• The korean journal of orthodontics
• /
• v.3 no.1
• /
• pp.14-20
• /
• 1972

It is well known fact that physical growth and development of children are influenced by many factors. The importance of socio-economic, geographic and cultural background cannot be over-emphasized in the evaluation of general pattern of physical growth and development of children. In this study the author measured and studied the body height and body weight of children living in the region of mine and industry located in Young-Wol Kun, Kang-Won Do, for the purpose of exploring out the influence of socio-geographic factors to act on physical growth and development of children. Total number of samples were 4,147 comprising 2,170 in male and 1,977 in female with ages ranging from 7 to 15. 1) The growth curves showed that young males grow slowly by 14 years of age, here-after rapidly and the young females grow slowly by 12 years of age, rapidly by 13 years of age and slowly thereafter. 2) The annual increment curves of body height and body weight showed that the most increment of female occurs by 13 years of age and that of mate, by 15 years of age. 3) The growth curves of the male and female crossed twice. It shows the difference of the pattern of growth between the both sexes. 4) The standards for the children in this region were presented. 5) The time of changes of stndard deviation curves of body height and body wegiht coincided nearly with that of annual increment. 6) Body weight and body height .of the children is larger than that of Korean children before World War II, but smaller than that of standards of recent Korean.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.9
• /
• pp.1078-1085
• /
• 2011

Prediction of a minimum crack size for growth, which is defined as a crack size that grows fast enough to keep ahead of its removal by contact wear and periodic grinding, is the most demanding work to prevent rail from fatigue failure and develop cost effective railway maintenance strategy In this study, we investigated the wheel load increment due to a rail defect during a train ran over it, and its effect on the minimum crack size for growth. For this purpose, we developed simulation software based on the Fletcher and Kapoor's "2.5D" model and measured wheel load increment during a train passed over a defect. A maximum contact pressure and contact patch size were calculated by 3D FEM and crack growth analyses were performed by varying two of dominant contact contributors; surface friction coefficient(0.1, 0.2, 0.3 and 0.4) and crack aspect ratio. The minimum crack sizes for growth were calculated from 0.29 to 1.44mm depending on the contact conditions. They were decreasing with increasing surface friction coefficient and decreasing with crack aspect ratio(a/b).

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.603-615
• /
• 1992

This study was undertaken to investigate the interrelationship between the growth change of mandible and the developmental age of growing girls in the longitudinal data from 7 years to 15 years. The data were obtained from maturation stage of cervical vertebrae through the serial lateral cephalogram, height increment records which was taken at one year interval, menarche date through interview. On the basis of findings of this study, the following conclusions were obtained. 1. In general the growth of mandible (Ar-Pog, Ar-Go, Go-Pog) showed two peaks of growth velocity. 2. The maximum growth of mandible (Ar-Pog, Ar-Go, Go-Pog) almost appeared between stage 3 and stage 4 in maturation of cervical vertebrae. 3. It showed the tendency that the maximum increment of height appeared faster than that of mandible (Ar-Pog, Ar-Go, Pog-Go). 4. The maximum growth of height almost appeared between stage 2 and stage 3 in maturation of cervical vertebrae. 5. It showed the tendency that the menarche appeared later than the maximum growth of mandible (Ar-Pog, Ar-Go, Pog-Go). 6. The menarche almost appeared at stage 4, stage 5 in maturation of cervical vertebrae.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.96-104
• /
• 1992

Aircraft structures and engineering structures are always subject to variable amplitude loads. Variable amplitude loads include some kind of loading history; for example, constant amplitude load, single peak overload and block overload etc. Crack growth under variable amplitude loading exhibits retardation effect. In this study, the 4 point bending fatigue test was performed by hydrolic servo fatigue testing machine on 7075-T6 Al-alloy. The retardation effect of overload ratio and numbers of overload cycle was quantitatively studied. 1) Change of retardation effect against increment of overload ratio is more evident when the multiple overload is applied than single overload is done. 2) The number of overload cycle is very important factor about the crack growth retardation effect when the overload ratio is more than 1.75; that is not when the overload ratio is less than 1.75. 3) Overload affected zone size increased gradually by increment of crack growth retardation effect. 4) Crack driving force is more greatly reduced when the crack tip branched off two direction than it sloped to one direction.

• Journal of Nutrition and Health
• /
• v.22 no.2
• /
• pp.108-117
• /
• 1989

The purpose of this study was aimed to investigate the historical tends of population growth which has reflected direct effect of the ratio of food self sufficiency in Korea between the year of 1910 and 1980. Author divided the whole years between 1910 and 1980 into five different periods ; colonial period from 1910 to 1945, post colonial period from 1945 to 1950, Korean war period from 1950 to 1955, post Korean war period from 1955 to 1960, fast economic growing period 1960~1980. The ratio of national food self sufficiency has been profoundlly affected by dual factors ; rate of population group and increment of GNP which reflect the national economic development. Total food production never reached the level of population growth ratio in Korea. As a result food demand and supply has shown imbalaced condition which leads to import foods from outside contury to compensate food shortage. The increment of GNP sharply cut down the cereal consumption. The consumption of fish, milk, eggs and meat reflected to increase since 1970.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.4
• /
• pp.39-46
• /
• 1988

The purpose of this paper is to apply the boundary element method to predict the crack growth path. The quarter point element with traction singularity at the crack tip is applied to compact tension type specimens and two inclined slit problems under compression load. The maximum stress criterion which was originally derived for the crack initiation is extended to the analysis of the crack propagation. The predicted crack paths with 1/4 crack growth increment of initial crack length agree quite well with experimental results. It is found that the computed crack path of the boundary element analysis is not mainly affected by the crack increment length.

• Journal of Ecology and Environment
• /
• v.32 no.2
• /
• pp.109-113
• /
• 2009

Tree-ring width analysis has been used to assess the effects of air pollution on tree growth around industrial complexes. Our study was conducted to elucidate the effect of air pollutants on annual ring growth in black pines (Pinus thunbergii) of age 41$\sim$48 years around Ulsan Metropolitan City. The growth data were analyzed by multiple regression and the results are as follows: 1. The annual ring increment of black pines increased with tree age until age 40 years and then decreased gradually after age 40 years. 2. The increment of annual ring width of black pines was affected more by precipitation and evapotranspiration than air temperature. An annual ring decline appeared in the years 1968$\sim$1983, when annual ring indices below zero were observed. Decreased annual ring growth during this period may have been due to air pollution. 3. The heavy metal with the strongest effect on annual ring growth of black pines in the experimental stand was lead (Pb). The concentration of lead in the stand was estimated as over 6 ppm. 4. The technique of tree-ring width analysis may be useful for estimation of the extent of pollution in forest areas near industrial complexes.

• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.165-183
• /
• 1987

The purpose of this study is to investigate the cephalo-facio-dental relationships in the craniofacial complex and their changes with age, and to use them for diagnostic and treatment purposes in the orthodontics The author studied on the changes of the cephalo-facio-dental relationships, using serial lateral cephalometric roentgenograms of 46 boys and 47 girls aged from 6 to 11 years of normal Korean children Following results were obtained 1 Means and Standard deviation of Korean children were obtained. 2 In the evaluation of the craniofacial vertical proportions, lower anterior face was larger than the upper, and upper posterior face was larger than the lower at all ages 3 The growth change was more prominent in the anterior craniofacial vertical proportion than in the posterior, and growth increment in the upper anterior facial height dimension was larger than m the lower anterior. 4 In the evaluation of the craniofacial horizontal proportion, ANS, Pog, Go and 6 were all situated posterior to their reference ares, and point B was always situated anterior to the arc passing by point A. 5. Anteroposterior growth change was the most prominent in the mandible, and there was no significant difference between the horizontal growth increment in the cranial base and that in the maxilla 6 Growth increment in the horizontal direction was larger in the mandibular apical base than in the maxillary apical base 7 The upper central incisor and the upper first molar were gradually anterior positioned against their reference ares with age increase 8 The length of mandibular corpus was larger than that of cranial base from the seven years old, and the difference was increased as the age increased 9 With age, there was slight difference in the angular relationships formed by craniofacial reference planes and axial inclinations of upper and lower permanent teeth.

• The korean journal of orthodontics
• /
• v.4 no.1
• /
• pp.31-40
• /
• 1974

The age of maximum growth increments-the adolescent spurt-is not only of developmental interest but is used as a marker for timing other growth events. And the mandibular growth rate follows the general growth curve, it is essential for an orthodontist to take the current and exact information about physical growth of patients. The author measured and studied the body height and weight of 11,694 children living in Seoul, and calculated out the mean, standard deviation, coefficient value, annual increments, percentage increments of each value, and made diagram to compare it with others. 1. The growth curve shows linear increment tendency until 17 years of age in male, 15 years in female. 2. The annual increment curves of body height and weight reveals the most peak value in 14-16 years in male and 11-14 years in female. 3. During 11-14 years of age, female growth exceed the male growth in the body height growth. And in weight growth, female growth exceed the male growth during 6-7 years and 11-12 years to show twice crossing. 4. It seemed that until 11-12 years in male and until 9-10 years in female the height growth show the priority to weight growth. And from 17 years in male and 15 years in female the body growth reveals the balanced growth pattern. 5. The time of changes of standard deviation curves of body height and weight coincided with that of annual increments. 6. The prominent high value of body height and weight in the comparison with other data may be due to the secioeconomical and nutritional, environmental influence. 7. The growth accerlation phenomena was detectable.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.103-111
• /
• 1990

This paper presents a methodology for predicting stable crack growth and instability of a cracked body under monotonically increasing load. It is based on a model that incremental crack extensions and load increments after fracture initiation occur by turns in sequence and the criterion that the crack grows by an incremebt .delta.a when the opening displacement at the current crack tip increases by a critical value V$_{c}$. It is shown that the value I$_{c}$ = V$_{c}$/ .delta. a is a material constant characterizing ductile crack growth resistance. Along with the fracture initiation toughness value, the constant is used for the calculation of the loads against crack extensions by adding up each increment. The specimen failure is defined to occur when the necessary load increment for crack extension is zero or when the limit load in the current ligament is reached. The predicted failure loads are in good agreement with the avaliable experimental failure loads for the compact and center-cracked tension specimens of 7075-T651, 2024-T351 aluminum alloys and 304 stainless steel.steel.