• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.20-24
• /
• 2004

Antifatigue failure technology take an important the part of current industries. Currently, the shot peening is used for removing the defect from the surface of steel and improving the fatigue strength on surface. Therefore in this paper the effect of compressive residual stress by shot peening on fatigue crack growth characteristics in stress ratio(R=0.1, 0.3, 0.6)was investigated with considering fracture mechanics. There is difference between shot peening specimen and unpeening specimen. Fatigue crack growth rate of shot peening specimen was lower than that of unpeening specimen. Fatigue lift shows more improvement in the shot peening material than in the unpeening material. And compressive residual stress of surface on the shot peening processed operate resistance force of fatigue crack propagation. That is the constrained force about plasticity deformation was strengthened by resultant stress, which resulted from plasticity deformation and compressive residual stress in the process of fatigue crack propagation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.1
• /
• pp.101-106
• /
• 1996

This experiment was conducted to investigate the effect of bST administration on growth performance and carcass characteristics of finishing Korean native bulls. Fifty four Korean native bulls of about 14 months of age weighting an average 420 kg were assigned to receive no injection of bST, 250 mg of bST s.c. injection every week, or 500 mg bST s.c. injection every 2 weeks (Control, 250ST, 500ST) in a $3{\times}3$ randomized block design for a period of 20 weeks Animals administered with bST responded with decreased feed DMI by 8%(p < 0.01), increased ADG by 12%(p < 0.05), and increased gain/feed ratio by 20%(p < 0.01). But there was no significant difference in the growth performance between 250ST and 500ST. Administration of bST increased dressing percentage by 1.8%(p < 0.05), and tended to increase longissimus muscle area and decrease backfat thickness and marbling score.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.6
• /
• pp.878-881
• /
• 2002

The goal of the current research was to assess the influence of the growth rate of Nocardia amarae on its overall metal binding capacity. Batch sorption isotherms for cadmium (Cd), copper (Cu), and nickel (Ni) showed that Nocardia cells harvested from chemostat cultures at a dilution rate of $0.33d^-1$ had a significantly higher metal sorption capacity than cells grown at 0.5 and $1d^-1$. The cell surface area estimated using a dye technique indicated that pure N. amarae cells grown at a lower growth rate had a significantly more specific surface area than cells harvested from a higher growth rate operation. Accordingly, this difference in the specific surface area seemed to indicate that the higher metal sorption capacity of the slowly growing Nocardia cells was due to their higher specific surface area.

• East Asian mathematical journal
• /
• v.36 no.1
• /
• pp.81-90
• /
• 2020

Many compartment models assume a kinetically homogeneous amount of materials that have well-stirred compartments. However, based on observations from such processes, they have been heuristically fitted by exponential or gamma distributions even though biological media are inhomogeneous in real environments. Fractional differential equations using a specific kernel in Pharmacokinetic/Pharmacodynamic (PKPD) model are recently introduced to account for abnormal drug disposition. We discuss a tumor growth inhibition (TGI) model using fractional-order derivative from it. This represents a tumor growth delay by cytotoxic agents and additionally show variations in the equilibrium points by the change of fractional order. The result indicates that the equilibrium depends on the tumor size as well as a change of the fractional order. We find that the smaller the fractional order, the smaller the equilibrium value. However, a difference of them is the number of concavities and this indicates that TGI over time profile for fitting or prediction should be determined properly either fractional order or tumor sizes according to the number of concavities shown in experimental data.

• Journal of Plant Biology
• /
• v.12 no.2
• /
• pp.1-6
• /
• 1969

Effects of the special media on the mycelium growth in Agaricus campestris were studied. The results might be summarized as follows: 1. The mycelium growth fo Agaricus campestris were scarecely stimulated on the Peptone basal medium which was added 0.5gr. of Peptone and Dextrose basal medium which was added 1.5gr. of dextrose during the culture for 144 hours. 2. The mycelium of Agaricus campestris on the media which was added the several kinds of vegetable extracts showed a considerable growth for 144 hours. The order is as follows; Carrot-basal medium(4ml./100ml.)>Tomato-basal medium(2ml./100ml.)>Spinach-basal medium(3ml./100ml.). However, the spinach-basal medium among these three media were no significant difference.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.58-64
• /
• 2004

The purpose of this study is to predict the behavior of fatigue crack propagation as one of fracture mechanics on the compressive residual stress. We got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, and -10$0^{\circ}C$ in the range of stress ratio of 0.3 by means of opening mode displacement. There is a difference between shot peened specimen and unpeened specimen. Fatigue crack growth rate of shot peened specimen was lower than that of unpeened specimen. Shot peening is improve the resistance of crack growth by fatigue that make a compressive residual stress on surface. That is the constrained force about plasticity deformation was strengthened by resultant stress, which resulted from plasticity deformation and compressive residual stress in the process of fatigue crack propagation. Temperature goes down, fatigue crack growth rate decreased.

• Korean Journal Plant Pathology
• /
• v.10 no.4
• /
• pp.270-276
• /
• 1994

Mycelial growth resistant isolates of Botryosphaeria dothidea to benomyl showed 99~79% spore germination on the PSA media supplemented with 200~2,100 $\mu\textrm{g}$/ml of carbendazim and thiophanate-methyl to manifest the high cross-resistance in spore germination. Mycelial growth, 23~9 mm in colony diameter, also manifested the high cross-resistance of mycelial growth together with similarity of spore forming cross-resistance. Benomyl resistant isolates BR1, BR2 and BR3, grew 23~10 mm in colony diameter at 330~3,000 $\mu\textrm{g}$/ml of captafol, captan and oxine-copper showing the high double resistance of mycelial growth and spore formation with minor difference. However, within concentration range of the 3 fungicides tested, germinations of all the tested isolates were completely suppressed to show no double-resistance in the fungal spore germination.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.6
• /
• pp.559-563
• /
• 1999

Essential oil of Artemisia lavandulaefolia the chrysanthemum family plant used in the chinese medicine was extracted and antibacterial and antifungal activity with many kinds of the pathogenic bacterium and fungi was experimented by it. Ataphylococcus epidermidis and Streptococcus aureus gram positive bacterium at the concentration of 200ppm and Streptococcus mutans at the concentration of 1,000ppm showed the growth injibition effect of the cell. These showed statistically significant difference(p<0.05) Zymomonas mobilis Entrecoccus faecalis gram negative bacterium at the concentration of 200ppm and Pseudomonas putida at the concentration of 400ppm showedd the growth inhibition effect of the cell)p<0.05) V. Parahaemolyticus at the concentration of 800ppm and Pseudomonas aeruginosa at the concentration of 1,000ppm showed the growth inhibition effect of the cell(p<0.05) Candida albicans and Cryptococcus neoformans yeast-type fungi showed the gorwth inhibition effect of the cell at the concentration of 200ppm(p<0.05) Altenaria mali Aspergillus nidulans and Fusarium oxysporum filamentous fungi took the growth inhibition effect of the cell at the concentration of 600ppm, 400ppm, and 100ppm. respectively.

• Communications of Mathematical Education
• /
• v.15
• /
• pp.281-286
• /
• 2003

The primary purpose of this study was to investigate how and to what extent 'representations' affect the students' understanding and the growth of understanding in a technology [GSP]-based collegiate mathematics classroom. There are three themes related as frames of the study along with this purpose, which are mentioned in the first chapter and extended in the second chapter: technology in mathematics education; images on computer screen - visualization and representation; understanding and growth of understanding. Three research questions guided this study: 1) How do students present each component of representations when they study 'transformations' in a technology [GSP]-based classroom? If there is any difference between the first and second presentation for each component, how are they different?; 2) How and to what extent do representations affect the students' understanding and the growth of understanding in a technology [GSP]-based classroom?; What types of benefits and obstacles are there when students study 'transformations' in a technology [GSP]-based classroom?

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.85-90
• /
• 2003

Among rail defects, the transverse crack, which has been the most dangerous fatigue damage, is developed from shelling near the rail running face and grows perpendicular to the rail surface. Moreover, the crack has occurred frequently fatigue damage during winter. Therefore, to assure the safety of railway vehicles, it is necessary to investigate growth behavior of transverse crack for rail steel. In this study, fatigue crack growth behavior of rail steel and its gas pressure welded part at room and low temperature are performed. The fatigue crack growth rate of the welded part was lower than that of the base part within a lower ${\Delta}K$ region at both room and low temperature, and this difference decreases with increasing the ${\Delta}K$ due to the decrease of the fracture toughness.