• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.425-428
• /
• 2005

To resolve land demand by the development of various industries and the cityward tendency of population, the construction of ultra-soft ground that is unused in the past has been progressing with activity. The ultra-soft ground has very small shear strength and large deformation, so leads to many problems in ground improvement in construction. In order to dispose of these problems, it is necessary to develope the chemical materials that can be applied to the surface stabilization of ultra-soft ground. In this study, the new ground treatment that is using cement and SCS is compared, analyzed with existing ground treatment. In addition, through the laboratory tests that check the characteristic of congealment and strength, the application of SCS in field is affirmed.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 봄 학술발표회 논문집
• /
• pp.118-125
• /
• 1992

The ground deformation due to the tunnel excavation is dependent on various factors such as ground condition, geometry of the tunnel, excavation method, installation of support members, construction condition of each excavation stage, etc. And the distance from the facing effects significantly the stress conditions of the supported and unsupported ground due to the 3-dimensional structural nature of the excavated tunnel. The concept of ground characteristic line has been applied to properly consider the loading condition given by staged tunnel excavation so that the imaginary supporting pressure is applied against the surface of excavated ground. Discussions on the results of the performed finite element analysis were mainly made with respect to the ground settlement, tunnel displacement, earth pressure, stress mobilized in supporting members.

• 한국지반공학회논문집
• /
• 제35권5호
• /
• pp.21-30
• /
• 2019

얕은 터널에 대한 연구는 종방향 하중전이와 수평지반에 대한 연구가 주를 이루었으며 사면 하부에 위치한 얕은 터널 주변지반의 거동연구는 미흡한 실정이다. 따라서 본 연구에서는 사면 하부에 위치한 터널의 종방향 굴진에 따른 터널 주변지반의 거동을 규명하기 위해 변위제어방식으로 모형시험을 실시하였다. 모형터널은 폭 320mm, 높이 210mm, 길이 55mm 규격의 강성이 큰 알루미늄 강체로 제작하였고, 모형지반은 3가지 규격의 탄소봉을 혼합하여 균질한 모형지반을 조성하였다. 모형시험은 사면 경사와 토피고를 변수로 측벽변형을 발생시키는 변위제어방식으로 실시하였으며, 터널 벽체의 하중변화, 터널 주변지반의 하중전이와 지표침하 변화를 측정하고 분석하였다. 지표침하의 변화는 경사가 증가할수록 수평지반보다 20~39%의 증가가 나타났다. 터널 천단부 및 측벽부의 하중 변화는 사면 경사가 증가할수록 천단부는 최대 20%가 증가하고, 측벽부는 사면 경사의 영향으로 하중비가 감소하는 것을 확인하였다. 연직하중은 토피고가 1.0D 이하에서는 최대 128%의 하중증가가 나타났지만, 토피고가 1.5D 이상에서는 수평지반과 큰 차이가 나타나지 않았다. 이것으로 사면 경사는 토피고 1.0D에서 가장 큰 영향이 나타나는 것을 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.49-52
• /
• 2008

New Orleans located in the estuary of the Mississippi River was attacked by Hurricane Katrina and suffered big flood on August 2005. Since unconsolidated Holocene to middle Miocene strata is the main basement rocks, land subsidence has been occurred steadily due to soil compaction and normal faulting. It was reported that the maximum subsidence rate from 2002 to 2005 was -29 mm/yr. Many studies in the area have been carried out for understanding the subsiding and potential risks caused by ground subsidence are weighted by the fact that a large area of the city is located below the mean sea level. A small baseline subset (SBAS) method is applied for effectively measuring time-series LOS (Line-of sight) surface deformation from differential synthetic aperture radar interferograms in this study. The time-series surface deformation at New Orleans was measured from RADARSAT-1 SAR images. The used dataset consists of twenty-one RADARSAT-1 fine beam mode images on descending orbits from February 2005 to February 2007 and another twenty-one RADARSAT-1 standard beam mode images on ascending orbits from January 2005 to February 2007. From this dataset, 25 and 38 differential interferograms on descending and ascending orbits were constructed, respectively. The vertical and horizontal components of surface deformation were extracted from ascending and descending LOS surface deformations. The result from vertical component of surface deformation indicates that subsidence is not significant with a mean rate of -3.1${\pm}$3.2 mm/yr.

• 한국지반공학회논문집
• /
• 제23권9호
• /
• pp.17-28
• /
• 2007

도심지 지하 터널은 주변 구조물의 존재 하에서 미고결성 저토피고 지반에 건설되는 경우가 많기 때문에 일반 산악 터널이나 대심도 암반층에 건설되는 지하공동과는 달리 터널 주변의 지반 변위, 지표면 침하와 기울기가 터널 설계의 주요인자가 된다. 본 논문은 도심지 NATM 터널의 변형거동에 대한 합리적 해석 방법의 확립을 위한 연구로서 변형률 연화 모델을 이용한 수치해석적인 방법을 통하여 굴착에 따른 지반 평가와 거동 예측을 수행하였다. 적용되어진 변형률 연화모델은 지반이 항복후 전단변형률의 증가에 따른 전단강성와 강도정수의 저하를 고려한 것이다. 현장 계측 결과는 시공중 설계물성치의 재설정에 이용되어졌다. 연화모델의 결과와 현장 계측값과의 비교에서 적용되어진 모델이 지표 침하, 기울기, 지중 침하 및 지중 수평변위의 변형 양상을 어느 정도 재현될 수 있음을 알 수 있었다. 본 논문에서 제안된 모델을 토대로 시공조건이 엄밀한 도심지 터널의 변형거동에 정량적인 평가 및 예측이 가능할 것으로 기대된다.

• 한국해양공학회지
• /
• 제15권4호
• /
• pp.86-91
• /
• 2001

In lateral ground flow, slope stability, and land slide problems, H-piles have been often used for a horizontally deforming ground to prevent the failure of mass of soil in a downward and outward movement of a slope. Here, Theoretical equations are derived to estimate the lateral force, assuming that the Mohr-coulomb's Plastic states occures in the ground just around H-piles. In this study, the mechanism of lateral force acting on passive pile that is in a row, situated in the ground undergoing plastic deformation was discussed, and its theoretical analysis was carried out considering the interval between H-piles. The solution of the theoretical equation derived from here showed resonable characteristic for constants of soil as well as for the interval, widths, and heights of H-pile.

• 한국지반신소재학회논문집
• /
• 제16권3호
• /
• pp.1-10
• /
• 2017

최근 발생하고 있는 자연재해 중 산사태와 관련된 재해는 막대한 인명과 재산피해를 발생시키고 있다. 지속적으로 발생하고 있는 산사태로 인한 피해를 최소화하기 위해서는 계측, 모니터링 시스템 등 관련 기술에 대한 과학적 관리체계가 필요하다. 본 연구는 사면붕괴 예측을 통한 산사태 피해저감을 위한 관리체계 확립을 목적으로 하고 있다. 이를 위해 산사태 발생시 지반거동을 예측하기 위한 표층지반변형률 봉을 제작하고, 사면 붕괴전조로서 변형률 증가를 관측하였다. 그 결과, 사면 붕괴시 지반의 변형은 붕괴 전조 구간, 변형 가속 구간, 변형 급가속 구간을 거친 후 붕괴에 이르는 것으로 나타나, 붕괴 전조 예측과 상관관계가 있는 것으로 판단된다. 모든 조건에서 사면붕괴 전조로서 시간에 따른 변위량의 증가가 공통적으로 관측되었으며, 이는 붕괴위험 사면의 계측 및 유지관리 관점에서 대단히 중요한 현상으로 판단된다. 산사태 발생에 따른 지반변위는 향후 지속적 연구를 통해 사면붕괴예측 및 계측관리기준의 기초자료로 활용될 수 있을 것으로 사료되며, 산사태 피해저감 및 계측산업 활성화에 기여할 수 있을 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제18권4호
• /
• pp.417-426
• /
• 2019

Gangue filling in the goaf is an effective measure to control the surface subsidence. However, due to the obvious deformation of gangue compression, the filling effect deserves to be further studied. To this end, the deformation of coal gangue filling in the goaf is analyzed by theoretical analysis, large-scale crushed rock compression test, and field investigation. Through the compression test of crushed rock, the deformation behaviour characteristics and energy dissipation characteristics is obtained and analysed. The influencing factors of gangue filling and predicted amount of main deformation are summarized. Besides, the predicted equation and filling subsidence coefficients of gangue are obtained. The gangue filling effect was monitored by the movement observation of surface rock. Gangue filling can support the roof of the goaf, effectively control the surface subsidence with little influence on the ground villages. The premeter and equations of the main deformation in the gangue filling are verified, and the subsidence coefficient is further reduced by adding cemented material or fine sand. This paper provides a practical and theoretical reference for further development of gangue filling.

• Geomechanics and Engineering
• /
• 제21권6호
• /
• pp.551-564
• /
• 2020

High-stress and complex geological conditions impose great challenges to maintain excavation stability during deep underground mining. In this research, large anisotropic deformation and its management by support system at a deep underground mine in Western Australia were simulated through three-dimensional finite-difference model. The ubiquitous-joint model was used and calibrated in FLAC3D to reproduce the deformation and failure characteristics of the excavation based on the field monitoring results. After modeling verification, the roles of mining depth also the intercept angle between excavation axis and foliation orientation on the deformation and damage were studied. Based on the results, quantitative relationships between key factors and damage classifications were presented, which can be used as an engineering tool. Subsequently, the performance of support system installation sequences was simulated and compared at four different scenarios. The results show that, first surface support and then reinforcement installation can obtain a better controlling effect. Finally, the influence of bolt spacing and ring spacing were also discussed. The outcomes obtained in this research may play a meaningful reference for facing the challenges in thin-bedded or foliated ground conditions.

• 한국환경복원기술학회지
• /
• 제4권3호
• /
• pp.10-18
• /
• 2001

The existing measurement system to ground-surface displacement survey of the slope has been including the hazard for the measure in site and the difficulty for install, maintenance and control of expensive instruments, which are impossible of whole survey on the slope surface. To overcome of those defects, Softcopy Photogrammertry method is used, which can measure displacement of ground-surface on the slope and structure deformation vectors. Recently, the survey methods applying the advantages of Photogrammetry and Digital Photogrammetry Survey are widely used. In this study, therefore, the development and application of the new instrument mechanism on the the site example are studied. Through the application of Softcopy Photogrammetry, the 3-D data of ground surface on the dangerous slope could be effectively obtained at the long distance, which are obtained through the reform process of contour line. Those are different to the results of the Close-Range Photogrammetry analysis. In ground instrumentation parts, the new practical system shall be the technical base to improve of the instrument machine as well as can be widely applied in civil engineering and others branch.