• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.3
• /
• pp.193-197
• /
• 2013

This paper presents a 5-bit true time delay circuit using a standard 0.18 ${\mu}m$ CMOS process for the broadband phased array antenna without the beam squint. The maximum time delay of ~106 ps with the delay step of ~3.3 ps is achieved at 5-20 GHz. The RMS group delay and amplitude errors are < 1 ps and <2 dB, respectively. The measured insertion loss is <27 dB and the input and output return losses are <12 dB at 5-15 GHz. The current consumption is nearly zero with 1.8 V supply. The chip size is $1.04{\times}0.85\;mm^2$ including pads.

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.19-26
• /
• 2018

One of the distinct features of Wireless Sensor Networks (WSNs) is duty cycling mechanism, which is used to conserve energy and extend the network lifetime. Large duty cycle interval introduces lower energy consumption, meanwhile longer end-to-end (E2E) delay. In this paper, we introduce an energy consumption minimization problem for duty-cycled WSNs. We have applied Q-learning algorithm to obtain the maximum duty cycle interval which supports various delay requirements and given Delay Success ratio (DSR) i.e. the required probability of packets arriving at the sink before given delay bound. Our approach only requires sink to compute Q-leaning which makes it practical to implement. Nodes in the different group have the different duty cycle interval in our proposed method and nodes don't need to know the information of the neighboring node. Performance metrics show that our proposed scheme outperforms existing algorithms in terms of energy efficiency while assuring the required delay bound and DSR.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.33-41
• /
• 2007

With the development of the multicast technology, the realtime strategy among the group applications using the multicast routing is getting more important. An essential factor of these real-time application is to optimize the Delay- and delay Variation-Bounded Multicast Tree(DVBMT) problem. This problem is to satisfy the minimum delay variation and the end-to-end delay within an upper bound. The DVBMT problem is known as NP-complete problem. The representative algorithms for the problem are DVMA, DDVCA, and so on. In this paper, we show that the proposed algorithm outperforms any other algorithm. The efficiency of our algorithm is verified through the prerformance evaluation and the enhancement is up to about 9% to 29% in terms of the multicast delay variation. The time complexity of our algorithm is $O(mn^2)$M.

• The Journal of Korean Academy of Sensory Integration
• /
• v.17 no.2
• /
• pp.18-30
• /
• 2019

Objective : The purpose of this study was to investigate the effect of Ayres's sensory integration (ASI) intervention on the sensory processing ability and motor development in children with Developmental Delay. Methods : 9 children in the experimental group and 8 children in the control group participated in this study for Developmental Delay children aged 3-5 years. For research tool, the Short Sensory Profile (SSP), Peabody Developmental Motor Scale-2 (PDMS-2) are used. In the experimental group, individual sensory integration therapy according to principle of ASI was performed for twice a week, 40 minutes, and 16 times for 8 weeks. Methods for the data analysis included Mann Whitney U test, Chi-square test, Wilcoxon's signed rank test, Cohen's d test of SPSS 24.0. Results : In the ASI Intervention group, the sensory processing ability showed statistically significant difference in total score, movement sensitivity, auditory filtering and low energy/weak compared to the control group without ASI intervention (p<.05). In the ASI Intervention group, the motor development showed statistically significant difference in Gross Motor Quotient, Fine Motor Quotient and Total Motor Quotient compared to the control group without ASI intervention (p<.05). Conclusions : In this study, ASI intervention had a positive effect on the sensory processing and motor development in children with Developmental Delay.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.165-176
• /
• 2015

Recently many Korean large-sized construction companies as well as specialty contractors have been expanding their business in the overseas market to mitigate impacts from long-term stagnation in the domestic market. Such as a result, it has been arisen as a major issue that contractors effectively manage the delays which have been commonly faced with in international mega-projects. Therefore it can be said that the ability of the delays management leads a success of project. This paper presents a review of literature for delay analysis methods such as time impact analysis(TIA) and raises practical problems to rationally substantiate the duration of extension of time(EoT) in international mega projects which have wide scope of works as well as complicated and detailed contract baseline programs by taking theoretical approaches. We suggest the two improvement concepts to substantiate the EoT claims which are effectively applicable to practical projects. The first is to sort out dominant delays among numerous delays in advance of applying a delay analysis. The second is to set up the delay sections with the advanced concept for analysing delays' effects by TIA. This study performed a case study on an actual international mega-project. to confirm the effectiveness of improvement concepts that this practical approach is applicable for the assessment of EoT. In conclusion, this paper supposes to provide practitioner in charge for an EoT claim with an advanced substantiation methodogy when they not only analyse the construction delays by using TIA, but also negotiate with stakeholders about with the assessment of EoT.

• Archives of Plastic Surgery
• /
• v.32 no.3
• /
• pp.327-334
• /
• 2005

This study was designed to investigate the effect of the surgical delay in the prefabricated cutaneous flap. Abdominal skin flaps (n=40), $4.5{\times}6.0cm$ in size, were created by the subcutaneous implantation of a saphenous vascular tissue in the male Sprague-Dawley rats. In the groups 1 and 2, the pedicle was skeletonized. In the groups 3 and 4, perivascular muscle cuff or gracilis fascia was retained, respectively. Six weeks later, each flap was elevated as an island flap and reposed in place. All flaps of the group 2 had a 72-hours of delay period. Five days after the flap repositioning, estimation of flap viability, microangiographies, and histological evaluation of vessel development were performed. The groups 2 and 3 showed higher viability in flap survival. The dilated choke vessels and fully developed vascular network were observed in the flap of the group 2, but not typically seen in the other groups. New vessels around the implanted pedicle were more developed in the group 2. Amount of the vessels in the mid-portion of the flap was significantly increased in the groups 2 and 4. In conclusion, the delay procedure enhanced the viability, and its effect was dependent on the new vessel formation around the implanted pedicle.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.51-60
• /
• 1997

A practically applicable collision free trajectory planning technique for tow robot systems is proposed. The robot trajectories considered in this work are composed of many segments, an at the intersection points between segments robots stop to assemble, weld, ordo other jobs by the attached a end-effectors. The proposed method is based on the Planning-Coordination Decomposition where planning is to find a trajectory of each robot independently according to their tasks and coordination is to find a velocity modification profile to avoid collision with each other. To fully utilize the independently planned trajectories and to ensure no geometrical path deviation after coordination, we develop a simple technique added the minimal delay time to avoid collision just before moving along path segments. We determine the least delay time by the graphical method in the Coordination space where collisions and coordinations are easily visualized. We classify all possible cases into 3 group and derive the optimal solution for each group.

• Current Optics and Photonics
• /
• v.3 no.5
• /
• pp.438-444
• /
• 2019

In this theoretical study, a line-defect photonic-crystal waveguide hosted in an annular photonic crystal was demonstrated to provide high-performance slow light with a wide band, low group-velocity dispersion, and a large normalized delay-bandwidth product. Combined with structural-parameter optimization and selective optofluid injection, the normalized delay-bandwidth product could be enhanced to a large value of 0.502 with a wide bandwidth of 58.4 nm in the optical-communication window, for a silicon-on-insulator structure. In addition, the group-velocity dispersion is on the order of $10^5$ ($ps^2/km$) in the slow-light region, which could be neglected while keeping the signal transmission unchanged.

• Journal of electromagnetic engineering and science
• /
• v.11 no.2
• /
• pp.76-82
• /
• 2011

In this paper, a novel design for a dual-band negative group delay circuit (NGDC) is proposed. Composite right/left-handed (CRLH) ${\lambda}/4$ short stubs are employed as a dual-band resonator. A CRLH ${\lambda}/4$ short stub is composed of a typical transmission line element as the right-handed component and a high-pass lumped element section as the left-handed component. It is possible to simultaneously obtain open impedances at two separate frequencies by the combination of distinctive phase responses of the right/left-handed components. Negative group delay (NGD) can be obtained at two frequencies by using dual-band characteristics of the CRLH stub. In order to achieve a bandwidth extension, the proposed structure consists of a two-stage dual-band NGDC with different center frequencies connected in a cascade. According to the experiment performed, with wide-band code division multiple access (WCDMA) and worldwide interoperability for microwave access (WiMAX), NGDs of $-3.0{\pm}0.4$ ns and $-3.1{\pm}0.5$ ns are obtained at 2.12~2.16 GHz and 3.46~3.54 GHz, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1032-1039
• /
• 2022

In this paper, we designed and implemented a cavity bandpass filter combined with a cross-coupling equalizer structure to enhance Group delay for 5G mobile network repeater, which can replace the SAW (Surface Acoustic Wave) type bandwidth filter used in the existing mobile communication system. Using the 3D EM simulation tool (HFSS), the resonance frequency, the coupling coefficient between resonators, and external quality coefficient between resonators were calculated. Based on this, a 12th bandpass filter was constructed to have attenuation characteristics of more than 20dB at the edge end of both sides of the band with a metal cavity structure with a frequency band of 3500MHz to 3600MHz and bandwidth of 97.85MHz. The designed bandpass filter satisfies the group delay time requirement for the 5G mobile communication standard and the in-band and out-band frequency responses.