• Journal of Ocean Engineering and Technology
• /
• v.22 no.1
• /
• pp.6-12
• /
• 2008

The dispersion and attenuation of Lamb and Leaky Lamb waves propagating in a 1 mm-thick steel plate were investigated. For acquiring a long(or large) range inspection capability, the fundamental symmetric and anti-symmetric wave modes(S0 and A0) over law frequencies were studied. Based on the dispersion curves, as well as pitch-catch and multi-mode simulations, it was shown that the S0 mode over law frequencies is the proper mode to minimize the dispersion and attenuation. In addition, it was shown that the S0 mode couldbe easily distinguished under multi-mode simulation since it has a larger group velocity than the A0 mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.825-832
• /
• 2000

광섬유 통신 시스템이 고속화되고 장거리를 전송하게 될 수록 편광모드 분산의 중요성은 더욱 부각되어 있다. 따라서 본 논문에서는 복굴절 광섬유에서 비선형 광펄스의 전파특성을 편광 모드 분산의 영향을 고려하여 시뮬레이션하였으며 이러한 현상이 발생되는 것을 알 수 있었다. 그리고 광섬유 비션형성에 의해서 GVD(Group Velocity Dispersion)와 마찬가기로 PMD(Polarization Mode Dispersion)에서도 부분적인 보상 현상이 나타남을 수치 결과를 통해 알 수 있었다. 이러한 광 전송 시뮬레이션을 구현하기 위해서 기존의 단계분할 푸리에 방식 (SS-FM, Split-Step Fourier Method)보다 장거리 전송시 오차의 발생이 적은 단계 분할 유한 요소법)SS-FEM, Split-Step Finite Element Method)을 적용하였으며, 또한 그 단점인 수행 속도를 개선한 희귀 행렬 근사 단계 분할 유한 요소법을 제안하였다. 그 결과 제안된 방법이 기존의 푸리에 연산법이나 일반적인 유한 요소법과 비교하여 더 빠른 수행 속도를 나타내는 것을 알 수 있었다.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.61.1-61.1
• /
• 2020

We examine the HI gas kinematics and distribution of galaxy pairs in group or cluster environment from high-resolution Australian Square Kilometre Array Pathfinder (ASKAP) WALLABY pilot observations. We use 22 well-resolved galaxies in the Hydra cluster of which 4 galaxies are visually identified as pairs and others are isolated ones. We perform profile decomposition of HI velocity profiles of the galaxies using a new tool, BAYGAUD which enables us to separate a line-of-sight velocity profile into an optimal number of Gaussian components based on Bayesian MCMC techniques. All the HI velocity profiles of the galaxies are decomposed into kinematically cold or warm gas components with their velocity dispersion, 4~8 km/s or > 8 km/s, respectively. We derive the mass fraction of the kinematically cold gas with respect to the total HI gas mass, f = log10(M_cold / M_HI), of the galaxies and correlate them with their dynamical mass. The cold gas reservoir of the paired galaxies in the Hydra cluster is found to be relatively higher than that of the isolated ones which show a negative correlation with the dynamical mass in general.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2293-2302
• /
• 2012

New optical transmission links technique for compensating of the distorted wavelength division multiplexed (WDM) signals due to group velocity dispersion (GVD) and self phase modulation (SPM) in single mode fiber (SMF) are proposed. The proposed optical links have optical phase conjugator (OPC) placed at nearby WDM transmitter or receiver and repeater spans with artificial distribution of SMF length and residual dispersion per span (RDPS). It is confirmed that optimal link configuration expanding effective launching power range and effective net residual dispersion (NRD) by improving system performance is that having OPC closely placed at WDM receiver and the gradually descended distribution of SMF length and RDPS of each repeater spans, related with the gradually increased optical link length. And, it is also confirmed that NRD is controlled by postcompensation in optimal optical link with OPC closely placed at WDM receiver.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.6
• /
• pp.117-123
• /
• 2009

This paper presents a numerical simulation of guided ultrasonic waves propagating in aluminum-epoxy-aluminum adhesive plates. In particular, this study investigated the effect of the epoxy thickness on the dispersive patterns, such as the phase velocity and group velocity of guided ultrasonic waves. In addition to investigating the dispersive curves, a numerical simulation using the pulse-echo method was carried out. This simulation showed that the degree of sensitivity of the epoxy thickness is dependent on the curvature of the phase and group dispersion curves, the maximum amplitude of the received time signals, and the peak frequency of the real components of the Fourier transform. Then, the linear relations between the epoxy thickness and the received and transformed signals were constructed to estimate the epoxy thickness.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.252-259
• /
• 1994

The method of calculating overlap dispersion caused by group velocity mismatch between uv and visible pulses in ultrafast pump-probe experiments is presented to discuss limitations of the time resolution and signal intensity. The calculations show arrangements using a single focusing lens shall result in undesirable time resolution and low signal intensity. Achromatic doublets result in unrealistic solutions. However, dramatic improvement in the time resolution and signal intensity is expected in the optical arrangements using separate lens for each pulse and in the arrangements using a cutoff secondary lens with a main lens. lens.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.158-164
• /
• 2014

For transmitting the ultra-high speed optical signals with better performance, the techniques to suppress or mitigate the signal distortion due to group velocity dispersion and optical Kerr effects are required. Dispersion management (DM), optical phase conjugation, and the combination of these two are promising techniques to compensate for the signal distortion. However, the fixed length of single mode fiber (SMF) and the fixed residual dispersion per span (RDPS) usually used in these optical links restricts flexible link configuration. The goal of this paper is to investigate the possibility of the flexible configurations of the ultra-high and long-haul optical transmission systems by using the artificial and the random distribution of SMF length and RDPS of each fiber spans consisted of the optical link. It is confirmed that the proposed link configurations should be one of the methods suitable for implementing the flexible optical transmission systems, however which depend on other link parameters, such as the averaged RDPS, and the launch power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2219-2226
• /
• 2013

Optical phase conjugation combining with dispersion management (DM) is promising technique to compensate for signal distortion due to group velocity dispersion (GVD) and nonlinear Kerr effects in optical communication systems. However the fixed residual dispersion per span (RDPS) usually used in the optical links with OPC and DM restricts the flexible link configuration. In this paper, OPC links combining DM of the randomly distributed RDPS is proposed for implementing the flexible optical transmission network. It is confirmed that the excellent compensation in the optical links with the randomly distributed RDPS is obtained, limiting the launch power of WDM channels to the relatively low. It is also confirmed that the relatively high launch power WDM channels are effectively transmitted through the optical links with the randomly distributed RDPS of averaged 50 - 100 ps/nm.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.559-562
• /
• 2010

A Lamb wave guided by a plate structure has dispersive characteristics because phase and group velocity change with the variation of frequency and thickness. The Lamb wave has two modes, symmetric and anti-symmetric mode, which propagated symmetrically and non-symmetrically with respect to centerline. In this paper, the Lamb wave velocity variation with respect to direction is investigated.

• Geomechanics and Engineering
• /
• v.15 no.1
• /
• pp.645-657
• /
• 2018

The paper aims to analyze the behaviour of torsional type surface waves propagating through fluid saturated inhomogeneous porous media clamped between two inhomogeneous anisotropic media. We considered three types of inhomogeneities in upper anisotropic layer which varies exponentially, quadratically and hyperbolically with depth. The anisotropic half space inhomogeneity varies linearly with depth and intermediate layer is taken as inhomogeneous fluid saturated porous media with sinusoidal variation. Following Biot, the dispersion equation has been derived in a closed form which contains Whittaker's function and its derivative, for approximate result that have been expanded asymptotically up to second term. Possible particular cases have been established which are in perfect agreement with standard results and observe that when one of the upper layer vanishes and other layer is homogeneous isotropic over a homogeneous half space, the velocity of torsional type surface waves coincides with that of classical Love type wave. Comparative study has been made to identify the effects of various dimensionless parameters viz. inhomogeneity parameters, anisotropy parameters, porosity parameter, and initial stress parameters on the torsional wave propagation by means of graphs using MATLAB. The study has its own relevance in connection with the propagation of seismic waves in the earth where fluid saturated poroelastic layer is present.