• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.1144-1156
• /
• 2014

In Internet, IP multicast has been used successfully to provide an efficient, best-effort delivery service for group communication applications. However, applications such as multiparty private conference, distribution of stock market information, pay per view and other subscriber services may require secure multicast to protect integrity and confidentiality of the group traffic, and validate message authenticity. Providing secure multicast for group communication is problematic without a robust group key management. In this paper, we propose a group key management scheme based on the secret sharing technology to require each member by itself to generate the group key when receiving a rekeying message multicast by the group key distributor. The proposed scheme enforces mutual authentication between a member and the group key distributor while executing the rekeying process, and provides forward secrecy and backward secrecy properties, and resists replay attack, impersonating attack, group key disclosing attack and malicious insider attack.

• Current Photovoltaic Research
• /
• 제12권2호
• /
• pp.37-40
• /
• 2024

One of the current innovation trends in the solar industry is the increase in the size of silicon wafers. As the wafer size increases, the series resistance of the module rises, highlighting the need for research on methods for cutting and bonding solar cells. Among these, the Infrared (IR) laser scribing technique has been extensively researched. However, there is still insufficient optimization research regarding the thermal damage caused by lasers on the Transparent Conductive Oxide (TCO) layer of Heterojunction (HJT) solar cells. Therefore, in this study, we systematically varied conditions such as IR laser scribing speed, frequency, power, and the number of scribes to investigate their impact on the performance of cut cells under each condition. Additionally, we conducted a comparative analysis of thermal damage effects on the TCO layer based on varying scribing depths.

• 소성∙가공
• /
• 제22권4호
• /
• pp.183-188
• /
• 2013

Scroll compressors are widely used in air conditioning systems and in automobiles due to their low pressure loss, minimal vibrations, and light-weight. Open-die forging with back pressure is used to forge the rotating scroll, and it requires special care since the forging die can be severely damaged at the fixed end of the spiral cavity similar to a fracture of a cantilever beam. To overcome the inevitable weakness of the forging die due to such damage, an innovative design is necessary. In this study, structural analysis using the finite element method was conducted to determine the reason for the fracture of the forging die. A novel design to avoid stress concentrations and vertical deflection, causing serious damage to the die, is suggested.

• International Journal of Human Ecology
• /
• 제10권1호
• /
• pp.23-33
• /
• 2009

This study identified the appropriateness of acceptance models of smart clothing and differences in the hypothesis of the path to clothing acceptance by classifying consumers depending on the level of technology innovation and fashion innovation through the extended TAM (Technology Acceptance Model) presented by Chae (2009). 815 copies of data were collected from adults over twenty living in major South Korean cities and analyzed them using a SPSS 15.0 and AMOS 5.0 package. Based on the average value of technology innovation and fashion innovation, the respondents were classified into: Group 1 with high technology innovation and fashion innovation, Group 2 with high technology innovation but low fashion innovation, Group 3 with low technology innovation but high fashion innovation, and Group 4 with low technology innovation and fashion innovation. The appropriateness of models for the four classified groups was verified. The analysis proved that an extended TAM for each classified group explains the acceptance process of smart clothing; especially the appropriateness of model of Group 1 and Group 4 was comparatively higher than other groups. Perceived usefulness was revealed as the key variable that affects consumer attitudes to accept smart clothing. Perceived ease of use has indirect positive effects on consumer attitudes passing through perceived usefulness and clothing involvement partly exerted impacts on consumer attitudes and the intention of acceptance. The mediating role of attitudes to explain the intention of the acceptance of smart clothing is high and suggests that it is necessary to take a positive role to help the consumer perceive the functional and useful aspects of the clothing.

• Animal Bioscience
• /
• 제37권4호
• /
• pp.640-654
• /
• 2024

Objective: The purpose of this study was to explore the effect of sodium salicylate (SS) on semen preservation and metabolic regulation in goats. Methods: Under the condition of low temperature, SS was added to goat semen diluent to detect goat sperm motility, plasma membrane, acrosome, antioxidant capacity, mitochondrial membrane potential (MMP) and metabonomics. Results: The results show that at the 8th day of low-temperature storage, the sperm motility of the 20 μM SS group was 66.64%, and the integrity rates of the plasma membrane and acrosome were both above 60%, significantly higher than those of the other groups. The activities of catalase and superoxide dismutase in the sperm of the 20 μM SS group were significantly higher than those of the control group, the contents of reactive oxygen species and malondialdehyde were significantly lower than those in the control group, the MMP was significantly higher than that in the control group, and the contents of Ca²⁺ and total cholesterol were significantly higher than those in the control group. Through metabonomics analysis, there were significant metabolic differences between the control group and the 20 μM SS group. Twenty of the most significant metabolic markers were screened, mainly involving five metabolic pathways, of which nicotinic acid and nicotinamide metabolic pathways were the most significant. Conclusion: The results indicate that SS can effectively improve the low-temperature preservation quality of goat sperm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권1호
• /
• pp.24-29
• /
• 2005

Silicon nitride cantilevers integrated with silicon heaters and piezoelectric sensors were developed for the scanning probe microscope (SPM) based data storage application. These nitride cantilevers are expected to have better mechanical stability and uniformity of initial bending than the previously developed silicon cantilevers. Data bits of 40 nm in diameter were recorded on PMMA film and the sensitivity of the piezoelectric sensor was 0.615 fC/nm, meaning that indentations less than 20 nm in depth can be detected. For high speed operation, $128{\times}128$ cantilever array was developed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권4호
• /
• pp.293-298
• /
• 2006

Thermopiezoelectric method, using poly silicon heater and a piezoelectric sensor, was proposed for writing and reading in a probe based data storage system. Resistively heated tip writes data bits while scanning over a polymer media and piezoelectric sensor reads data bits from the self-generated charges induced by the deflection of the cantilever. 34${\times}$34 array of thermopiezoelectric nitride cantilevers were fabricated by a single step wafer level transfer method. We analyzed the noise level of the charge amplifier and measured the noise signal. With the sensor and the charge amplifier 20mn of deflection could be detected at a frequency of 10KHz. Reading signal was obtained from the cantilever array and the sensitivity was calculated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1286-1288
• /
• 2002

본 연구에서는 차세대 교통체계인 첨단교통 시스템(ITS)에서 차량 운전자 및 도로이용자에게 도로 및 교통정보를 제공하기 위하여 설치 및 운영되고 있는 도로전광표지(Variable Message Sign : VMS)의 시인성을 분석하기 위하여, 가장 중요한 기초 변수인 휘도와 색도를 측정하였다. 측정치를 통하여 VMS의 휘도와 색도가 시인성을 판별할 수 있는 성능 인자로써 가능한지를 검토하고, 향후 VMS 시스템의 설치 및 관리 기술에 실무요령의 활용 여부를 검토한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.443-446
• /
• 2009

In this paper, an accurate ray-tracing based visual analysis method of lenticular 3D liquid liquid crystal display (LCDs) and some analysis results are presented. In the developed method, the geometric optics analysis is performed on the single 3D unit pixel of 3D lenticular LCD. It is shown that the display characteristics of 3D lenticular LCD panels of arbitrary size can be evaluated through the 3D unit pixel analysis. The analysis results of a few representative structures of 3D lenticular LCDs are compared.

• 대한치과기공학회지
• /
• 제41권1호
• /
• pp.1-7
• /
• 2019

Purpose: The objectives of this study was to evaluate clinical adaptation of dental prostheses printed by 3 dimensional(3D) printing technology. Methods: Ten study models were prepared. Ten specimens of experimental group were printed by 3D printing(3DP group). As a control group, 10 specimens were fabricated by casting method on the same models. Marginal gaps of all specimens were measured to evaluate clinical adaptation. Marginal adaptations were measured using silicone replica technique and measured at 8 sites per specimen. Wilcoxon's signed-ranks test was used for statistical analysis(${\alpha}=0.05$). Results: Means of marginal adaptations were $95.1{\mu}m$ for 3DP group and $75.9{\mu}m$ for CAST group(p < 0.000). Conclusion : However, the mean of the 3DP group was within the clinical tolerance suggested by the previous researchers. Based on this, dental prosthesis fabricated by 3D printing technology is considered to be clinically acceptable.