquid medium supplemented with 1.0 mg/L 2,4-D. Embryogenic cell clusters entrapped on the sieve were transferred to 1/2 MS liquid medium without plant growth regulators, globular-shaped embryos were developed from embryogenic cell clusters after 2 weeks of culture. Numerous early stage somatic embryos could be developed to heart-shaped, torpedo-shaped, cotyledonary embryos and plantlets in 5 L bioreactor. Above results suggest that effective somatic embryo proliferation can be achieved via bioreactor culture systems in Aralia elata.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.225-230
• /
• 1999

Low pressure metal organic chemical vapor deposition (LPMOCVD) of $Li_2O$ solid thin films from Li(DPM) in nitrogen-oxygen or argon-oxygen atmosphere was experimentally investigated by using a small hot wall tubular type reactor. XRD and ESCA analysis revealed that $Li_2CO_3$ film grew in nitrogen-oxygen atmosphere and $Li_2O$ grew in argon-oxygen atmosphere. The grown lithium oxide or carbonate reacted with silicon or silica base materials to produce silicates. The CVD model analysis by means of the well-known micro trench method and Monte Carlo simulation was not fully successful, but a set of data on gas phase reaction rate constant and surface reaction constant was obtained.

• Journal of the Korean Ceramic Society
• /
• v.54 no.2
• /
• pp.150-157
• /
• 2017

Three types of piezoelectric single crystals [PMN-PT (Generation I $[Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3]$), PMN-PZT (Generation II $[Pb(Mg_{1/3}Nb_{2/3})O_3-Pb(Zr,Ti)O_3]$), PMN-PZT-Mn (Generation III)] were grown by the solid-state single crystal growth (SSCG) method, and their dielectric and piezoelectric properties were measured and compared. Compared to (001) PMN-PT and PMN-PZT single crystals, the (001) PMN-PZT-Mn single crystals exhibited a higher transition temperature between the rhombohedral and tetragonal phases ($T_{RT}=144^{\circ}C$), as well as a higher coercive electric field ($E_C=6.3kV/cm$) and internal bias field ($E_I=1.6kV/cm$). The (011) PMN-PZT-Mn single crystals showed the highest coercive electric field ($E_C=7.0kV/cm$), and the highest stability of $E_C$ and $E_I$ during 60 cycles of polarization measurement. These results demonstrate that both Mn doping (for higher electromechanical quality factor ($Q_m$)) and a (011) crystallographic orientation (for higher coercive electric field and stability) are necessary for high power transducer applications of these piezoelectric single crystals. Specifically, the (011) PMN-PZT-Mn single crystal (Gen. III) had the highest potential for application in the fields of SONAR transducers, high intensity focused ultrasound (HIFU), ultrasonic motors, and others.

• Journal of Service Research and Studies
• /
• v.5 no.2
• /
• pp.199-216
• /
• 2015

The current research suggests a new service research framework for service researchers and practitioners. A comprehensive and streamlined research framework is essential for rapid growth of service industry with support of academic researches. An in-depth analysis on relevant service research fremeworks and major research issues on service sector and service nature has been performed. Past and present research frameworks on service sector have been reviewed based on the nature of service and the desirability for service industry development. A new research framework has been derived and a five-section model has been suggested. The results of this research can be used for finding useful research topics in service sector. Future research is needed to develop service research as a solid and major academic field in the new economy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.938-945
• /
• 2004

On the relationship between the red tide occurrence and the oceanographic factors in the middle coastal area in the South Sea of Korea, the favorable oceanographic conditions for the red tide formation are considered as follows； the calm weather increases sea water temperature in summer and early-fall which the red tide occurs frequently, and the heavy precipitation brings some riverine water to ween: low salinity, high suspended solid, low phosphorus and high nitrogen, respectively. We decided the potential areas in the coastal zones vulnerable to the red tide occurrence based on the limited factors controlling the growth of phytoplankton. By using GIS through the overlap for three subject figures (phosphorus, nitrogen and suspended solids), it was founded that the potential areas are the Yeosu∼Dolsan coast, the Gamak bay, the Namhae coast, the Narodo coast, the Goheung and Deukryang bay. This result has very well coincided to the results of the satellite and in-situ data.