• 한국재료학회지
• /
• 제22권12호
• /
• pp.706-710
• /
• 2012

The growing conditions of barium nitrate $Ba(NO_3)_2$ single crystals using the aqueous solution method have been studied. Supersaturation can be calculated by measuring the temperature of the solution and its equilibrium temperature. Supersaturation of $Ba(NO_3)_2$ was 0.7% at $32.0^{\circ}C$ and about 3% at $34.0^{\circ}C$. The obtained single crystals have three kind of morphology: tetrahedral, cubic, and, rarely, dodecahedral. The normal growth rate is proportional to the supersaturation; it is necessary to make the solution below 5% supersaturation in order to obtain transparent $Ba(NO_3)_2$ single crystals. The normal growth rate for {1$\bar{1}$1} faces was $2.51{\times}10^{-6}$ mm/s for the 0.7% supersaturation condition ($32.0^{\circ}C$), $6.43{\times}10^{-6}$ mm/s for the the condition of 3.0% supersaturation, and $7.01{\times}10^{-6}$ mm/s for the condition of 5.0% supersaturation. The quality of the grown crystals depends on the nature of the seed, the cooling rate employed, and the agitation of the solution. The faces of the obtained crystals have been identified uising an X-ray diffractometer. The surface diffusion is responsible for the low growth rates of the {1$\bar{1}$1} faces.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권4호
• /
• pp.426-435
• /
• 2005

The lightness of components required in automobile and machinery industries is requiring high strength of components. Therefore this requirement is accomplished as the process of shot-peening method that the compressive residual stress is made on the metal surface as one of various improvement methods. Special research is, therefore, needed about compressive residual stress on the metal surface in the process of shot-peening method. Therefore, in this paper the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in environmental condition(temperature) and mechanical condition(shot velocity, stress ratio) was investigated with considering fracture mechanics. By using the methods mentioned above, the following conclusions have been drawn. (1) The fatigue crack growth rate(da/dN) of the shot-peened material was lower than that of the un-peened one. In high temperature range. fatigue crack growth rate decreased with increasing temperature range, while fatigue crack growth rate increased by decreasing temperature in low temperature. (2) Fatigue life shows more improvement in the shot-peened material than in the un-peened material. And compressive residual stress of surface on the shot-peen processed operate resistance force of fatigue crack propagation.

• 한국축산식품학회지
• /
• 제35권6호
• /
• pp.815-823
• /
• 2015

This study developed probabilistic models to describe Listeria monocytogenes growth responses in meat products with low concentrations of NaNO₂ and NaCl. A five-strain mixture of L. monocytogenes was inoculated in NBYE (nutrient broth plus 0.6% yeast extract) supplemented with NaNO₂ (0-141 ppm) and NaCl (0-1.75%). The inoculated samples were then stored under aerobic and anaerobic conditions at 4, 7, 10, 12, and 15℃ for up to 60 d. Growth response data [growth (1) or no growth (0)] for each combination were determined by turbidity. The growth response data were analyzed using logistic regression to predict the growth probability of L. monocytogenes as a function of NaNO₂ and NaCl. The model performance was validated with the observed growth responses. The effect of an obvious NaNO₂ and NaCl combination was not observed under aerobic storage condition, but the antimicrobial effect of NaNO₂ on the inhibition of L. monocytogenes growth generally increased as NaCl concentration increased under anaerobic condition, especially at 7-10℃. A single application of NaNO₂ or NaCl significantly (p<0.05) inhibited L. monocytogenes growth at 4-15℃, but the combination of NaNO₂ or NaCl more effectively (p<0.05) inhibited L. monocytogenes growth than single application of either compound under anaerobic condition. Validation results showed 92% agreement between predicted and observed growth response data. These results indicate that the developed model is useful in predicting L. monocytogenes growth response at low concentrations of NaNO₂ and NaCl, and the antilisterial effect of NaNO₂ increased by NaCl under anaerobic condition.

• Journal of Welding and Joining
• /
• 제6권4호
• /
• pp.27-34
• /
• 1988

The objective of this paper is to investigate the effect of residual stress on fatigue crack growth behavior. For this purpose, submerged arc welding was performed on SM50A steel plate and post weld heta treatment (PWHT) was followed. Residual stress distribution on the weld plate was determined by a hole drilling method and a series of .DELTA.P-const. and .DELTA.K-decreasing fatigue test were performed on the three different regions, i.e. weld metal, HAZ and base metla. Following conclusins were achieved. 1. In "as welded" specimens, tensile residual stresses were produced in the center portion of the specimen while compressive residual stresses were produced near the edges. In PWHT specimens, however, most of the residual stresses were disappeared. 2. The fatigue crack growth behavior in low .DELTA.K region was considerably affected by the presence of residual stress in both "as welded" and PWHT specimens. 3. Because of the relaxation of residual stresses in PWHT condition, the values of m increased from 2.62-2.78 (in the "as welded" condition) to 3.57-3.91 (in the "PWHT" condition)3.91 (in the "PWHT" condition)condition)

• Fisheries and Aquatic Sciences
• /
• 제21권3호
• /
• pp.12.1-12.15
• /
• 2018

A preliminary investigation of length-weight relationship, condition factor and reproductive ecology of African pike fish, Hepsetus odoe, was conducted between June to August 2010 in Lake Eleiyele. A total of 90 samples of the fish species were caught by fishermen using gill nets. The results obtained showed that fish species had isometric growth pattern (contrary to negative allometry expected) with the growth exponent, b value of 2.64, that is not statistically different from 3 and with high statistical power of 0.866 when tested. The mean condition factor, K, was found to be 2.6, indicating that the fish species were in good condition in the study area. For reproductive biology, mean fecundity and gonadosomatic index were found to be 1349 eggs and 3.53% respectively. This study was necessary to fill the knowledge gap and provide information for management and conservation of the investigated species in the lake system. This study recommended that further research needs to be conducted because the sampling was carried out in the rainy season period and within a quarter of a year.

• 한국결정성장학회지
• /
• 제25권1호
• /
• pp.1-5
• /
• 2015

AlN 단결정의 특별한 용도로 이를 개발하기 위한 노력이 전 세계적으로 매우 활발하게 이루어지고 있다. 이러한 AlN을 기반으로 하는 자외선 LED는 생활, 의학, 자동자 등에 유용한 용도로서 살균, 정화, 경화 및 분석 등 분야에 이용된다. 이에 실험을 통해 PVT법으로 카본 도가니를 사용하여 AlN 단결정을 성장시켰으며 실험 중 3가지 형태의 도가니를 이용하여 성장에 미치는 영향을 분석하였으며, 그 온도 조건은 $1900{\sim}2100^{\circ}C$이고 실험 압력으로는 1~200 Torr였다. 그 결과, 높이가 높은 형태의 도가니를 사용할 경우 증발량은 기준 형태보다 증가 하는데 그쳤다. 반면, 넓은 형태의 도가니는 더욱 많은 증발양의 증가를 보였으며, 기준 형태에 비하여 훨씬 안정하다는 것을 알았다. 또한, 제한된 크기의 도가니를 이용한 PVT법에서의 도가니 형태의 변화에 따른 결과는 성장률에 따른 최적 조건, 성장 결정의 품질변화 및 성장 조건 안정성에 영향을 주는 것을 알았다.

• 식물조직배양학회지
• /
• 제28권6호
• /
• pp.305-310
• /
• 2001

본 실험은 지치 (Lithospermum erythrorhizon)의 뿌리조직으로부터 유도한 캘러스에 ${\gamma}$선을 조사하여 배양기간과 배지조성 및 명.암배양의 조건에 따라 ${\gamma}$선 조사가 캘러스 생장촉진 효과가 있는지를 검토하고자 수행하였다. 지치의 캘러스 생장은 전체적으로 암배양에서보다 명배양에서 효과적이었다. r선 조사에 의한 효과에 있어서는 LLB2N2배지의 8 Gy에서 캘러스의 생장에 효과가 가장 좋았고, LLK2I0.2배지에서는 16 Gy에서 캘러스 생장효과가 좋았지만 암배양에서의 ${\gamma}$선처리 효과는 없었다. 명배양에서 LS배지에 BA 1 mg/L와 NAA 1 mg/L를 첨가할 경우, BA 2mg/L와 NAA 2 mg/L를 첨가할 때보다 캘러스의 생장효과가 있었으나, 암배양에서는 차이가 없었다. 특정선량에 대한 BA와 NAA의 농도에 있어서는 각각 2 mg/L가 효과적인 것으로 나타났다. MK2I0.2배지는 0.5 Gy와 1 Gy에서 캘러스의 생장에 효과적이었으나, 기본배지의 종류에 있어서는 MS배지보다 LS배지에서 더 효과적이었다. M-9배지에서는 명배양에서도 캘러스의 생장은 저조하였으나, 16 Gy 및 30 Gy에서 캘러스의 생장이 30%이상 증가하였다. 암배양에서는 ${\gamma}$선 조사에 의한 캘러스의 생장효과는 거의 없었다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.271-284
• /
• 1999

As a semiconductor material for electronic devices operated under extreme environmental conditions, silicon carbides (SiCs) have been intensively studied because of their excellent electrical, thermal and other physical properties. The growth characteristics of single-crystalline 4H-SiC homoepitaxial layers grown by a thermal chemical vapor deposition (CVD) were investigated. Especially, the successful growth condition of 4H-SiC homoepitaxial layers using a SiC-uncoated graphite susceptor that utilized Mo-plates was obtained. The CVD growth was performed in an RF-induction heated atmospheric pressure chamber and carried out using off-oriented substrates prepared by a modified Lely method. In order to investigate the crystallinity of grown epilayers, Nomarski optical microscopy, Raman spectroscopy, photoluminescence(PL), scanning electron microscopy (SEM) and other techniques were utilized. The best quality of 4H-SiC homoepitaxial layers was observed in conditions of growth temperature 1500$^{\circ}C$ and C/Si flow ratio 2.0 of C3H3 0.2sccm & SiH4 0.3sccm. The growth rate of epilayers was about 1.0$\mu\textrm{m}$/h in the above growth condition.

• 한국재료학회지
• /
• 제31권9호
• /
• pp.488-495
• /
• 2021

Solid state grain growth (SSCG) is a method of growing large single crystals from seed single crystals by abnormal grain growth in a small-grained matrix. During grain growth, pores are often trapped in the matrix and remain in single crystals. Aerosol deposition (AD) is a method of manufacturing films with almost full density from nano grains by causing high energy collision between substrates and ceramic powders. AD and SSCG are used to grow single crystals with few pores. BaTiO₃ films are coated on (100) SrTiO₃ seeds by AD. To generate grain growth, BaTiO₃ films are heated to 1,300 ℃ and held for 10 h, and entire films are grown as single crystals. The condition of grain growth driving force is ∆G_max < ∆G_c ≤ ∆G_seed. On the other hand, the condition of grain growth driving force in BaTiO₃ AD films heat-treated at 1,100 and 1,200 ℃ is ∆G_c < ∆G_max, and single crystals are not grown.

• The Korean Journal of Ecology
• /
• 제21권5_2호
• /
• pp.491-499
• /
• 1998

An investigation was performed to establish the mathematical theories of a vibration for the plant growth and a wave distribution of a plant population on the boundary condition of a limiting factor in the environment. The mathematical theories of the plant growth vibration and wave distribution had been elucidated by the plant growth and the timber line on the middle slope of the west side of Mt. Paektu. The Betula ermaruii composes the timber line on about 2,060 m elevation of sea label, has a growth vibration on the ground surface and takes a wave distribution due to a boundary condition of alpine temperature gradient.