• Journal of Environmental Impact Assessment
• /
• v.29 no.3
• /
• pp.157-181
• /
• 2020

Sediments from rivers, lakes and marine ports serve as end points for pollutants discharged into the water, and at the same time serve as sources of pollutants that are continuously released into the water. Until now, the contaminated sediments have been landfilled or dumped at sea. Landfilling, however, was expensive and dumping at sea was completely banned due to the London Convention. Therefore, this study applied contaminated sedimentation soil of 'Royal Palace Livestock Complex' as soil purification method. Soil remediation methods were applied to pretreatment, composting, soil washing, electrokinetics, and thermal desorption by selecting overseas application cases and domestically applicable application technologies. As a result of surveying the site for pollutant characteristics, Disolved Oxigen (DO), Suspended Solid (SS), Chemical Oxygen Demand (COD), Total Nitrogen (TN), and Total Phosphorus (TP) exceeded the discharged water quality standard, and especially SS, COD, TN, and TP exceeded the standard several tens to several hundred times. Soil showed high concentrations of copper and zinc, which promote the growth of pig feed, and cadmium exceeded 1 standard of Soil Environment Conservation Act. In the pretreatment technology, hydrocyclone was used for particle size separation, and the fine soil was separated by more than 80%. Composting was performed on organic and Total Petroleum Hydrocarbon (TPH) contaminated soils. TPH was treated within the standard of concern, and E. coli was analyzed to be high in organic matter, and the fertilizer specification was satisfied by applying the optimum composting conditions at 70℃, but the organic matter content was lower than the fertilizer specification. As a result of continuous washing test, Cd has 5 levels of residual material in fine soil. Cu and Zn were mostly composed of ion exchange properties (stage 1), carbonates (stage 2), and iron / manganese oxides (stage 3), which facilitate easy separation of contamination. As a result of applying acid dissolution and multi-stage washing step by step, hydrochloric acid, 1.0M, 1: 3, 200rpm, 60min was analyzed as the optimal washing factor. Most of the contaminated sediments were found to satisfy the Soil Environmental Conservation Act's standards. Therefore, as a result of the applicability test of this study, soil with high heavy metal contamination was used as aggregate by applying soil cleaning after pre-treatment. It was possible to verify that it was efficient to use organic and oil-contaminated soil as compost Maturity after exterminating contaminants and E. coli by applying composting.

• Korean Security Journal
• /
• no.21
• /
• pp.155-175
• /
• 2009

RFID that provide automatic identification by reading a tag attached to material through radio frequency without direct touch has some specification, such as rapid identification, long distance identification and penetration, so it is being used for distribution, transportation and safety by using the frequency of 125KHz, 134KHz, 13.56MHz, 433.92MHz, 900MHz, and 2.45GHz. Also it is one of main part of Ubiquitous that means connecting to net-work any time and any place they want. RFID is expected to be new growth industry worldwide, so Korean government think it as prospective field and promote research project and exhibition business program to linked with industry effectively. RFID could be used for access control of person and vehicle according to section and for personal certify with password. RFID can provide more confident security than magnetic card, so it could be used to prevent forgery of register card, passport and the others. Active RFID could be used for protecting operation service using it's long distance date transmission by application with positioning system. And RFID's identification and tracking function can provide effective visitor management through visitor's register, personal identification, position check and can control visitor's movement in the secure area without their approval. Also RFID can make possible of the efficient management and prevention of loss of carrying equipments and others. RFID could be applied to copying machine to manager and control it's user, copying quantity and It could provide some function such as observation of copy content, access control of user. RFID tag adhered to small storage device prevent carrying out of item using the position tracking function and control carrying-in and carrying-out of material efficiently. magnetic card and smart card have been doing good job in identification and control of person, but RFID can do above functions. RFID is very useful device but we should consider the prevention of privacy during its application.

• Korean Journal of Food Science and Technology
• /
• v.39 no.4
• /
• pp.432-437
• /
• 2007

In this study, we examined the conditions for an auto-aging system placed within a kimchi refrigerator for optimal fermentation, and to prolong the storage time of kimchi. Various characteristics of kimchi fermented at different temperatures ($5-23^{\circ}C$) were compared. We observed that the higher the fermentation temperature, the less desirable the overall acceptability of the product. To establish the time point in which to convert the fermentation mode to the storage mode, kimchi was stored at $-1^{\circ}C$ for 1 week once it reached the designated acidity (0.4, 0.6, and 0.8%). The results indicated that the lower the kimchi acidity, the higher the sensory score. The storage temperature of $-1^{\circ}C$ was not low enough to retard microorganism growth completely; however, the kimchi stored at $-2{\pm}0.5^{\circ}C$ became frozen. Accordingly, $15^{\circ}C$ and $-2{\pm}0.5^{\circ}C$ are suggested as the fermentation and storage temperatures for the kimchi refrigerator, respectively. A kimchi acidity of 0.4% can be used as an index for the time point to convert fermentation to storage. Subsequently, the time required for the fermentation course can be calculated based on this.

• Journal of Life Science
• /
• v.25 no.1
• /
• pp.53-61
• /
• 2015

In this study, we tried to separate the photosensitizer that induces apoptosis of leukemia cells (U937) from perilla leaves. Perilla leaves (Perilla frutescens Britt var. japonica Hara) are a popular vegetable in Korea, being rich in vitamins (A and E), GABA, and minerals. Dried perilla leaves were extracted with methanol to separate the photosensitizer by various chromatographic techniques. The structure of the isolated compound (PL9443) was identified by 1D-NMR, 2D-NMR, and FAB-mass spectroscopy. Absorbance of the UV-Vis spectrum was highest at 410 nm and was confirmed by the 330, 410, and 668 nm. PL9443 compound was determined to be pheophorbide, an ethyl ester having a molecular weight of 620. It was identified as a derivative compound of pheophorbide structure when magnesium comes away from a porphyrin ring. Observation of morphological changes in U937 cells following cell death induced by treated PL9443 compound revealed representative phenomena of apoptosis only in light irradiation conditions (apoptotic body, vesicle formation). Results from examining the cytotoxicity of PL9443 substance against U937 cells showed that inhibition rates of the cell growth were 99.9% with the concentration of 0.32 nM PL9443. Also, the caspase-3/7 activity was 99% against U937 cells with the concentration of 0.08 nM of PL9443 substance. The result of the electrophoresis was that a DNA ladder was formed by the PL9443. The PL9443 compound is a promising lead compound as a photosensitizer for photodynamic therapy of cancer.

• Journal of Life Science
• /
• v.30 no.2
• /
• pp.156-161
• /
• 2020

Since industrialization, the production and utilization of various chemicals has contributed to improving the quality of our lives, but the subsequent discharge of massive waste is inevitable, and environmental pollution is becoming more serious every day. Exposure to chemicals as a result of environmental pollution is having a negative effect on human health and the ecosystem, and cleaning up the polluted environment that can affect our lives is a very important issue. Toxic aromatic compounds have been detected frequently in soil, groundwater, and wastewater because of the extensive use of oil products, and phenol, which is used to produce synthetic resins, textiles, and dyes, is one of the major pollutants, along with insecticides and preservatives. Phenol can cause dyspnea, headache, vomiting, mutation, and carcinogenesis. Phenol-degrading bacterium DWB-1-8 was isolated from the activated sludge of textile wastewater; this strain was identified as Comamonas testosteroni by 16S rRNA gene sequencing. The optimal culture conditions for the cell growth and degradation of phenol were 0.7% K₂HPO₄, 0.6% NaH₂PO₄, 0.1% NH₄NO₃, 0.015% MgSO₄·7H₂O, 0.001% FeSO₄·7H₂O, an initial pH of 7, and a temperature of 30℃. The strain was also able to grow by using other toxic compounds, such as benzene, toluene, or xylene (BTX), as the sole source of carbon.

• Weed & Turfgrass Science
• /
• v.4 no.3
• /
• pp.230-235
• /
• 2015

The experiment was conducted to elucidate the growth characteristics of sorghum in the different planting methods: direct sowing and transplanting (20 days after sowing, DAS). Weed weight was taken from three randomly chosen-2 plots 60 DAS (DAT). One time (20, 30 days after transplanting, DAT) and two times (10/20, 10/30, 20/30, 20/40 DAS) application of weeder machine (FRT 80E) were conducted for direct sowing and transplanting, respectively. In transplanting, the weed control efficacy of weeder machine at 90 DAT was about 67% (DAT 20), 57% (DAT 30) at one time and 87% at two times. The most effective application number was two times (20/40 DAT) followed by one time (20 DAT). However, when reviewing yield and economy, the frequency and times of using weeder machine were preferably one time and 20 DAT. Results with mechanical weed control have been particularly good in transplanted row crops such as sorghum. In direct sowing, the weed control efficacy of weeder machine 60 DAS was about 87% (10/20 DAS), 88% (10/30 DAS) and 82% (20/30 DAS) at two times, respectively. When reviewing yield and economy, the times and frequency of weeder machine were preferably two times, 10 and 30 DAS.

• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.205-217
• /
• 1996

Today in the industrial society, the urban park is the place for citizens' health, recreation, exercise, and education. This is a very important place as a fine sight and maintenance of public security. As the results of rapid economic growth during the last thirty years, citizens are in the age of material civilization and are challenged with many serious urban problems such as pollution, noise, traffic congestion, human alienation, etc. Rapid material civilization brought to citizens' mental and physical diseases. To some of the problems, it is necessary that we should have proper leisure and recreation facilities, and that we should have the active, positive posture to them. Especially we need the out door recreational spaces and facilities. But nowadays the urban parks are given little thought in spites of the necessity of parks which should be used as a recreational spaces in the urban areas. So, This study attempt to comprehend the function, quantity and quality of the urban park system in Taegu. It is clear that the quantity is inappropriate. Because of inappropriate disposition and management, its coefficiency of utilization is low. In view of the population and park ratio, Dong Gu, Nam Gu, Suseong Gu and Dalseong Gun have comparative good, environments. However, Dalseo Qu, Seo Gu and Jung Gu have less geographical features. There are some methods to provide expansion of the aggregate of urban parks. We can use the school-grounds and their facilities. which were moved from C.B.D. to the outskirts of Daegu, or some parts of urban redevelopment, or the riverside of Sincheon river. In the urban park-program, users' satisfaction-factors are analyzed. We must reconsider the efficiency. The above problems are improved. Active administration and inhabitants' Positive participation are demanded so that the sound development of cities and daily life-surroundings are promoted.

• Journal of Food Hygiene and Safety
• /
• v.35 no.5
• /
• pp.459-467
• /
• 2020

In this study, we investigated the changes in both ambient temperature and microbial contamination of fresh convenience foods (FCFs) caused by the behavior of consumers after purchase. According to consumer survey results, it took 0.5 to 3 h put the purchased FCF in a home refrigerator or consume it. Only aerobic bacteria and Staphylococcus aureus (below maximum permitted limit) were detected in FCFs obtained from a local market. During storage of FCFs in a vehicle trunk for up to 3 h. the external and internal temperatures of FCFs were found to be 19 and 18.5℃ in spring, 44 and 42℃ in summer, 31.3 and 29.2℃ in autumn, and 17.6 and 16.8℃ in winter, respectively. Changes in contamination levels of aerobic bacteria on FCFs stored in a vehicle trunk for up to 3 hours are as follows: 2.72 → 3.41 log CFU/g in spring, 3.11 → 4.32 log CFU/g in summer, 3.08 → 3.81 log CFU/g in autumn, 2.71 → 3.36 log CFU/g in winter. S. aureus exceeding the tolerance was detected even when the FCFs were stored in a vehicle trunk for 1 h in summer and autumn and 2 h in spring and winter. Among three boxes (corrugated box, styrofoam box, and corrugated box coated with an aluminum film), the styrofoam box maintained the lowest temperature and showed the lowest growth rate of microorganisms on FCF after storage for 3 h in the vehicle trunk depending on whether ice was added. These results indicated that the possibility of food poisoning occurs when FCFs are exposed to the external environment. It is necessary to provide guidelines regarding storage temperature and allowable time for safe consumption of FCFs after purchase.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.390-399
• /
• 2014

The objective of this study was to establish a processing technology for preserved leaves based on the results from the examination of the optimal period and condition for dye-absorbing treatment for Eucalyptus cinerea F. Mull. ex Benth. (silver dollar eucalyptus) being used frequently as plant material for flower design. Cut foliages of E. cinerea with uniformly matured leaves were cut into 20 cm lengths and their lower stem parts were placed in dye solution in growth chambers with different temperatures (10, 20, 30, and $40^{\circ}C$), vapor pressure deficits (VPD; 0.23, 0.70, 1.17, and 1.61 kPa), and photoperiods (0, 6, 12, 24 hours) for 3, 6, 9, and 12 days, and then dried in a room of $20^{\circ}C$ for three days. Lower temperature during preserving dye treatment reduced the changes in leaf color compared with fresh leaves and decreased ${\Delta}E$ value. Especially, high temperature increased red degree (a) and decreased yellow degree (b) due to browning. Lower VPD reduced the change in leaf color compared with fresh leaves and decreased ${\Delta}E$ value. Shorter photoperiod reduced the change in leaf color compared with fresh leaves and decreased ${\Delta}E$ value. The ${\Delta}E$ value increased with increasing absorbing duration under three environmental conditions. The flexibility of stem and leaves after dipped into preserving dye solution and dried for 3 days increased with decreasing temperature, VPD and dipping duration. Therefore, the optimal environment condition for dye treatment was 0.23-0.70 kPa VPD at $10-20^{\circ}C$ in the darkness, and the optimal and economical duration was 3 days. These conditions reduced the speed of water loss by decreasing transpiration, so yellowing or browning by rapid water loss deteriorated the quality of preserved leaves out of these ranges.

• Korean Journal of Ecology and Environment
• /
• v.38 no.1 s.110
• /
• pp.83-94
• /
• 2005

The objective of the study was to elucidate early life history of Rhinogobius brunneus, based on laboratory observations and field works, along with its courtship and spawning behaviors. The male and female fish matured were sampled for the lab experiments from Gap-Stream, which is one of the tributaries of Geum-River, Korea. The spawning behaviors and courtship of matured adults had a typical pattern; matured males of Rhinogobius brunneus built up spawning nests and had their own territory before the spawning, and the behavior then triggered the egg spawning of female with active courtship. The females attached elliptic egg mass as a single layer, on the stones below the spawning nest. After the spawning, the egg mass was guarded by males only until the hatching. The size of egg fertilized, measured by microscope was about 1.5${\pm}$0.1mm in length and 0.7${\pm}$0.1 mm in the egg's width. According to the lab experiments conducted under four temperature regime, the lapsed time for the hatching was shortened as temperatures increased in the treatments. On the contrary to the hatching time, the average length of newly hatched larvae showed a reverse relation with water temperature. The larvae, considered a final stage of the early life history was about 3.6 mm in total length for water temperature of $18^{\circ}C$, whereas they were between 3.1 mm and 3.2 mm for over $25^{\circ}C$. This indicates that higher water temperature may decrease the growth rate in the early life history. These results may provide valuable information for the population conservation and ecosystem protection under accelerated water pollution and habitat degradations in Korea.