• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.5
• /
• pp.663-669
• /
• 2008

A rapid growth of automobile industry has become a major cause for the environmental pollution of big cities, which has driven the emission regulation into extreme. The study of alternative fuel is one of the many researches for improving car emissions. In this study, the effect of an ethanol mixing rate on the engine performance of exhaust emissions, fuel consumption and a maximum torque is assessed for a gasoline engine without any retrofit. The result shows that maximum torque is not reduced in the range of ethanol mixing rate of 10 to 15%. CO and NOx is reduced with the increase of ethanol mixing rate and the fuel consumption remains in similar level.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.437-443
• /
• 2014

Engine is one of the most important parts in a rocket for completing its mission successfully. In this paper, we provide a methodology for estimating reliability and development cost of a liquid rocket engine newly developed. To estimate reliability, a baseline engine is selected considering factors whose effects on reliability are unquantifiable. Then reliability of a baseline engine is adjusted to reflect the effect of factors that can be modeled quantitatively. Using the previous Transcost engine cost expressed in terms of mass and the number of hot firing tests, the engine development cost is reexpressed in reliability and thrust requirements. Finally, a numerical example is given to illustrate the application of the methodology to a turbopump rocket engine using staged combustion cycle with LOX/LH2 propellant.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.863-866
• /
• 2011

Recently environmental issue is more and more emphasized and 'Green Growth' became on of the key words of this Government. Based on this trend, the exhaust gases out of the gas generator cycle and the staged combustion cycle LRE whose propellants are kerosene and LOx were compared. For this purse, 8 tonf class of each cycle engine was designed and the amount and the components of the gases were investigated by using CEA. As expected, the staged combustion cycle engine generates less pollutants than the other cycle. In addition, the graphite that is generated by the gas generator can be reacted with the oxygen in the atmosphere creating additional pollutants.

• The Journal of Korea Robotics Society
• /
• v.2 no.4
• /
• pp.346-352
• /
• 2007

As the new industry of this 21centuries, theme park is the important position to the front leader countries as a new growth engine due to its industrial-economical and cultural-social effect. While domestic theme park industries show lower competitive position with global theme park in aspect of management and qualities and have weak brand power. The global situation of present service robot industry of the world is the beginning stage and the time for strengthening competitive position and the best opportunity becoming global leader of world markets by prior occupation through provision of factitious market creating big demand. Robot theme park is possibile to provide such big demand of various robot and this paper present of ideas for robot theme park.

• The Journal of Korea Robotics Society
• /
• v.2 no.1
• /
• pp.103-108
• /
• 2007

Intelligent Robot is considered as one of the Next Generation Growth Engine in many countries. The application fields are expected to be widen from 80's robotics for manufacturing to many applications such as military, space, medical, personal, etc. To reduce the R&D investment risk Technical Roadmap is prepared by Japan, Europe and Korea. In this paper, the technical Roadmap of the countries was analysed to get the idea of future of Robotics. Robotics is considered as one of solutions of future aged society. Robot can assist and company with elderly people in the near future. On the other hand, Robot is considered as a core technology of manufacturing competitive power. Industrial competitiveness also would be dependent on robot technology. Special Service robot has many application areas and each country has different target based on the situation. With the comparison of technical roadmap, we have suggested some ideas to improve Korea's roadmap.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2965-2970
• /
• 2008

Effects of split injection and oxygen-enriched air on soot emissions in a DI diesel engine were studied by the KIVA-3V code. When split injection is applied, the second injection of fuel into a cylinder results in two separate stoichiometric zones which increases soot oxidation. As a result, soot emissions are decreased with split injection. When oxygen-enriched air is applied together with split injection, higher concentration of oxygen helps secondary combustion which results in a higher temperature in the cylinder. The increased temperature promotes growth reaction of acetylene with soot but doesn't improve the acetylene formation during the second injection of fuel. As more acetylene is consumed in the growth reaction of acetylene, the net acetylene mass in the cylinder is decreased, which leads to a decrease of soot formation. With an increase of soot oxidation caused by split injection, the soot emissions are decreased significantly. However, to avoid excessive NOx emissions with increased oxygen concentration, the level of oxygen concentration should be lower than 22% in volume.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.11
• /
• pp.3054-3062
• /
• 1995

Recently, the improvement of fuel economy and the reduction of exhaust smoke and NOx have been successfully achieved by supplying diesel engines with emulsified diesel oil with water particles. In the present paper, the difference between the combustion of injected emulsified fuel and that of diesel oil spray is clarified by means of taking high-speed and color photographs of the flames in the engine cylinder. As the results, the two kinds of fuels show different combustion behavior each other in the growth of initial flame and in the termination of combustion process in the cylinder. Then, suitable combustion chamber design for the use of emulsified fuel is discussed on the basis of experimental data for various distribution of spray in different kinds of piston cavities. Some methods of clearing troubles caused by emulsified fuel injection are also discussed on the basis of performance tests with a remodeling test engine.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.3
• /
• pp.46-52
• /
• 2009

Nowadays, many components in automobile, aircraft, offshore structure and industry require lightness and high strength. However, since developments of advanced materials have limitations, it mainly is applying to method of surface hardening. This study offered research about camshaft that is one among engine important component. The material used in this study is 0.53% carbon steel as structure material of camshaft, splineshaft, coupling, pulley, driveshaft et cetera. Camshaft is processed using mainly carbon steel, and receives wear and fatigue by special quality high speed of parts. Therefore, camshaft need surface hardening to improve camshaft's fatigue life and increase durability of engine. This study compare to residual stress and martensite microstructure created by high frequency induction treatment, and these results lead to the conclusion of fatigue crack growth characteristics.

• Asia-Pacific Journal of Business
• /
• v.12 no.3
• /
• pp.281-294
• /
• 2021

Purpose - The purpose of this study was verifying the policy effects by field of innovative growth engines, focusing on the discussion of the relationship between government support and corporate R&D activities (substitute/complementary goods), and based on the results, policy recommendations for promoting private R&D were carried out. Design/methodology/approach - Through literature research, academic/theoretical discussions about relationship between government support and corporate R&D activities were synthesized. Next, survey data were collected for companies engaged in the field of innovative growth engines and empirical analysis was conducted on the relationship between government support and R&D activities in 13 major sectors. Findings - First, as a result of analyzing all companies regardless of sector, government R&D subsidies had a positive (+) relationship with R&D activities of companies engaged in innovative growth engines, that is, a complementary relationship. Next, as a result of performing empirical analysis by dividing the 13 fields, it was found that 9 fields were complementary goods in which government support had a positive (+) effect on the R&D activities of companies. On the other hand, in the remaining four fields, the effect of government support on corporate R&D activities was not statistically significant. Research implications or Originality - In order to promote R&D activities of companies in the 9 fields where government support acts as a complementary product, it is necessary to establish policies centered on direct government support. On the other hand, it would be more desirable to seek indirect support rather than direct support in the 4 fields where government support did not have a statistically significant effect on corporate R&D activities.

• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.55-64
• /
• 1989

The effect of discharge have been investigated for condition of spark in a multiple spark ignition engine, as the spark duration, capacitive and inductive discharge energy were calculated for condition of spark by ignition wave and energy formula. The useful portion of spark discharge is divided into capacitance portion and inductance portion. It was found that capacitive discharge energy and spark duration were increased according to increasing number of spark, and inductive discharge energy was increased according to increasing spark interval. Therefore engine torque was increase and lean misfire limit was extended comparing with the standard ignition system. It found that spark energy was discharged within ignition delay period availability acted on the formation and growth of flame kernel, and total spark energy was increased according to increasing number of spark times, but discharged spark energy after ignition delay became unavailable energy. And the capacitive discharge energy has the dominant effect for stoichiomeric or not very rich air-fuel mixture but inductive discharge energy has the dominant effect for lean air-fuel mixture.