• Geotechnical Engineering
• /
• v.3 no.4
• /
• pp.41-54
• /
• 1987

A stochastic numerical analysis for predicting the groundswater fluctuations in hillside slopes is performed in this paper to account for the uncertainties associated with the rainfall and site characteristics. The effect of spatial variabilities of aquifer parameters and the effect of temporal variability of recharge on the groundwater fluctuations are studied in depth. The Kriging is used to account for the spatial tariabilities of aquifer parameters. This technique prolevides the best linear unbiased estimator of a parameter and its minimum variance from a litsitem number of measured data. A stochastic one-dimensional numerical model is delreloped b) combining the groundwater flow model, the Kriging, and the first-order second-moment analysis. In addition, a two dimensional detelministic groundwater model is developed to study the change of ground water surfas in the transverse direction as well as in the downslope direction. It is revealed that the undulations of the impervious bedrock in addition to the permeability and the specific yield have an important influence on the fluctuations of the groundwater surface. It is also found that th'e groundwater changes significantly in the transverse direction as well as in the downslope direction. The results obtained in this analysis may be used for evaluation of landslide risks due to high porewater pressure.

• The Journal of Engineering Geology
• /
• v.29 no.1
• /
• pp.23-35
• /
• 2019

Landslides occur due to heavy rainfall in the summer season. Some of water may infiltrate into the ground; it causes a high saturation condition capable of causing a landslide. Soil properties are crucial in estimating slope stability and debris flow occurrence. The main study areas are Gwanaksan, Suraksan and Bukhansan (Mountain) in Seoul. A total of 44 soil samples were taken from the study area; and a series of geotechnical tests were performed. Physical and mechanical properties were obtained and compared based on region. As a result, among well-graded soils, they are classified as a clayey sand. Coarse-grained and fine-grained contents are approximately 95% and 5%, respectively, with very low amount of clay content. Density, liquid limit and dry unit weight are ranged in $2.62{\sim}2.67g/cm^3$, 27.93~38.15% and $1.092{\sim}1.814g/cm^3$. Cohesion and internal friction angle are 4 kPa and $35^{\circ}$ regardless of mountain area. Coefficient of permeability is varied between $3.07{\times}10^{-3}{\sim}4.61{\times}10^{-2}cm/sec$; it means that it results in great seepage. Permeability is inversely proportional to the uniformity coefficient and is proportional to the effective particle size. In the formal case, there was a difference by mountain area, while in the latter, the tendency was almost similar.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.1 no.1
• /
• pp.53-68
• /
• 1981

Most clays under sustained load exhibit time-dependent deformation because of creep movement of soil particles and many investigators have attempted to relate their findings to the creep behavior of natural ground and to the long-term stability of slopes. Since the creep behavior of clays may assume a variety of forms depending on such factors as soil plasticity, activity and water content, it is difficult and complicated to analyse the creep behavior of clays. Rheological models composed of linear springs in combination with linear or nonlinear dashpots and sliders, are generally used for the mathematical description of the time-dependent behavior of soils. Most rheological models, however, have been proposed to simulate the behavior of secondary compression for saturated clays and few definitive data exist that can evaluate the behavior of non-saturated clays under the action of sustained stress. The clays change gradually from a solid state through plastic state to a liquid state with increasing water content, therefore, the rheological models also change. On the other hand, creep is time-dependent, and also the effect of thixotropy is time-function. Consequently, there may be certain correlations between creep behavior and the effects of thixotropy in compacted clays. In addition, the states of clay depend on water content and hence the height of the specimen under drained conditions. Futhermore, based on present and past studies, because immediate elastic deformation occurs instantly after the pressure increment without time-delayed behavior, the factor representing immediate elastic deformations in the rheological model is necessary. The investigation described in this paper, based on rheological model, is designed to identify the immediate elastic deformations and the effects of thixotropy and height of clay specimens with varing water content and stress level on creep deformations. For these purposes, the uniaxial drain-type creep tests were performed. Test results and data for three compacted clays have shown that a linear top spring is needed to account for immediate elastic deformations in the rheological model, and at lower water content below the visco-plastic limit, the effects of thixotropy and height of clay specimens can be represented by the proposed rheological model not considering the effects. Therefore, the rheological model does not necessitate the other factors representing these effects. On the other hand, at water content higher than the visco-plastic limit, although the state behavior of clays is visco-plastic or viscous flow at the beginning of the test, the state behavior, in the case of the lower height sample, does not represent the same behavior during the process of the test, because of rapid drainage. In these cases, the rheological model does not coincide with the model in the case of the higher specimens.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.163-176
• /
• 2010

We report twenty data for early lavas erupted during the initial period of formation of Jeju Island on the basis of review on 539 data of whole-rock greochemistry and $^{40}Ar/^{39}Ar$ age dating out of mainly core samples from 69 boreholes drilled in the lower land since 2001 and 66 outcrop sites. Out of 69 boreholes, the early lava flow units are identified from samples collected from Beophocheon (EL 235 m, 210 m deep), Donnaeko (EL 240 m, 230 deep), Donghong-S (EL 187 m, 340 m deep), 05Donghong (EL. 187.6 m, 340 m deep), Dosoon (EL 305 m, 287 m deep), Sangye (EL 230 m, 260 m deep), Mureung-1 (EL 10.2 m, 160 m deep), and Gapa (EL 17.5 m, 92 m deep), which are located in the southern and southwestern portion of Jeju Island. While, the well-known outcrops from Sanbangsan, Wolrabong, Wonmansa, and Kagsubawi are also reconfirmed. $^{40}Ar/^{39}Ar$ age dating results of these lavas range from 1 Ma to 0.7 Ma, indicating that the data can be useful to constrain on age and geochemical characteristics of early lava effusion period in the formation of Jeju Island. Especially, samples with trachybasalt in composition collected from 143 m to 137 m, and from 135 m to 123 m below ground surface at 05Donghong hole have the oldest ages, $992\pm21$ Ka and $988\pm38$ Ka, respectively. This study suggests that in Jeju Island the first lava with trachybasalt in composition may have effused around 1 Ma ago, and the effusion style and chemical compositions of lavas must have changed to the formation of lava domes with trachyte-trachyandesite-basaltic trachyandesite and the eruption of lavas with alkali basalt and trachybasalt intermittently during the period from 0.9 Ma to 0.7 Ma ago. It also indicates that the initial lava flows below the ground are intercalated with or underlain by the Seoguipo Formation except for several exposed domal structure areas such as Sanbangsan and Kagsubawi, implying that the early lava effusion may have intermittently and sporadically occurred with nearby hydrovolcanism and sedimentation.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.105-120
• /
• 2011

A moat is a pond or waterway paved on the outside of a fortress that is one of the facilities to prevent enemy from approaching the fortress wall or classify it as the boundary space, moats had existed in Europe, Asia and the America from ancient times to medieval times. however it is has been disappeared in modem society. In addition, a moat is a great value in historical and cultural sense such as offering a variety of cultural activities and habitats for animals, but unfortunately there is little consideration of its restoration plan. This research is aimed to investigate historical and cultural meaning and significance of moats which had been existing from ancient times to medieval times in the Eastern and Western. For this purpose, this research analyzed concepts and functions in consideration with times and ideological backgrounds of moats in Korea, China, and Japan. Results were as follows: 1. Moats in Korea existed not only in the castle towns of Goguryeo but also in ancient castle towns of Baekje and Silla. Natural moats and artificial moats existed around castles that were built to prevent and disconnect accessibility of enemies In Goryeo Dynasty and Chosun Dynasty, moats were also used as a defensive function. 2. A moat was generally installed by digging in the ground deep and wide at regular intervals from the ramparts, A moat was installed not only around a castle but also in its interiors. Moats outside castles played an important role in stomping the ground hard besides enhancing its defensive power. In addition, water bodies around a facility often discouraged people's access and walls or fences segregated space physically, but a moat with its open space had an alert and defensive means while pertaining its visual characteristics. 3. The moat found at Nagan Eupseong rumor has it that a village officials' strength was extremely tough due to strong energy of the blue dragon[Dongcheon] in Pungsujiri aspects, so such worries could be eliminated by letting the stream of the blue dragon flow in the form of 'S'. 4. The rampart of the Forbidden City of China is 7.9 meters high, and 3,428 meters long in circumference. It was built with 15 layers of bricks which were tamped down after being mixed with glutinous rice and earth, so it is really solid. The moat of the Forbidden City is 52 meters in width and 6 meters in depth, which surrounds the rampart of the Forbidden City, possibly blocking off enemies' approach. 5. Japan moats functioned as waterways due to their location in cities, further, with the arrangement of leisure facilities nearby, such as boating, fishing from boats, and restaurants, it helped relieve city dwellers' stress and functions as a lively city space. 6. Korean moats are smaller in scale than those of the Forbidden City of China, and Edo, and Osaka castles in Japan, Moats were mostly installed to protect royal palaces or castles in the Eastern Asia whereas moats were installed to protect kings, lords, or properties of wealthy people in the west.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.29-46
• /
• 2004

It is important to identify geometries of fracture that act as a conduit of fluid flow for characterization of ground water flow in fractured rock. Fracture geometries control hydraulic conductivity and stream lines in a rock mass. However, we have difficulties to acquire whole geometric data of fractures in a field scale because of discontinuous distribution of outcrops and impossibility of continuous collecting of subsurface data. Therefore, it is needed to develop a method to describe whole feature of a target fracture geometry. This study suggests a new approach to develop a method to characterize on the whole feature of a target fracture geometry based on the Fourier transform. After sampling of specimens along a target fracture from borehole cores, effective frequencies among roughness components were selected by the Fourier transform on each specimen. Then, the selected effective frequencies were averaged on each frequency. Because the averaged spectrum includes all the frequency profiles of each specimen, it shows the representative components of the fracture roughness of the target fracture. The inverse Fourier transform is conducted to reconstruct an averaged whole roughness feature after low pass filtering. The reconstructed roughness feature also shows the representative roughness of the target subsurface fracture including the geometrical characteristics of each specimen. It also means that overall roughness feature by scaling up of a fracture. In order to identify the characteristics of permeability coefficients along the target fracture, fracture models were constructed based on the reconstructed roughness feature. The computation of permeability coefficient was performed by the homogenization analysis that can calculate accurate permeability coefficients with full consideration of fracture geometry. The results show a range between $10^{-4}{\;}and{\;}10^{-3}{\;}cm/sec$, indicating reasonable values of permeability coefficient along a large fracture. This approach will be effectively applied to the analysis of permeability characteristics along a large fracture as well as identification of the whole feature of a fracture in a field scale.

• Journal of the Korean Geographical Society
• /
• v.31 no.2
• /
• pp.138-159
• /
• 1996

There has been a tendency for Geomorphology and Climatology to be dominant in Physical Geography for 50 years in Korea. Physical Geography is concerned with the study of the totality of natural environment through the integrated approaches. But, an overall direction or a certain paradigm could not be found, because major sub-divisions of Physical Geography have been studied individually and the subjects and the approaches in studying Physical Geography are enormously diverse. A consensus of opinion could not also exist in deciding what kind of the sub-divisions should be included in the physical geography in general and how those should be summarized. Furthermore it would be considered imprudent to survey the studies of Physical Geography besides those of Geomorphology and Climatology due to the small number of researchers. Assuming that the rest of Physical Geographical studies with the exception of Geomorphological and Climatological studies are the Physical Geography in general, the studies of Physical Geogrpahy in general are summarized and several aspects are drown out as follows. First the descliption of all possible factors of natural environments was the pattern of early studies of Physical Geography and the tendency is maintained in the various kinds of research and project reports. Recently Physical Geographers have published several introductory textbooks or research monographs. In those books, however, the integrated approaches to Physical Geography were not suggested and the relationship between man and nature are dealt with in the elementary level. Second, the authentic soil studies of Physical Geographers are insignificant, because the studies of soil in Physical Geography have been mostly considered as the subsidiary means of Geomorphology Summarizing the studies of Soil Gegraphy by physical geographers and other Pedologists, the subjects are classified as soil-forming processes, soil erosions, soil in the tidal flat and reclaimed land, and soil pollution. Physical Geographers have focused upon the soil-forming processes in order to elucidate the geomorphic processes and the past climatic environment. The results of other subjects are trifling. Thirdy Byogeygrayhers and the results of studies are extremely of small number and the studies of Biogeography in Korea lines in the starting point. But, Biogeography could be a more unifying theme for the Physical-human Geography interface, and it would be expected to play an active part in the field of environmental conservation and resource management. Forth, the studies of Hydrogeography (Geographical Hydrology) in Korea have run through the studies of water balance and the morphometric studies such as the drainage network analysis and the relations of various kinds of morphometric elements in river. Recently, the hydrological model have introduced and developed to predict the flow of sediment, discharge, and ground water. The growth of groundwater studies is worthy of close attention. Finally, the studies on environmental problems was no mole than the general description about environmental destruction, resource development, environmental conservation, etc. until 1970s. The ecological perspectives on the relationship between man and nature were suggested in some studies of natural hazard. The new environmentalism having been introduced since 1980s. Human geographers have lead the studies of Environmental Perception. Environmental Ethics, Environmental Sociology, environmental policy. The Physical geographers have stay out of phase with the climate of the time and concentrate upon the publication of introductory textbooks. Recently, several studies on the human interference and modification of natural environments have been made an attempt in the fields of Geomorphology and climatology. Summarizing the studies of Physical Geography for 50 years in Korea, the integrated approaches inherent in Physical Geography disappeared little by little and the majol sub-divisions of Physical Ceography have develop in connection with the nearby earth sciences such as Geology, Meteorology, Pedology, Biology, Hydrology, etc been rediscovered by non-geographers under the guise of environmental science. It is expected that Physical Geography would revive as the dominant subject to cope with environmental problems, rearming with the innate integrated approaches.

• Journal of Environmental Impact Assessment
• /
• v.30 no.1
• /
• pp.35-48
• /
• 2021

In this study, the assessment of field applicability of in-situ remediation of nitrate-contaminated groundwater located in Yesan-gun was performed. Zero-valent iron/bio composite media injected PRB (Permeable Reactive Barrier) and monitoring well were installed in the contaminated groundwater site and monitored main remediation indicators during the PRB operation. Nitrate, nitrite, ammonia, Fe ion, TOC, and turbidity were analyzed and the diversity and population of microorganism in the PRB installed site were investigated for the verification of effect of injected PRB. In the study site where is an agricultural area, a river flows from west to east that forms a river boundary and the southern area has an impermeable sector. It was found that nitrate flows into the river, which is similar as groundwater flow. Simulation result for the fate of nitrate in groundwater showed steady state of nitrate arrived after 3~5 years passed. However, it is just to consider current conditions with no additional input of contaminant source, if additional input of contaminant source occurs contamination dispersion and time for steady state are expected to be increased. The monitoring results showed that Fe ion, TOC and turbidity in groundwater were not clearly changed in concentration after PRB installation, which indicates adaptability of the injected PRB for remediation of groundwater with no additional harmful effect to water quality. The concentration of nitrate maintained less than 5mg/L until 42 days after PRB installation and recovered its initial concentration after 84 days passed and showed termination of reactivity of injected zero-valent iron/bio composite media for removal nitrate. Nitrite and ammonia ions found after installation of PRB indicates reductive removal of nitrate. And the outstanding increase of microorganism diversity and population of Betaproteobacteria Class which includes denitrification microorganism explains biologically reductive removal of nitrate in injected PRB.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.215-235
• /
• 1996

The thermal analysis by mathematical model simulation makes it possible to reasonably predict heating and/or cooling requirements of certain greenhouses located under various geographical and climatic environment. It is another advantages of model simulation technique to be able to make it possible to select appropriate heating system, to set up energy utilization strategy, to schedule seasonal crop pattern, as well as to determine new greenhouse ranges. In this study, the control pattern for greenhouse microclimate is categorized as cooling and heating. Dynamic model was adopted to simulate heating requirements and/or energy conservation effectiveness such as energy saving by night-time thermal curtain, estimation of Heating Degree-Hours(HDH), long time prediction of greenhouse thermal behavior, etc. On the other hand, the cooling effects of ventilation, shading, and pad ||||&|||| fan system were partly analyzed by static model. By the experimental work with small size model greenhouse of 1.2m$\times$2.4m, it was found that cooling the greenhouse by spraying cold water directly on greenhouse cover surface or by recirculating cold water through heat exchangers would be effective in greenhouse summer cooling. The mathematical model developed for greenhouse model simulation is highly applicable because it can reflects various climatic factors like temperature, humidity, beam and diffuse solar radiation, wind velocity, etc. This model was closely verified by various weather data obtained through long period greenhouse experiment. Most of the materials relating with greenhouse heating or cooling components were obtained from model greenhouse simulated mathematically by using typical year(1987) data of Jinju Gyeongnam. But some of the materials relating with greenhouse cooling was obtained by performing model experiments which include analyzing cooling effect of water sprayed directly on greenhouse roof surface. The results are summarized as follows : 1. The heating requirements of model greenhouse were highly related with the minimum temperature set for given greenhouse. The setting temperature at night-time is much more influential on heating energy requirement than that at day-time. Therefore It is highly recommended that night- time setting temperature should be carefully determined and controlled. 2. The HDH data obtained by conventional method were estimated on the basis of considerably long term average weather temperature together with the standard base temperature(usually 18.3$^{\circ}C$). This kind of data can merely be used as a relative comparison criteria about heating load, but is not applicable in the calculation of greenhouse heating requirements because of the limited consideration of climatic factors and inappropriate base temperature. By comparing the HDM data with the results of simulation, it is found that the heating system design by HDH data will probably overshoot the actual heating requirement. 3. The energy saving effect of night-time thermal curtain as well as estimated heating requirement is found to be sensitively related with weather condition: Thermal curtain adopted for simulation showed high effectiveness in energy saving which amounts to more than 50% of annual heating requirement. 4. The ventilation performances doting warm seasons are mainly influenced by air exchange rate even though there are some variations depending on greenhouse structural difference, weather and cropping conditions. For air exchanges above 1 volume per minute, the reduction rate of temperature rise on both types of considered greenhouse becomes modest with the additional increase of ventilation capacity. Therefore the desirable ventilation capacity is assumed to be 1 air change per minute, which is the recommended ventilation rate in common greenhouse. 5. In glass covered greenhouse with full production, under clear weather of 50% RH, and continuous 1 air change per minute, the temperature drop in 50% shaded greenhouse and pad ＆ fan systemed greenhouse is 2.6$^{\circ}C$ and.6.1$^{\circ}C$ respectively. The temperature in control greenhouse under continuous air change at this time was 36.6$^{\circ}C$ which was 5.3$^{\circ}C$ above ambient temperature. As a result the greenhouse temperature can be maintained 3$^{\circ}C$ below ambient temperature. But when RH is 80%, it was impossible to drop greenhouse temperature below ambient temperature because possible temperature reduction by pad ||||&|||| fan system at this time is not more than 2.4$^{\circ}C$. 6. During 3 months of hot summer season if the greenhouse is assumed to be cooled only when greenhouse temperature rise above 27$^{\circ}C$, the relationship between RH of ambient air and greenhouse temperature drop($\Delta$T) was formulated as follows : $\Delta$T= -0.077RH＋7.7 7. Time dependent cooling effects performed by operation of each or combination of ventilation, 50% shading, pad ＆ fan of 80% efficiency, were continuously predicted for one typical summer day long. When the greenhouse was cooled only by 1 air change per minute, greenhouse air temperature was 5$^{\circ}C$ above outdoor temperature. Either method alone can not drop greenhouse air temperature below outdoor temperature even under the fully cropped situations. But when both systems were operated together, greenhouse air temperature can be controlled to about 2.0-2.3$^{\circ}C$ below ambient temperature. 8. When the cool water of 6.5-8.5$^{\circ}C$ was sprayed on greenhouse roof surface with the water flow rate of 1.3 liter/min per unit greenhouse floor area, greenhouse air temperature could be dropped down to 16.5-18.$0^{\circ}C$, whlch is about 1$0^{\circ}C$ below the ambient temperature of 26.5-28.$0^{\circ}C$ at that time. The most important thing in cooling greenhouse air effectively with water spray may be obtaining plenty of cool water source like ground water itself or cold water produced by heat-pump. Future work is focused on not only analyzing the feasibility of heat pump operation but also finding the relationships between greenhouse air temperature(T$_{g}$ ), spraying water temperature(T$_{w}$ ), water flow rate(Q), and ambient temperature(T$_{o}$).

• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.112-129
• /
• 2011

This paper was written to understand, through the types and production techniques, how cooking vessels of Baekje Hanseong period had evolved, - the cooking vessels that were excavated from the historic sites of Baekje Hanseong Period such as Mongchontoseong and Pungnaptoseong of Seoul, the ancient tomb group of Seokchon-dong, and Misari historic site of Hanam. First, the results produced through the analysis of types of these cooking vessels are as followings: as for deep bowls, the maximum body diameter is found on the top of pottery, while as for an egg-shaped pottery, the maximum body diameter is found on the middle height of pottery. However, as for the rim diameter ratio to the neck diameter ratio of pottery, the said two typed potteries were shown to have smaller ones. In consideration of each historic site, as for deep bowls, the ancient tomb group of Seokchon-dong had potteries that had less volumes, were deeper, and had higher maximum body diameters. When it comes to an egg-shaped pottery, Pungnaptoseong had the potteries that were deeper than those of Misari historic site, and their potteries also had the maximum body diameter found on the middle height of pottery, and larger rim diameter ratio to the neck diameter of the pottery. The results produced though the analysis of the production techniques of these cooking vessels are as followings: in the case of deep bowls, as the width of a volume category gets larger, the pottery stamping with an anvil including patterns was more frequently used for pottery production. In this case, simultaneously braid patterns were frequently found on the outer sides of these potteries. In addition, it was found the basal walls of these potteries were thinnest in all typed potteries. This shows there occurred technique transitions according to the time flow. When it comes to an egg-shaped pottery as well, the pottery produced by using an anvil had the thinnest basal wall and its rim diameter ratio to its neck diameter ratio was smaller. Also around the mouth of this pottery, traces were found on its front, the traces formed by the strong rotating power. It is determined these two typed potteries were all produced by using an anvil to have thinner walls. Then, how these potteries were used? In the case of deep bowls, liquid food was put on a hearth or ground to be cooked whereas in the case of an egg-shaped pottery, the pottery was put on a puttumak(kitchen stove) mainly for boiling water. The deep bowls and egg-shaped potteries excavated from the center areas of Baekje Hanseong Period were not clearly determined about when their pastes or firing times were, but as for their production techniques, it was possible to check how they had developed. Moreover, it was determined that in the changing aspects of their production techniques, temporalite is also reflected.