• 품질경영학회지
• /
• 제46권1호
• /
• pp.169-188
• /
• 2018

Purpose: The purpose of this study is to analyze low-temperature starting performance of the light attacker and to search and improve the aircraft system including battery and Battery Charge and Control Unit(BCCU). Methods: In order to improve the starting up performance of the light attacker at low-temp, various deficiency cause were derived and analyzed using Fault Tree Analysis method. As a result, it was confirmed there were drawbacks in the charging and discharging mechanism of the battery. The inactivation of the battery's electrolyte at low-temp and the premature termination of the battery charge were the main cause. After long error and trial, we improved these problems by improving performance of battery and optimizing the charging algorithm of BCCU. Results: It was confirmed that the problems of starting up failures were solved through the combined performance test of the battery and BCCU, the ground test using the aircraft system and the operation test conducted by Korea Airforce operating unit for 3 months in winter. Conclusion: This study showed that the improvement of quality reliability was achieved and thus the start-up performance issue of the light attacker has been resolved at low temperature. And it is expected that the design methodologies of temperature-affected electrical system of aircraft will contribute to the development of the aircraft industry in the future.

• International Journal of Control, Automation, and Systems
• /
• 제6권4호
• /
• pp.534-543
• /
• 2008

To use the Global Positioning System (GPS) carrier phase measurement for precise positioning, the integer ambiguities at the early stage of most algorithms must be determined. Furthermore, if a precise positioning is to be applied to real time navigation, fast determination and validation methods for integer ambiguity are essential. In this paper, the Wald test that simultaneously determines and validates integer ambiguities is used with assistance of the Inertial Navigation System (INS) to improve its performance. As the Wald test proceeds, it assigns a higher probability to the candidate that is considered to be true at each time step. The INS information is added during the Wald test process. Large performance improvements were achieved in convergence time as well as in requiring fewer observable GPS satellites. To test the performance improvement of the Wald test with the INS information, experimental tests were conducted using a ground vehicle. The vehicle moved in a prescribed trajectory and observed seven GPS satellites. To verify the effect of the INS information on the Wald test, the convergence times were compared with cases that considered the INS information and cases that did not consider the INS information. The results show that the benefits of using the INS were emphasized as fewer GPS satellites were observable. The performance improvement obtained by the proposed algorithm was shown through the fast convergence to the true hypothesis when using the INS measurements.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2173-2178
• /
• 2008

Railroad is the major factor of vibration source in railway vehicles, and it must carefully maintained the original condition to secure the safety and good ride comfort of passenger. Measuring the condition of rail irregularities such as surface, alignment, gauge, twist and cant etc is required to maintain the good performance of railroad. Currently, the various rail irregularity measurement systems(EM120, ROGER1000K and the Total Rail Irregularity Measurement system of Korea High Speed Train) are operated in Korea to estimate the rail irregularity. It is hard to verify the correlation of one rail irregularity data of a measurement system with the other, because they have been adopted different rail irregularity estimation methods. The best method securing the reliability of the irregularity data is the direct confirmation on the ground where the measurement system had detected as a fault section, but it is impossible to apply all sections simultaneously due to limitation of time, labor, cost and equipments. There is a method to secure the reliability of the data by using acceleration values. Rail irregularities, the major factor of vibration in railway vehicle, are transmitted to the vehicle acceleration through masses, springs, dampers and joints as the system dynamic formation. In this study, Transition Function has been adopted by using the rail irregularity and the acceleration value regarding as input & output parameters respectively. It has been verified by comparing the analyzed results with real measured irregularity data from the Total Rail Irregularity Measurement system of Korea High Speed Train. Also various methods has been accomplished to verify the correlation between rail irregularities and acceleration values.

• 한국지역지리학회지
• /
• 제22권1호
• /
• pp.225-239
• /
• 2016

적중 초계분지는 분지 내에서 발원하는 소하천을 합류한 산내천이 북류하여 분지를 빠져나가는 출구를 제외하면 분수계로 둘러싸여 완전한 분지 형태를 취한다. 퇴적암이 혼펠스화된 남서, 남, 남동쪽 분수계의 산지는 높고 북쪽은 구릉지이다. 이들 사이의 분지저에는 선상지와 범람원이 형성되었다. 분수계 해발고도와 유역분지 규모에 비례하여 큰 하천들이 발원하는 남쪽 분수계 전면의 선상지는 규모가 크지만, 서쪽과 동쪽으로 갈수록 작아진다. 분지의 북쪽에 분포하는 범람원은 대부분 황강의 홍수퇴적물로 덮여있다. 적중 초계분지는 기반암의 차별침식이나 운석충돌보다 지반운동에 의한 지질구조선이나 단층선을 따라 기반암이 풍화되면서 분지가 형성되었을 가능성이 높다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.992-1006
• /
• 2008

The tunnel type spillways is under construction to increasing water reservoir capacity in Dae-am dam. Cutting-slope adjacent to outlet of spillways had been originally designed to be 63 degrees and about 65m in height. Examination is carried out in preceding construction that it is caused to some problems possibility which of machine for slope cutting couldn't approach to the site, blasting for cutting slope might have negative influence on highway and roads nearby, and fine view along the Tae-hwa river would be eliminated. In order to establish stability of tunnel and more friendly natural environment that we are carry out detailed geological surface survey and analysis of slope stability. So, we are design and construct for tunnel excavation with possible method that it is keep up natural slope. The result of survey and analysis that natural slope was divided 3 zone(A, B, C zone). In A and B zone, in first removed floating rock, high tensile tension net is install that it prevent of release and falling of rock, in order to security during under working. In addition to, pre-stressed rock anchor is install purpose of security during tunnel excavation because of fault zone near vertical developed above excavation level. Zone C is relatively good condition of ground, design is only carry out random rock bolt. All zone are designed and constructed drainage hole for groundwater and surface water is easily drain. Desinged slpoe is harmony with near natural environment. Successfully, construction is completed.

• 한국산업정보학회논문지
• /
• 제9권1호
• /
• pp.92-102
• /
• 2004

자기 주도적 학습능력의 수준별 교육을 위한 평가 방법으로서, 수행평가는 문제해결 능력과 높은 사고 능력평가에 대한 한계점을 극복하고 수업의 질과 학교 정상화를 위한 계획으로 선호되고 있다. 그러나 수행평가는 평가 오류, 채점 공정성 문제, 신뢰도 및 객관성 등의 확보에 어려움 있다. 이런 문제점을 해결하고 수행평가 만족을 높이기 위하여, 본 논문에서는 회계원리 과목을 대상으로 수행평가에 대한 각 영역에서 영향을 주는 인자를 분석하여 퍼지 소속 함수를 설계하고, 이를 적용한 객관적이고 신뢰성 높은 수행평가 방법을 제시하고자 한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.37-42
• /
• 2005

해상에서 항법시스템의 고장이나 중단에도 불구하고 연속적인 항법 서비스의 제공이 가능하도록 하는 Fail-Safe Seaway 방안이 필요하다. 모든 위성 및 지상전파항법의 통합전파항법기술을 위해 본 논문에서는 소프트웨어 라디오 기술을 이용한 수신기 특히, GPS 수신기의 신호처리 알고리즘 설계에 초점을 맞춘다. 현재 소프트웨어 GPS 수신기의 가장 큰 문제점은 실시간 구현의 어려움에 있다. GPS 신호와 같이 넓은 대역폭을 갖는 신호를 다중 상관기로 구현하는데 있어서, 상용 프로세서에서는 많은 연산량이 요구되어 실시간 구현이 어렵기 때문이다 본 논문은 실시간 구현 시에 요구되는 많은 연산량을 해결하기 위해 소프트웨어 GPS 수신기 내부에서 생성하는 다중비트의 반송파 및 코드를 일정한 패턴으로 간소화시켜 연산량을 크게 감소시키는 방법을 제안한다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권12호
• /
• pp.562-567
• /
• 2003

Lightning arresters are deteriorated by repetition of protective operation against overvoltages or impulse currents in environments of its use. If a deteriorated arrester is left in power lines, it can lead to an accident such as a line to ground fault even in a normal system. Therefore, it is necessary to eliminate the deteriorated arrester in advance by checking the soundness of arresters on a regular basis, and to ensure the reliability of power systems by preventing accidents. Various deterioration diagnostic techniques and devices are suggested, and most of which measure leakage current components as an indicator of arrester ageing. However, the techniques based on the magnitude of leakage current measure simply RMS or peak value of leakage current components and do not provide detailed information needed in the diagnosis. In this study, we found that the wave height distributions of the total leakage currents are remarkably changed or a new wave height are produced with the progress of arrester deterioration. To propose a new technique for the diagnosis, we designed a leakage current detection unit and an analysis program which can measure leakage current magnitudes and analyze wave height distributions. From the experimental results, we confirmed that the proposed technique by analyzing the wave height distribution can simply diagnose the mode of defects such as a partial damage and an existence of punctures in arresters as well as deterioration of arresters.

• 지질공학
• /
• 제1권1호
• /
• pp.121-136
• /
• 1991

본 연구에서는 P파형의 초동극성 분포를 이용하여 홍성지진의 Focal Mechanism을 평가하였다. 비선형 전산처리과정을 이용하여 원지진진앙거리에서 관측된 9개의 P파형의 초동극성 분포와 주향, 경사 및 상반변위방향의 변화로부터 구한 Focal Mechanism과의 부합성을 조사하였다. 위의 과정을 이용하여 처리한 결과 주단층면의 주향 및 겅사는 약 247도 및 약 78도로서 홍성부근지역의 선구조와 잘 일치함을 보여주었다. 그러나, 주단층면의 상반변위 방향은 약 40도에서 약 160도 까지의 광범위한 값을 보여주었으나, 이는 관측점의 방위각 분포가 불충분하기 때문인 것으로 분석되었다. 위에서 결정된 Focal Mechanism이 의미하는 주응력 방향은 일본 트렌치를 따라서 태평양판이 유라시아판 아래로 Subduction할 때 가능한 지응력장가 상반되지 않음을 보여 주었다. 또한, 이러한 Focal Mechanism으로부터 원자력발전소나 핵폐기물 처리장 및 처분장 건설시, 부지고유응답 스펙트럼 및 강지진동 자료와 같은 내진설계기준을 위해 필요한 한반도의 지진지체구조 특성에 대한 정보를 얻을 수 있다.

• 조명전기설비학회논문지
• /
• 제16권6호
• /
• pp.22-29
• /
• 2002

무방향성 규소강판을 사용한 자기식 네온관용 변압기는 내구성이 좋은 반면에 용량에 따른 규소 강판의 무게가 무겁고 외형이 큰 관계로 네온관 설치 작업 시 상당히 불편한 점이 많다. 또한 네온관의 다양한 디스플레이 제어성면에서도 비합리적 이었다. 이를 개선하기 위한 방법으로 네온 트랜스포머의 전원장치 및 2차측 고압 출력부를 고속의 고주파 스위칭 파워 트랜지스터(MOSFET)를 이용하여 상용주파수 60［Hz］를 고속 스위칭 제어를 통하여 20［KHz］의 고주파로 변환시킨후, 네온관을 방전시키기 위한 고전압을 발생시키는 인버터식 네온관용 변압기를 구현하였다. 또한 네온관의 파손이나 누전으로 인한 화재나 인체 감전의 위험을 사전에 방지할 수 있는 보호회로 GFCI(Ground Fault Circuit Interrupter)를 제안 하였다.