• 대한토목학회논문집
• /
• 제40권1호
• /
• pp.97-103
• /
• 2020

저토피 철도터널구간의 안전 및 시공성을 고려한 굴착보조공법으로서 강관다단 그라우팅 기술이 선정되었다. 특히, 공사 중 과도한 주입압에 의한 지반파괴로 피해가 발생할 우려가 있어 기존 강관다단 그라우팅 공법을 새롭게 개선하여 적용하였다. 본 연구는 00공단에서 발주한 000노반시설 기타공사 구간 중 00안 고속도로 및 00휴게소(하행) 진입로 하부로 통과하는 토피고 11.3~12.1 m 두께의 저토피 철도터널 현장에서 수행하였다. 개선된 강관다단 그라우팅 공법은 새로운 한계주수시험법을 이용한 시공 전 시공조건 평가 기술, 절리의 간격평가, 적합한 주입압력 평가, 최적의 작업완료시간 평가, 주입유형분석에 의한 주입효과평가 기술 등이다. 개선된 강관다단 그라우팅 공법의 적용으로 터널굴착공사 중상부 저토피 구간의 도로를 원활하게 운영할 수 있는 근거를 마련할 수 있었다. 또한, 향후 저토피 구간의 터널강관다단 그라우팅 공사뿐만 아니라 다양한 터널(도로, 지하철, 공동구 등) 강관다단 그라우팅 공사에 적용될 수 있는 가능성을 확인하였다.

• 한국지반환경공학회 논문집
• /
• 제25권5호
• /
• pp.15-19
• /
• 2024

본 연구는 대심도 조건에서 고효율 그라우팅 기술 개발을 목표로 하여, 다양한 주입 재료의 적용 가능성을 실험적으로 검증하였다. 1종 보통 포틀랜드 시멘트(OPC)와 마이크로 시멘트(MC)의 입자 크기 분석 및 주입 모형 실험을 통해 각 재료의 주입성능을 평가했다. 국내 대심도 기준, 즉 지하 40미터 이하 조건에서 Barton's Cubic Network 이론을 활용하여 암반 절리 간격을 산정했으며, 선정된 조건에서 입자 크기의 통과 가능성을 분석한 결과, MC는 암반 절리 간격을 통과한 반면, OPC는 간극을 통과하지 못하였다. 실험 장치 및 면적 계산 프로그램을 활용한 주입 모형 실험 결과에 따르면, OPC는 입자 크기가 크기 때문에 주입에 실패한 반면, MC는 고점도 조건에서도 주입이 가능한 것으로 나타났다. 이러한 연구 결과를 바탕으로, 주입 재료에 따른 대심도 조건에서 그라우트 재료의 적용 가능성을 정량적 및 가시적으로 도출하였으며, 고점도 MC 재료는 대심도 암반 절리면 차수 보강에 효과적일 것으로 예상된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.899-904
• /
• 2009

This paper presents the analysis result of load-transfer mechanism and pile movements associated with the development of frictional resistance to understand the engineering characteristics of micropile behavior. An field load tests were performed for two different types of micropiles and they are (i) thread bar reinforcement with D=50mm and (ii) hollow steel pipe reinforcement with $D_{out}$=82.5mm and $D_{in}$=60.5mm and wrapped with woven geotextile for post-grouting. The load test results indicated that micropiling with pressured grouting provided better load-transfer characteristics than micropiling with gravity grouting under both compressive and tensile loading conditions in that unit skin frictional resistance is well distributed along installation depth. The unit weight and unconfined compressive strength of cured grout were obtained for each piling method. The strength and unit weight of micropile with pressured grouting was higher than those with gravity grouting. The fact that load bearing quality with pressured grouting is better than that of gravity grouting could be attributed to the dense mutual adhesion between surrounding ground and pile due to pressurized grouting method and better grout quality.

• Geomechanics and Engineering
• /
• 제8권1호
• /
• pp.113-132
• /
• 2015

In this study, lime (L), silica fume (SF), and lime-silica fume (L-SF) mix have been used for stabilizing and considering their effects on the soft clay soil. The improvement technique adopted in this study includes improving the behaviour, of a square footing over soft clay through grouting the clay with a slurry of lime-silica fume before and after installation of the footing. A grey-colored densified silica fume is used. Three percentages are used for lime (2%, 4% and 6%) and three percentages are used for silica fume (2.5%, 5%, 10%) and the optimum percentage of silica fume is mixed with the percentages of lime. Several tests are made to investigate the soil behaviour after adding the limeand silica fume. For grouting the soft clay underneath and around the footing, a 60 ml needle was used as a liquid tank of the lime-silica fume mix. Slurried silica fume typically contains 40 to 60% silica fume by mass. Four categories were studied to stabilize soft clay before and after footing construction and for each category, the effectiveness of grouting was investigated; the effect of injection hole spacing and depth of grout was investigated too. It was found that when the soft clay underneath or around a footing is injected by a slurry of lime-silica fume, an increase in the bearing capacity in the range of (6.58-88)% is obtained. The footing bearing capacity increases with increase of depth of grouting holes around the footing area due to increase in L-SF grout. The grouting near the footing to a distance of 0.5 B is more effective than grouting at a distance of 1.0 B due to shape of shear failure of soft clay around the footing.

• 한국철도학회논문집
• /
• 제2권4호
• /
• pp.9-19
• /
• 1999

The use of compaction grouting evolved in 1950's to correct structural settlement of buildings. Over the almost 50 years, the technology has been developed and is currently used in wide range of applications. Compaction grouting, the injection of a very stiff, 'zero-slump' mortar grout under relatively high pressure, displaces and compacts soils. It can effectively repair natural or man-made soil strength deficiencies in variety of soil formations. Major applications of compaction grouting include densifying loose soils or fill voids caused by sinkholes, poorly compacted fills, broken utilities, improper dewatering, or soft ground tunneling excavation. Other applications include preventing liquefaction, re-leveling settled structures, and using compaction grout bulbs as structural elements of minipiles or underpinning. In this paper, on the basis of the case history constructed in this year, a study has been performed to analyze the basic mechanism of the compaction grouting. Also, the effectiveness of the ground improvement and the bearing capacity of the compaction pile has been verified by the Cone Penetration Test(CPT) and Load Test. Relatively uniform compaction grouting column could be maintained by planning the quality control in the course of grouting. And, the Qualify Control Plan has been conceived using grout pressure, volume of grout and drilling depth.

• 한국지반환경공학회 논문집
• /
• 제4권4호
• /
• pp.45-51
• /
• 2003

암반 내에서 주입재는 토사지반에서와는 달리 절리면을 따라 맥상으로 주입되며 그 결과 암반 내의 불연속면의 특성을 변화시키게 된다. 그러므로 그라우팅 후 암반의 변형특성은 주입재가 주입되는 절리의 방향, 절리의 특성, 그리고 현지암반의 응력상태에 따라 달라지게 된다. 즉 그라우팅에 의한 보강효과를 정확히 평가하기 위해서는 암반 내의 불연속면의 특성과 주입재의 특성이 암반의 변형거동에 미치는 영향을 규명하여야 한다. 그러나 현재까지 현장에서 적용되고 있는 그라우팅공법은 시공자의 경험에 의존하고 있으며, 그 효과에 대한 검증도 현장에서의 탄성파속도 측정, 투수시험 등을 통하여 평가하고 있다. 따라서, 본 연구에서는 그라우팅에 의한 댐 기초 암반절리면의 전단변형특성을 파악하기 위해서 자연암석 절리면에 OPC(Ordinary Portland Cement)와 Micro Cement를 각각 주입하여, 주입재의 종류, 절리면 거칠기의 평균진폭(a)에 대한 주입두께(t)를 변화시켜가면서 암석절리면 직접전단시험을 실시한 실험결과들을 비교 분석하여 최대전단강도, 잔류전단강도 등의 전단특성에 미치는 영향에 대하여 검토하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 연약지반처리위원회 학술세미나
• /
• pp.1-11
• /
• 2000

The use of Compaction Grouting evolved in 1950's to correct structural settlement of buildings. Over the almost 50 years, the technology has been developed and is currently used in wide range of applications. Compaction Grouting, the injection of a very stiff, 'zero-slump' mortar grout under relatively high pressure, displaces and compacts soils. It can effectively repair natural or man-made soil strength deficiencies in variety of soil formations. Major applications of Compaction Grouting include densifying loose soils or fill voids caused by sinkholes, poorly compacted fills, broken utilities, improper dewatering, or soft ground tunneling excavation. Other applications include preventing liquefation, re-leveling settled structures, and using compaction grout bulbs as structural elements of minipiles or underpinning. In this paper, on the basis of the case history constructed in this year, a study has been performed to analyze the basic mechanism of the Compaction Grouting. Also, the effectiveness of the ground improvement and the bearing capacity of the Compaction Pile has been verified by the Cone Penetration Test(CPT) and Load Test. Relatively uniform Compaction grouting column could be maintained by planning the Quality Control in the course of grouting. And, the Quality Control Plan has been conceived using grout pressure, volume of grout and drilling depth.

• Computers and Concrete
• /
• 제20권3호
• /
• pp.275-282
• /
• 2017

Grouting is an operation often carried out to consolidate and seal the rock mass in dam sites and tunnels. One of the important parameters in this operation is grouting pressure. In this paper, analytical models used to estimate pressure are investigated. To validate these models, grouting data obtained from Seymareh and Aghbolagh dams were used. Calculations showed that P-3 model from Groundy and P-25 model obtained from the results of grouting in Iran yield the most accurate predictions of the pressure and measurement errors compared to the real values in P-25 model in this dams are 12 and 14.33 Percent and in p-3 model are 12.25 and 16.66 respectively. Also, SPSS software was applied to define the optimum relation for pressure estimation. The results showed a high correlation between the pressure with the depth of the section, the amount of water take, rock quality degree and grout volume, so that the square of the multiple correlation coefficient among the parameters in this dams were 0.932 and 0.864, respectively. This indicates that regression results can be used to predict the amount of pressure. Eventually, the relationship between the parameters was obtained with the correlation coefficient equal to 0.916 based on the data from both dams generally and shows that there is a desirable correlation between the parameters. The outputs of the program led to the multiple linear regression equation of P=0.403 Depth+0.013 RQD+0.011 LU-0.109 V+0.31 that can be used in estimating the pressure.

• 지질공학
• /
• 제11권1호
• /
• pp.81-99
• /
• 2001

터널의 차수그라우팅 효과를 확인하기 위하여 영천댐 도수터널 건설공사 중에 현장 그라우팅 시험을 수행하였다. 시험은 그라우팅 시기에 따라 굴착전, 굴착후 및 콘크리트 라이닝일 설치된 이후의 압밀 그라우팅 등으로 구분하였고, 주입재료, 암종 및 지질인자, 그라우팅공의 천공방향 및 주입단계에 따른 효과를 비교하도록 계획하였다. 재료의 특성에 따른 차수효과는 포틀랜드시멘트, 마이크로시멘트, 마이크로시멘트 마이크로시멘트+규산에 비해 우레탄이 가장 뛰어났으며, 시공시기에 따라서는 라이닝후 및 굴착후에 비해 굴착전 그라우팅시 차수효과가 뛰어났다. 암종에 따라서는 화산암 및 화강암지반에 비해 퇴적암지반에서 차수효과가 낮게 나타났는데 이는 퇴적암에 발달하는 절리틈새가 적고 절리 충전물이 많아서 주입재의 침투성 저조에 기인한 것으로 사료된다. RMR값과는 직접적인 상관성이 없으나 RMR 요소 중 절리틈의 간극이 클수록 차수효과가 높게 나타났다. 천공방향은 차수효과에 영향을 미치지 않았으나 주입방법은 천공 및 주입의 단계를 세분할 수록 높은 차수 효과를 기대할 수 있다.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.771-783
• /
• 2017

Using a transparent fracture replica with aperture size and water-cement ratio (w/c), the factors affecting the penetration behavior of rock grouting were investigated through laboratory experiments. In addition, the waterproof efficiency was estimated by the reduction of water outflow through the fractures after the grout curing process. Penetration behavior shows that grout penetration patterns present similarly radial forms in all experimental cases; however, velocity of grout penetration showed clear differences according to the aperture sizes and water-cement ratio. It can be seen that the waterproof efficiency increased as the aperture size and w/c decreased. During grout injection or curing processes, air bubbles formed and bleeding occurred, both of which affected the waterproof ability of the grouting. These two phenomena can significantly prevent the successful performance of rock grouting in field-scale underground spaces, especially at deep depth conditions. Our research can provide a foundation for improving and optimizing the innovative techniques of rock grouting.